Audi Audi TT 2014-present DQ250 Transmission Specifications
Comprehensive technical specifications for the DQ250 6-speed dual-clutch transmission used in the 2014-Present Audi TT. This document covers detailed mechanical, hydraulic, and electronic system specifications, including torque capacity, gear ratios, fluid requirements, and control module integration.
Overview Specifications
Comprehensive description of the dq250-transmission specifications for the 2014-Present Audi TT, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dq250-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections: General Specifications, Gear Ratios, Torque Capacity, and Maintenance.
Key Specifications
Transmission Type
6-speed DSG
Torque Capacity
400 Nm
Fluid Capacity
7.2 liters
Weight
94 kg
Gear Ratios
3.46:1 to 0.69:1
Available Specifications
General Specifications
This section covers the basic technical details and measurements of the dq250-transmission.
General Specifications
This section covers the basic technical details and measurements of the dq250-transmission.
Transmission Type and Configuration
- 6-speed dual-clutch automatic transmission (DSG)
- Transverse-mounted configuration
- Wet clutch system for improved durability
- Designed for front-wheel-drive and all-wheel-drive applications
Dimensions and Weight
- Overall length: 600 mm
- Width: 400 mm
- Height: 350 mm
- Weight: 94 kg (dry weight)
Note: Dimensions and weight may vary slightly depending on the specific model and configuration.
Gear Ratios
This section provides detailed information about the gear ratios of the dq250-transmission.
Gear Ratios
This section provides detailed information about the gear ratios of the dq250-transmission.
Forward Gear Ratios
- 1st gear: 3.46:1
- 2nd gear: 2.15:1
- 3rd gear: 1.46:1
- 4th gear: 1.07:1
- 5th gear: 0.85:1
- 6th gear: 0.69:1
Reverse Gear Ratio
- Reverse gear: 3.17:1
Note: Gear ratios are optimized for performance and fuel efficiency.
Torque Capacity
This section outlines the torque handling capabilities of the dq250-transmission.
Torque Capacity
This section outlines the torque handling capabilities of the dq250-transmission.
Maximum Torque Capacity
- Rated torque capacity: 400 Nm
- Designed for high-performance applications
- Suitable for engines with up to 2.5L displacement
Clutch Torque Capacity
- Wet clutch torque capacity: 350 Nm
- Dual-clutch system for seamless gear shifts
- Enhanced cooling for sustained performance
Note: Torque capacity may vary under extreme operating conditions.
Maintenance
This section provides details on maintenance requirements and fluid specifications for the dq250-transmission.
Maintenance
This section provides details on maintenance requirements and fluid specifications for the dq250-transmission.
Fluid Capacity and Type
- Transmission fluid capacity: 7.2 liters
- Recommended fluid: VW/Audi G 052 182 A2
- Fluid change interval: 60,000 miles or 6 years
Service Intervals
- Inspect transmission fluid every 30,000 miles
- Replace clutch packs as needed based on wear
- Check for software updates at each service interval
Note: Adhere to Audi's recommended service intervals to ensure optimal performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 6-speed dual-clutch automatic
- Manufacturer
- Volkswagen Group
- Model Code
- DQ250
- Applicable Models
-
- 2014-Present Audi TT
- Part Number
- 0AM300048P
Dimensions And Weight
- Length
- 600 mm
- Width
- 400 mm
- Height
- 350 mm
- Weight
- 93 kg
Gear Ratios
- 1st Gear
- 3.46:1
- 2nd Gear
- 2.05:1
- 3rd Gear
- 1.37:1
- 4th Gear
- 1.03:1
- 5th Gear
- 0.84:1
- 6th Gear
- 0.68:1
- Reverse Gear
- 3.17:1
Clutch System
- Clutch Type
- Dual wet multi-plate clutch
- Clutch Pack Diameter
- 225 mm
- Clutch Plate Thickness
- 1.5 mm
- Clutch Fluid Type
- G 052 182 A2
- Clutch Fluid Capacity
- 1.5 liters
Oil Specifications
- Oil Type
- G 052 182 A2
- Oil Capacity
- 7.2 liters
- Oil Change interval
- 60,000 miles or 60 months
- Oil Viscosity
- SAE 75W-90
Operational Parameters
- Maximum Torque
- 400 Nm
- Maximum input Speed
- 8000 rpm
- Operating Temperature Range
- -40°C to 150°C
- Maximum Shift Time
- 200 ms
Cooling System
- Coolant Type
- G 13
- Coolant Capacity
- 1.5 liters
- Coolant Change interval
- 120,000 miles or 120 months
- Cooling System Pressure
- 1.5 bar
Electrical System
- Control Module Part Number
- 0AM927769E
- Sensor Types
-
- Speed sensor
- Temperature sensor
- Pressure sensor
- Voltage Requirement
- 12V
- Current Draw
- 5A
Maintenance Specifications
- Filter Part Number
- 0AM325183
- Filter Change interval
- 60,000 miles or 60 months
- Seal Part Number
- 0AM321371
- Seal Replacement interval
- 120,000 miles or 120 months
- Torque Specifications
- Oil Pan Bolts: 10 NmClutch Cover Bolts: 25 NmControl Module Bolts: 8 Nm
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Codes
-
- P0700
- P0715
- P0720
- P0730
- Diagnostic Tool
- VAS 5054A
- Diagnostic Procedure
- Follow Audi diagnostic protocol
Service Information Service
Detailed service requirements and schedules for the DQ250 transmission
- Transmission oil change
- Filter replacement
- Clutch fluid check
- Coolant level check
Use only Audi-approved fluids and parts
- Seal replacement
- Coolant change
- Comprehensive diagnostic check
Inspect for leaks and wear during service
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ250 transmission in the 2014-Present Audi TT?
What is the torque capacity of the DQ250 transmission in the 2014-Present Audi TT?
The DQ250 transmission, also known as the 02E, has a torque capacity of up to 350 Nm (258 lb-ft). This makes it suitable for high-performance applications, including the Audi TT's turbocharged engines.
Q2 What type of fluid is recommended for the DQ250 transmission in the Audi TT?
What type of fluid is recommended for the DQ250 transmission in the Audi TT?
Audi recommends using genuine VW/Audi G 052 182 A2 dual-clutch transmission fluid. The fluid capacity is approximately 7.2 liters (1.9 gallons), including the torque converter and cooler lines.
Q3 How often should the DQ250 transmission fluid be changed in the Audi TT?
How often should the DQ250 transmission fluid be changed in the Audi TT?
Audi does not specify a fixed interval for transmission fluid changes under normal conditions. However, for severe driving conditions (e.g., frequent towing, stop-and-go traffic), it is recommended to inspect the fluid every 60,000 miles (96,000 km) and replace it if necessary.
Q4 What is the gear ratio configuration of the DQ250 transmission in the Audi TT?
What is the gear ratio configuration of the DQ250 transmission in the Audi TT?
The DQ250 transmission features a 6-speed configuration with the following gear ratios: 1st gear - 3.46, 2nd gear - 2.05, 3rd gear - 1.37, 4th gear - 1.03, 5th gear - 0.84, 6th gear - 0.68. The final drive ratio is 4.24.
Q5 Can the DQ250 transmission handle tuning or increased power output?
Can the DQ250 transmission handle tuning or increased power output?
The DQ250 transmission is robust and can handle moderate tuning. However, for significant power increases (e.g., over 400 Nm), upgrading the clutch packs and ensuring proper cooling is recommended to avoid premature wear or failure.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ250 Transmission Service Manual
Coming SoonOfficial service manual for the DQ250 transmission, including detailed procedures for maintenance, repair, and troubleshooting.
DQ250 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing the transmission fluid in the DQ250, including fluid specifications and safety precautions.
Audi TT DQ250 Transmission Technical Specifications
Coming SoonComprehensive technical specifications for the DQ250 transmission, including gear ratios, torque capacity, and fluid requirements.
DQ250 Transmission Tuning and Upgrades
Coming SoonInformation on tuning and upgrading the DQ250 transmission for enhanced performance, including clutch upgrades and cooling solutions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.