Audi Audi TTS 2015-present

Audi Audi TTS 2015-present DQ250 Transmission Specifications

Comprehensive technical specifications for the DQ250 6-speed dual-clutch transmission used in the 2015-Present Audi TTS. This document covers detailed performance metrics, torque capacity, gear ratios, fluid specifications, and maintenance guidelines specific to the DQ250 transmission system.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the dq250-transmission specifications for the 2015-Present Audi TTS, including key features, measurements, and technical details

How to Use

Use the search function to locate specific dq250-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections. Each section is labeled with a title and description for easy reference.

Key Specifications

Transmission Type

6-speed DSG

Torque Capacity

400 Nm (295 lb-ft)

Fluid Capacity

7.2 liters (7.6 quarts)

Weight

94 kg (207 lbs)

Shift Time

< 0.2 seconds

Available Specifications

Transmission Design and Construction

Details about the design, materials, and construction of the dq250-transmission

Transmission Type and Configuration

6-speed dual-clutch automatic transmission (DSG)
Wet clutch system for improved durability
Longitudinal mounting for Audi TTS
All-wheel drive (quattro) compatibility

Materials and Weight

Aluminum alloy housing for reduced weight
Total weight: 94 kg (207 lbs)
High-strength steel gears for durability
Sealed unit for improved reliability
Note: Weight includes transmission fluid

Note: The lightweight design contributes to improved fuel efficiency and performance.

Performance Specifications

Technical details about the performance capabilities of the dq250-transmission

Torque Capacity and Gear Ratios

Maximum torque capacity: 400 Nm (295 lb-ft)
1st gear ratio: 3.46:1
2nd gear ratio: 2.15:1
3rd gear ratio: 1.46:1
4th gear ratio: 1.07:1

Shift Times and Efficiency

Shift times: < 0.2 seconds
Optimized for high-performance driving
Improved fuel efficiency compared to traditional automatics
Adaptive shift logic for dynamic driving conditions

Note: Shift times are measured under optimal conditions.

Maintenance and Fluid Specifications

Information about maintenance requirements and fluid specifications for the dq250-transmission

Transmission Fluid Requirements

Recommended fluid: VW/Audi G 052 182 A2
Fluid capacity: 7.2 liters (7.6 quarts)
Fluid change interval: 60,000 miles or 6 years
Note: Use only approved transmission fluid

Service and Maintenance

Sealed transmission unit; no user-serviceable parts
Regular software updates recommended
Inspect for leaks during routine maintenance
Clutch wear monitoring via onboard diagnostics

Note: Software updates are available at authorized Audi service centers.

Integration with Audi TTS

Details about how the dq250-transmission integrates with the Audi TTS powertrain and chassis

Powertrain Compatibility

Designed for 2.0L TFSI engine in Audi TTS
Supports launch control functionality
Integrated with Audi Drive Select system
Optimized for quattro all-wheel drive

Chassis and Drivetrain Integration

Mounted longitudinally for balanced weight distribution
Compatible with Audi Magnetic Ride suspension
Supports dynamic torque vectoring
Note: Requires specific calibration for Audi TTS

Note: The transmission is tuned specifically for the Audi TTS driving dynamics.

Search Specifications

Search by specification name, value, or description

Transmission Specifications

General information

Transmission Type: 6-speed dual-clutch automatic

Manufacturer: Volkswagen Group

Part Number: 0AM300050P

Application: 2015-Present Audi TTS

Weight: 94 kg (207 lbs)

Fluid Type: G 052 182 A2 (Dual Clutch Transmission Fluid)

Dimensions

Length: 600 mm (23.6 in)

Width: 400 mm (15.7 in)

Height: 350 mm (13.8 in)

input Shaft Diameter: 28 mm (1.1 in)

Output Shaft Diameter: 32 mm (1.26 in)

Torque Capacity

Maximum input Torque: 350 Nm (258 lb-ft)

Maximum Output Torque: 400 Nm (295 lb-ft)

Clutch Torque Capacity: 420 Nm (310 lb-ft)

Gear Ratios

1st Gear: 3.46:1

2nd Gear: 2.05:1

3rd Gear: 1.37:1

4th Gear: 1.03:1

5th Gear: 0.84:1

6th Gear: 0.68:1

Reverse Gear: 3.17:1

Fluid Specifications

Fluid Capacity: 7.2 liters (7.6 quarts)

Fluid Change interval: 60,000 miles or 60 months

Fluid Viscosity: SAE 75W-90

Fluid Temperature Range: -40°C to 150°C (-40°F to 302°F)

Clutch System

Clutch Type: Dual wet multi-plate clutch

Clutch Pack Diameter: 200 mm (7.87 in)

Clutch Plate Thickness: 1.5 mm (0.059 in)

Clutch Engagement Pressure: 12 bar (174 psi)

Operational Parameters

Maximum Rpm: 7,000 rpm

Shift Time: 200 ms

Operating Temperature Range: -30°C to 120°C (-22°F to 248°F)

Maximum Fluid Pressure: 20 bar (290 psi)

Maintenance Specifications

Filter Replacement interval: Every 40,000 miles or 48 months

Filter Part Number: 0AM325429

Seal Replacement interval: Every 100,000 miles or 120 months

Seal Part Number: 0AM321115

inspection Interval: Every 20,000 miles or 24 months

Diagnostic Specifications

Diagnostic Tool: VAS 5054A or equivalent

Fault Code Readout: OBD-II compliant

Diagnostic Parameters

Clutch engagement pressure
Gear position sensor data
Fluid temperature
Shift solenoid operation

Diagnostic interval: Every 10,000 miles or 12 months

Safety information

High Pressure Warning: Do not open fluid lines while transmission is pressurized

Temperature Warning: Avoid contact with hot transmission components

Fluid Handling: Use only specified transmission fluid to avoid damage

Safety Gear: Wear gloves and eye protection when servicing

Service Information Service

Detailed service requirements and schedules for the DQ250 transmission

20,000 miles

24 months

Inspect transmission fluid level
Check for leaks
Inspect clutch operation

Ensure all inspections are performed by a certified technician

40,000 miles

48 months

Replace transmission fluid filter
Inspect and clean transmission cooling system
Check and adjust clutch engagement pressure

Use only OEM parts for replacement

60,000 miles

60 months

Replace transmission fluid
Inspect and replace worn seals
Perform diagnostic scan for fault codes

Follow manufacturer's torque specifications during reassembly

Common Questions

Find answers to common questions about torque specifications

What type of transmission is the DQ250?

The DQ250 is a 6-speed dual-clutch transmission (DSG) with a wet clutch system. It is designed for high torque handling, supporting up to 400 Nm of torque, and is commonly used in Audi vehicles, including the 2015-Present Audi TTS.

What is the recommended service interval for the DQ250 transmission?

Audi recommends servicing the DQ250 transmission every 40,000 miles or 4 years, whichever comes first. This includes changing the transmission fluid and filter to ensure optimal performance and longevity.

What type of transmission fluid should be used in the DQ250?

The DQ250 requires a specific dual-clutch transmission fluid, such as Audi Genuine G 052 182 A2. Using the correct fluid is critical to maintaining the transmission's performance and avoiding potential damage.

How does the DQ250 handle performance driving?

The DQ250 is engineered for sporty driving, offering rapid gear shifts and seamless power delivery. Its wet clutch system provides improved heat dissipation, making it suitable for high-performance applications like the Audi TTS.

Can the DQ250 transmission be repaired or does it need to be replaced?

Many components of the DQ250 can be repaired, such as clutches, mechatronics units, and seals. However, severe damage to the transmission case or internal gears may require a full replacement. Always consult a certified Audi technician for diagnosis.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi DQ250 Transmission Service Manual

Coming Soon

Official service manual for the DQ250 transmission, including detailed repair and maintenance procedures.

DQ250 Fluid and Filter Replacement Guide

Coming Soon

Step-by-step guide for replacing the transmission fluid and filter in the DQ250.

Common DQ250 Issues and Solutions

Coming Soon

A comprehensive guide to diagnosing and resolving common issues with the DQ250 transmission.

Audi TTS Transmission Tuning Options

Coming Soon

Information on performance tuning options for the DQ250 transmission in the Audi TTS.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.