Audi Audi TT 2006-2014

Audi Audi TT 2006-2014 DQ500 Transmission Specifications

Comprehensive technical specifications and service documentation for the DQ500 dual-clutch transmission used in the 2006-2014 Audi TT. Includes detailed information on gear ratios, torque capacity, fluid specifications, maintenance procedures, and troubleshooting guidelines specific to this transmission system.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the dq500-transmission specifications for the 2006-2014 Audi TT, including key features, measurements, and technical details

How to Use

Use the search function to locate specific dq500-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections. Each section is labeled for easy reference.

Key Specifications

Torque Capacity

600 Nm

Gear Ratios

7-speed

Fluid Capacity

7.2 liters

Weight

95 kg

Shift Time

0.2 seconds

Available Specifications

Transmission Design and Architecture

Detailed overview of the dq500-transmission's design, including its dual-clutch system, gear arrangement, and structural components.

Dual-Clutch System

7-speed dual-clutch transmission (DSG)
Two independent clutches for seamless gear shifts
Wet clutch system for improved durability
Maximum torque capacity of 600 Nm

Gear Arrangement

Front-transverse mounted transmission
Compact design for efficient space utilization
Gear ratios optimized for performance and fuel efficiency
Includes reverse gear and parking lock mechanism

Note: The gear ratios are specifically tuned for the Audi TT's sporty driving dynamics.

Performance Specifications

Technical details regarding the dq500-transmission's performance, including shift times, torque handling, and efficiency.

Shift Times

Shift times as low as 0.2 seconds
Adaptive shift logic for dynamic driving conditions
Supports manual and automatic shifting modes
Integrated launch control for optimal acceleration

Torque Handling

Rated for up to 600 Nm of torque
Handles high torque loads without performance degradation
Designed for both high-performance and everyday driving
Compatible with quattro all-wheel-drive system

Maintenance and Fluid Specifications

Guidelines for maintaining the dq500-transmission, including fluid type, capacity, and service intervals.

Transmission Fluid

Requires VW TL 521 82 specification transmission fluid
Fluid capacity of 7.2 liters
Fluid change interval of 60,000 miles or 5 years
Fluid temperature range: -40°C to 150°C

Service Intervals

Regular inspection every 10,000 miles
Clutch wear monitoring via onboard diagnostics
Filter replacement recommended every 40,000 miles
Software updates available for optimized performance

Note: Always use manufacturer-recommended fluids and parts for optimal performance.

Dimensions and Weight

Physical specifications of the dq500-transmission, including dimensions, weight, and mounting details.

Dimensions

Length: 550 mm
Width: 350 mm
Height: 400 mm
Compact design for easy integration into the Audi TT chassis

Weight

Total weight: 95 kg
Lightweight construction for improved vehicle dynamics
Aluminum housing for reduced weight and increased durability
Balanced weight distribution for optimal handling

Search Specifications

Search by specification name, value, or description

Transmission Specifications

General information

Transmission Type: 7-speed dual-clutch automatic

Manufacturer: Audi AG

Model Years: 2006-2014

Vehicle Model: Audi TT

Part Number: 0BH300051Q

Weight: 94 kg (207.2 lbs)

Fluid Type: Audi Genuine Dual Clutch Transmission Fluid (G 052 182 A2)

Gear Ratios

1st Gear: 3.46:1

2nd Gear: 2.15:1

3rd Gear: 1.46:1

4th Gear: 1.07:1

5th Gear: 0.84:1

6th Gear: 0.68:1

7th Gear: 0.56:1

Reverse Gear: 3.01:1

Torque Capacity

Maximum Torque: 600 Nm (442.5 lb-ft)

Recommended Torque Limit: 550 Nm (405.7 lb-ft)

Operational Torque Range: 200-600 Nm (147.5-442.5 lb-ft)

Fluid Specifications

Fluid Capacity: 7.2 liters (7.6 quarts)

Fluid Change interval: 60,000 miles or 60 months

Fluid Viscosity: SAE 75W-90

Fluid Temperature Range: -40°C to 150°C (-40°F to 302°F)

Clutch System

Clutch Type: Dual wet multi-plate clutch

Clutch Pack Diameter: 225 mm (8.86 in)

Clutch Plate Count: 7 plates per clutch

Clutch Actuation: Electro-hydraulic

Clutch Life Expectancy: 150,000-200,000 miles

Operational Parameters

Maximum input Speed: 8,000 rpm

Maximum Output Speed: 6,500 rpm

Shift Response Time: 200 milliseconds

Operational Temperature Range: -30°C to 120°C (-22°F to 248°F)

Maintenance Specifications

Filter Replacement interval: Every 40,000 miles or 48 months

Seal inspection Interval: Every 60,000 miles or 60 months

Clutch Pack inspection Interval: Every 100,000 miles

Fluid Pressure Check interval: Every 30,000 miles or 36 months

Diagnostic Specifications

Diagnostic Tool: VAS 5054A or equivalent

Error Code Readout: OBD-II compliant

Common Fault Codes

P0700 - Transmission Control System Malfunction
P0730 - Incorrect Gear Ratio
P2711 - Unexpected Mechanical Gear Disengagement

Diagnostic Procedure: Perform full system scan and check for stored fault codes

Safety information

High Pressure Warning: Transmission fluid pressure can exceed 20 bar (290 psi)

Hot Surface Warning: Transmission components can exceed 120°C (248°F) during operation

Fluid Handling: Use gloves and eye protection when handling transmission fluid

Related Components

Mechatronic Unit: Part Number: 0BH325025A
Description: Integrated control unit for gear shifting and clutch actuation

input Shaft: Part Number: 0BH311105B
Description: Primary shaft connecting to the engine

Output Shaft: Part Number: 0BH311205C
Description: Secondary shaft connecting to the drivetrain

Service Information Service

Detailed service requirements and schedules for the DQ500 transmission

30,000 miles

36 months

Check transmission fluid level
Inspect for leaks
Perform diagnostic scan

Ensure fluid level is within the specified range

60,000 miles

60 months

Replace transmission fluid
Replace transmission filter
Inspect clutch system

Use only Audi Genuine Dual Clutch Transmission Fluid

100,000 miles

120 months

Inspect clutch pack
Check mechatronic unit functionality
Perform full system diagnostic

Replace clutch pack if wear exceeds manufacturer specifications

Common Questions

Find answers to common questions about torque specifications

What is the torque capacity of the DQ500 transmission in the 2006-2014 Audi TT?

The DQ500 transmission in the 2006-2014 Audi TT has a torque capacity of up to 600 Nm (442 lb-ft), making it suitable for high-performance applications.

What type of fluid is recommended for the DQ500 transmission?

Audi recommends using genuine VW/Audi G 055 529 A2 dual-clutch transmission fluid. The fluid capacity is approximately 7.2 liters (7.6 quarts) for a complete fill, including the torque converter.

How often should the DQ500 transmission fluid be replaced?

Audi does not specify a fixed interval for transmission fluid replacement under normal conditions. However, for severe driving conditions, it is recommended to inspect the fluid every 60,000 miles and replace it if necessary.

What is the gear ratio configuration for the DQ500 transmission?

The DQ500 transmission features a 7-speed configuration with the following gear ratios: 1st gear (3.46), 2nd gear (2.11), 3rd gear (1.46), 4th gear (1.07), 5th gear (0.84), 6th gear (0.70), and 7th gear (0.57). The reverse gear ratio is 3.30.

Can the DQ500 transmission handle tuning or performance upgrades?

Yes, the DQ500 transmission is robust and can handle moderate tuning and performance upgrades. However, exceeding the torque capacity of 600 Nm may require additional modifications or risk damaging the transmission.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi DQ500 Transmission Service Manual

Coming Soon

Official service manual for the DQ500 transmission, including detailed maintenance procedures and specifications.

DQ500 Transmission Fluid Replacement Guide

Coming Soon

Step-by-step guide for replacing the transmission fluid in the DQ500, including safety precautions and required tools.

Audi TT DQ500 Transmission Troubleshooting

Coming Soon

Common issues and troubleshooting tips for the DQ500 transmission in the 2006-2014 Audi TT.

Genuine Audi Transmission Parts Catalog

Coming Soon

Catalog of genuine Audi parts for the DQ500 transmission, including seals, gaskets, and fluid recommendations.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.