Audi Audi TT 2014-present 2.0L Engine Specifications
Explore detailed technical specifications and documentation for the 2.0L TFSI engine in the 2014-Present Audi TT. Learn about performance metrics, turbocharging, fuel injection, and maintenance procedures.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2014-Present Audi TT, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 2.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
1984 cc
Power Output
228 hp (170 kW)
Torque
258 lb-ft (350 Nm)
Fuel Efficiency
25 mpg city / 34 mpg highway
CO2 Emissions
147 g/km
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency
Power Output
- Maximum power output: 228 hp (170 kW) at 4500-6200 rpm
- Peak torque: 258 lb-ft (350 Nm) at 1600-4300 rpm
- Compression ratio: 9.6:1
- Fuel efficiency: 25 mpg city / 34 mpg highway
- Acceleration (0-60 mph): 5.3 seconds
Fuel System
- Direct fuel injection system
- Fuel tank capacity: 14.5 gallons (55 liters)
- Recommended fuel: Premium unleaded (91 octane or higher)
- Fuel consumption: 8.1 L/100 km combined
Note: Using lower octane fuel may reduce engine performance and efficiency.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials and layout
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials and layout
Engine Block
- Material: Aluminum alloy
- Cylinder arrangement: Inline 4-cylinder
- Bore x Stroke: 82.5 mm x 92.8 mm
- Displacement: 1984 cc
- Valvetrain: DOHC, 16 valves
Cooling System
- Liquid-cooled with electric water pump
- Coolant capacity: 7.5 liters
- Thermostat opening temperature: 87°C (189°F)
- Radiator material: Aluminum
Note: Regular coolant checks are recommended to maintain optimal engine temperature.
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations
Emission Control
- Complies with Euro 6 emissions standards
- Equipped with a catalytic converter
- Exhaust gas recirculation (EGR) system
- Particulate filter: Yes
Environmental Impact
- CO2 emissions: 147 g/km
- NOx emissions: 0.03 g/km
- Particulate matter: 0.001 g/km
- OBD-II compliant
Note: Regular maintenance is required to ensure compliance with emissions standards.
Maintenance and Service
Guidelines for maintaining and servicing the 2.0l-engine, including recommended intervals and procedures
Maintenance and Service
Guidelines for maintaining and servicing the 2.0l-engine, including recommended intervals and procedures
Service Intervals
- Oil change interval: Every 10,000 miles or 12 months
- Spark plug replacement: Every 40,000 miles
- Timing belt replacement: Not applicable (timing chain)
- Air filter replacement: Every 20,000 miles
Fluid Specifications
- Engine oil capacity: 5.7 liters
- Recommended oil grade: 5W-40 synthetic
- Coolant type: G12++ or G13
- Transmission fluid: Audi-approved synthetic oil
Note: Always use manufacturer-recommended fluids to ensure optimal engine performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- EA888 Gen 3
- Displacement
- 2.0 liters
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline (91 RON minimum)
- Manufacturer
- Audi AG
- Production Years
- 2014-Present
Performance Specifications
- Power Output
- 228 hp @ 4500-6200 rpm
- Torque
- 273 lb-ft @ 1600-4300 rpm
- Compression Ratio
- 9.6:1
- Redline
- 6500 rpm
- Top Speed
- 155 mph (electronically limited)
- Acceleration 0 60
- 5.3 seconds
Fuel System
- Fuel injection
- Direct injection
- Fuel Pump Pressure
- 200 bar
- Fuel Filter Part Number
- 06E127401C
- Fuel injector Part Number
- 06E906036C
- Emission Standard
- EU6 / Tier 3
Cooling System
- Coolant Capacity
- 6.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Part Number
- 8S0121251A
- Water Pump Part Number
- 06H121026H
- Coolant Type
- G12++ or G13 (purple)
Lubrication System
- Oil Capacity
- 5.7 liters (with filter)
- Oil Type
- VW 502 00 / 504 00 (5W-40 or 5W-30)
- Oil Filter Part Number
- 06L115562
- Oil Pump Type
- Variable displacement
- Oil Pressure
- 2.5-4.5 bar at 2000 rpm
Ignition System
- Spark Plug Part Number
- 06K905601B
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
- Recommended Replacement interval
- 60,000 miles
Turbocharger System
- Turbo Type
- Single-scroll turbocharger
- Boost Pressure
- 1.2 bar (peak)
- Wastegate Control
- Electronically controlled
- Turbocharger Part Number
- 06K145702H
- intercooler Type
- Air-to-air
- intercooler Part Number
- 8S0145803
Engine Management
- Ecu Part Number
- 8S0907115B
- Software Version
- V12.5.0
- Diagnostic interface
- OBD-II / VAS 5054A
- Sensor References
- Maf Sensor Part Number: 06J906461AMap Sensor Part Number: 06J906051ACrankshaft Position Sensor Part Number: 06E907407C
Maintenance Specifications
- Oil Change interval
- 10,000 miles or 12 months
- Spark Plug Replacement interval
- 60,000 miles
- Timing Chain Replacement Interval
- Lifetime (inspect at 100,000 miles)
- Coolant Replacement interval
- 5 years or 50,000 miles
- Air Filter Replacement interval
- 40,000 miles
- Fuel Filter Replacement interval
- 60,000 miles
Diagnostic Specifications
- Compression Test
- Minimum Compression: 10 barMaximum Variation: 1.5 bar between cylinders
- Leak Down Test
- Maximum Leakage: 10%Acceptable Range: 5-10%
- Turbocharger Diagnostics
- Boost Leak Test Pressure: 1.5 barMaximum Pressure Drop: 0.2 bar over 30 seconds
- Common Fault Codes
-
- P0299 - Underboost condition
- P0300 - Random/Multiple Cylinder Misfire Detected
- P0171 - System Too Lean (Bank 1)
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Oil and filter change
- Inspect brake system
- Check tire pressure and condition
- Inspect all fluid levels
Use only Audi-approved fluids and parts
- Replace air filter
- Inspect timing chain tension
- Check spark plugs
- Inspect turbocharger system
Perform additional checks if vehicle is driven in harsh conditions
- Replace spark plugs
- Replace fuel filter
- Inspect cooling system
- Check engine mounts
Reset service interval reminder after completion
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L TFSI engine in the 2014-Present Audi TT?
What is the horsepower and torque output of the 2.0L TFSI engine in the 2014-Present Audi TT?
The 2.0L TFSI engine in the 2014-Present Audi TT produces 220 horsepower at 4,500-6,200 RPM and 258 lb-ft of torque at 1,600-4,400 RPM. These figures may vary slightly depending on the specific model and trim.
Q2 What type of fuel system does the 2.0L TFSI engine use?
What type of fuel system does the 2.0L TFSI engine use?
The 2.0L TFSI engine utilizes a direct fuel injection system, which delivers fuel directly into the combustion chamber for improved efficiency and performance. It is designed to work with premium unleaded gasoline (91 octane or higher).
Q3 What is the recommended oil type and capacity for the 2.0L TFSI engine?
What is the recommended oil type and capacity for the 2.0L TFSI engine?
The 2.0L TFSI engine requires synthetic engine oil meeting VW 502 00 or VW 504 00 specifications. The oil capacity is approximately 5.7 liters (6.0 quarts) with a filter change. Always refer to the owner's manual for the exact specifications.
Q4 What is the service interval for the 2.0L TFSI engine?
What is the service interval for the 2.0L TFSI engine?
Audi recommends servicing the 2.0L TFSI engine every 10,000 miles or 12 months, whichever comes first. This includes oil changes, filter replacements, and inspections of critical components such as the timing belt and spark plugs.
Q5 Does the 2.0L TFSI engine have a timing belt or chain?
Does the 2.0L TFSI engine have a timing belt or chain?
The 2.0L TFSI engine uses a timing chain, which is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended to ensure proper tension and alignment.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi TT 2.0L TFSI Engine Maintenance Guide
Coming SoonA detailed guide covering routine maintenance procedures, including oil changes, filter replacements, and inspection schedules.
2.0L TFSI Engine Technical Specifications
Coming SoonComprehensive technical specifications for the 2.0L TFSI engine, including torque, horsepower, and fuel system details.
Audi Genuine Parts Catalog
Coming SoonAccess the official Audi parts catalog to find genuine components for the 2.0L TFSI engine, ensuring optimal performance and warranty compliance.
Audi TT Service and Repair Manual
Coming SoonThe official service and repair manual for the 2014-Present Audi TT, including detailed procedures for the 2.0L TFSI engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.