Audi Audi TT 2014-present Body Specifications
Detailed technical specifications and documentation for the body system of the 2014-Present Audi TT, including structural components, materials, dimensions, and assembly details.
Overview Specifications
Comprehensive description of the body specifications for the 2014-Present Audi TT, including key features, measurements, and technical details
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4191 mm
Width
1832 mm
Height
1345 mm
Drag Coefficient
0.30
Curb Weight
1285 kg
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the Audi TT's exterior dimensions, including length, width, height, and wheelbase.
Exterior Dimensions
Detailed measurements and specifications of the Audi TT's exterior dimensions, including length, width, height, and wheelbase.
Overall Dimensions
- Length: 4191 mm
- Width: 1832 mm
- Height: 1345 mm
- Wheelbase: 2505 mm
- Track width (front/rear): 1553 mm / 1521 mm
Ground Clearance and Weight
- Ground clearance: 130 mm
- Curb weight: 1285 kg (base model)
- Gross vehicle weight: 1695 kg
- Weight distribution (front/rear): 58% / 42%
Note: Ground clearance may vary slightly depending on tire size and suspension settings.
Body Structure and Materials
Information on the construction materials and structural design of the Audi TT's body, focusing on rigidity and weight optimization.
Body Structure and Materials
Information on the construction materials and structural design of the Audi TT's body, focusing on rigidity and weight optimization.
Material Composition
- High-strength steel used in key structural areas
- Aluminum components for weight reduction
- Magnesium used in select areas for further weight savings
- Composite materials in non-structural panels
Structural Rigidity
- Torsional rigidity: 24,000 Nm/deg
- Use of laser welding for precision and strength
- Integrated roll-over protection system
- Crash-optimized front and rear structures
Note: Torsional rigidity is a key factor in the vehicle's handling and safety performance.
Aerodynamics
Details on the aerodynamic design of the Audi TT, including drag coefficient and airflow management features.
Aerodynamics
Details on the aerodynamic design of the Audi TT, including drag coefficient and airflow management features.
Drag Coefficient
- Drag coefficient (Cd): 0.30
- Active aerodynamic elements (optional)
- Underbody paneling for improved airflow
- Rear spoiler for downforce optimization
Airflow Management
- Front air intakes for cooling and airflow control
- Side skirts to reduce turbulence
- Rear diffuser for enhanced stability
- Aero-optimized wheel designs
Note: Active aerodynamic elements are available on higher trims and improve performance at higher speeds.
Exterior Features
Overview of the exterior design elements and features that contribute to the Audi TT's aesthetics and functionality.
Exterior Features
Overview of the exterior design elements and features that contribute to the Audi TT's aesthetics and functionality.
Lighting
- Full LED headlights with dynamic turn signals
- LED taillights with sweeping indicators
- Optional Matrix LED headlights
- Daytime running lights with signature Audi design
Design Elements
- Signature Singleframe grille
- Flared wheel arches for a sporty stance
- Frameless doors for a sleek appearance
- Dual exhaust system integrated into the rear bumper
Note: The Singleframe grille design is a hallmark of Audi's modern styling.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4191 mm
- Overall Width
- 1832 mm
- Overall Height
- 1345 mm
- Wheelbase
- 2505 mm
- Track Width Front
- 1565 mm
- Track Width Rear
- 1550 mm
- Ground Clearance
- 125 mm
Weight
- Curb Weight
- 1285 kg
- Gross Vehicle Weight
- 1740 kg
- Payload Capacity
- 455 kg
- Front Axle Load
- 750 kg
- Rear Axle Load
- 990 kg
Body Materials
- Body Structure
- Hybrid construction with aluminum and steel
- Hood Material
- Aluminum
- Doors Material
- Aluminum
- Trunk Lid Material
- Aluminum
- Roof Material
- Steel with optional carbon fiber
Aerodynamics
- Drag Coefficient
- 0.30 Cd
- Frontal Area
- 2.07 m²
- Lift Coefficient Front
- 0.12
- Lift Coefficient Rear
- 0.08
Exterior Features
- Headlights
- LED with optional Matrix LED
- Taillights
- LED with dynamic turn signals
- Mirrors
- Electrically adjustable, heated, and folding
- Wipers
- Rain-sensing with heated washer nozzles
- Sunroof
- Optional panoramic glass roof
interior Features
- Seating Capacity
- 4
- Seat Material
- Leather with optional Nappa leather
- Steering Wheel
- Leather-wrapped with multifunction controls
- Dashboard
- Virtual Cockpit with 12.3-inch display
- Climate Control
- Dual-zone automatic with air quality sensor
Safety Features
- Airbags
- Front: Dual-stageSide: Thorax and head-protectionKnee: Driver-side
- Safety Systems
-
- Electronic Stability Control (ESC)
- Anti-lock Braking System (ABS)
- Traction Control System (TCS)
- Rearview camera
- Parking sensors
- Crash Rating
- 5-star Euro NCAP
Maintenance
- Body Panel Gap Tolerance
- ±1.5 mm
- Paint Thickness
- 120-150 microns
- Corrosion Warranty
- 12 years
- Rust Protection
- Galvanized steel body panels
Diagnostics
- Body Control Module
- Part Number: 8S0907069Diagnostic Tool: ODIS (Offboard Diagnostic Information System)Fault Codes: B1000 - Body Control Module Internal Fault, B1001 - Communication Error with Central Locking, B1002 - Sensor Malfunction
- Sensor Tolerances
- Parking Sensor Range: 0.3-1.5 mRain Sensor Sensitivity: Adjustable in 5 levelsLight Sensor Response Time: 0.5 seconds
Part Numbers
- Hood
- 8S0823101A
- Front Bumper
- 8S0807105B
- Rear Bumper
- 8S0807106C
- Side Mirrors
- 8S0857525D
- Headlight Assembly
- 8S0941007E
Service Information Service
Detailed service requirements and schedules for the Audi TT body
- Inspect body panels for damage or corrosion
- Check and adjust panel gaps if necessary
- Lubricate door hinges and locks
- Inspect and clean sunroof drainage channels
Ensure all body seals are intact and free of cracks
- Inspect and clean exterior lighting components
- Check and recalibrate parking sensors if needed
- Inspect and replace windshield wiper blades
- Verify proper operation of all exterior mirrors
Replace any damaged or worn exterior components
- Inspect and repair any paint damage
- Check and replace rust protection coatings if necessary
- Inspect and replace door seals if worn
- Verify proper operation of all safety systems
Perform a thorough corrosion inspection and treatment
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2014-Present Audi TT?
What are the exterior dimensions of the 2014-Present Audi TT?
The 2014-Present Audi TT has the following exterior dimensions: Length - 4181 mm, Width - 1832 mm, Height - 1343 mm, Wheelbase - 2505 mm. These dimensions may vary slightly depending on the specific trim and optional equipment.
Q2 What materials are used in the construction of the Audi TT body?
What materials are used in the construction of the Audi TT body?
The Audi TT body is constructed using a combination of high-strength steel, aluminum, and composite materials. The use of these materials helps to reduce weight while maintaining structural rigidity and safety. The roof is available in either steel or optional lightweight aluminum, depending on the trim level.
Q3 What is the drag coefficient of the Audi TT?
What is the drag coefficient of the Audi TT?
The Audi TT has a drag coefficient (Cd) of 0.30, which contributes to its aerodynamic efficiency and improved fuel economy. This is achieved through careful design of the body shape, including the front grille, underbody panels, and rear spoiler.
Q4 How does the Audi TT body contribute to safety?
How does the Audi TT body contribute to safety?
The Audi TT body is designed with a rigid safety cell that incorporates high-strength materials and crumple zones to absorb impact energy. It also features advanced safety systems such as side-impact protection beams, reinforced pillars, and a comprehensive airbag system to enhance occupant safety in the event of a collision.
Q5 What is the weight of the Audi TT body?
What is the weight of the Audi TT body?
The weight of the Audi TT body varies depending on the trim and options, but the base model has a curb weight of approximately 1230 kg. The use of lightweight materials such as aluminum and composites helps to keep the weight low, improving performance and fuel efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi TT Body Repair Manual
Coming SoonOfficial Audi repair manual for the 2014-Present TT body, covering procedures for body panel replacement, alignment, and structural repairs.
Audi TT Body Specifications Guide
Coming SoonDetailed guide on the body specifications of the 2014-Present Audi TT, including dimensions, materials, and safety features.
Audi TT Aerodynamics Overview
Coming SoonTechnical overview of the aerodynamic design of the Audi TT, including the role of the body shape and features in achieving a low drag coefficient.
Audi TT Safety Features Documentation
Coming SoonComprehensive documentation on the safety features integrated into the Audi TT body, including crash test results and safety system descriptions.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.