Audi Audi TT 2006-2014 DQ250 Transmission Specifications
Detailed technical specifications for the DQ250 transmission system used in the 2006-2014 Audi TT. This document covers transmission components, gear ratios, torque capacity, lubrication requirements, and maintenance procedures specific to the Audi TT model.
Overview Specifications
Comprehensive description of the dq250-transmission specifications for the 2006-2014 Audi TT, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dq250-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or the sidebar menu. Each section is labeled with its respective topic for easy access.
Key Specifications
Transmission Type
6-speed DSG
Torque Capacity
350 Nm
Fluid Capacity
7.2 liters
Shift Time
8 ms
Weight
93 kg
Available Specifications
Transmission Design and Construction
Details about the design, construction, and materials used in the dq250-transmission
Transmission Design and Construction
Details about the design, construction, and materials used in the dq250-transmission
Transmission Type and Configuration
- 6-speed dual-clutch automatic transmission (DSG)
- Wet clutch system with two multi-plate clutches
- Transverse-mounted configuration for front-wheel-drive and all-wheel-drive applications
- Aluminum alloy housing for reduced weight and improved heat dissipation
Clutch System Specifications
- Clutch 1: Handles odd gears (1st, 3rd, 5th) and reverse
- Clutch 2: Handles even gears (2nd, 4th, 6th)
- Clutch plate diameter: 215 mm
- Hydraulic actuation system with integrated mechatronic unit
- Maximum torque capacity: 350 Nm
Note: The wet clutch system ensures consistent performance under high load and temperature conditions.
Gear Ratios and Performance
Technical details about gear ratios, shift times, and performance characteristics
Gear Ratios and Performance
Technical details about gear ratios, shift times, and performance characteristics
Gear Ratios
- 1st gear: 3.46:1
- 2nd gear: 2.15:1
- 3rd gear: 1.46:1
- 4th gear: 1.07:1
- 5th gear: 0.85:1
- 6th gear: 0.69:1
- Reverse gear: 3.17:1
Shift Times and Performance
- Shift times: 8 milliseconds under optimal conditions
- Acceleration from 0-100 km/h: 6.0 seconds (varies by model)
- Top speed: 250 km/h (electronically limited)
- Fuel efficiency: 7.5 L/100 km (combined cycle)
Note: Shift times may vary depending on driving conditions and software calibration.
Fluid and Maintenance Specifications
Information about transmission fluid requirements and maintenance intervals
Fluid and Maintenance Specifications
Information about transmission fluid requirements and maintenance intervals
Transmission Fluid Specifications
- Fluid type: VW/Audi G 052 182 A2 (DSG fluid)
- Fluid capacity: 7.2 liters
- Fluid change interval: 60,000 km or 4 years (whichever comes first)
- Operating temperature range: -40°C to 150°C
Maintenance Procedures
- Regular inspection of the mechatronic unit for software updates
- Check for leaks and wear in the hydraulic system
- Replace clutch packs as needed (typically after 150,000 km)
- Ensure proper fluid level and condition during service intervals
Note: Use only manufacturer-approved fluids and components to maintain warranty and performance.
Mechatronic Unit and Control System
Details about the electronic control system and its functions
Mechatronic Unit and Control System
Details about the electronic control system and its functions
Mechatronic Unit Specifications
- Integrated control unit for gear shifts and clutch actuation
- 12V electrical system with CAN bus communication
- Sensors for gear position, temperature, and pressure
- Self-diagnostic capabilities with fault code storage
Control System Features
- Adaptive shift logic for improved driving dynamics
- Manual mode with paddle shifters or gear lever
- Launch control functionality for optimized acceleration
- Fail-safe mode in case of system malfunction
Note: The mechatronic unit is a critical component and requires specialized tools for servicing.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 6-speed dual-clutch automatic
- Manufacturer
- Volkswagen Group
- Model
- DQ250
- Production Years
- 2006-2014
- Applications
-
- Audi TT (8J)
- Part Number
- 02E 300 051
Technical Specifications
- Gear Ratios
- 1st Gear: 3.46:12nd Gear: 2.15:13rd Gear: 1.46:14th Gear: 1.08:15th Gear: 0.85:16th Gear: 0.69:1Reverse Gear: 3.17:1
- Torque Capacity
- 350 Nm
- Weight
- 93 kg
- Oil Capacity
- 7.2 liters
- Oil Type
- G 052 182 A2 (VW/Audi dual-clutch transmission fluid)
Operational Parameters
- Maximum input Speed
- 8000 rpm
- Maximum Output Speed
- 7000 rpm
- Operating Temperature Range
- -40°C to 150°C
- Shift Response Time
- 8 ms
Clutch System
- Clutch Type
- Dual wet multi-plate clutch
- Clutch Pack Count
- 2
- Clutch Plate Thickness
- 1.5 mm
- Clutch Fluid Type
- G 004 000 (VW/Audi hydraulic fluid)
Mechatronic Unit
- Part Number
- 02E 927 770
- Control Unit Type
- Integrated mechatronic module
- Solenoid Valves
- 12
- Pressure Sensors
- 4
- Temperature Sensors
- 2
Maintenance Specifications
- Oil Change interval
- 60000 miles or 60 months
- Filter Change interval
- 60000 miles or 60 months
- Clutch Life Expectancy
- 150000 miles under normal conditions
- Seal inspection Interval
- 120000 miles or 120 months
Diagnostic Specifications
- Diagnostic Port
- OBD-II
- Fault Codes
-
- P0700
- P0730
- P1701
- P1890
- Diagnostic Tools
-
- VCDS (VAG-COM)
- ODIS (Official Dealer Software)
- Self Diagnostic Capabilities
- Yes
Safety information
- High Voltage Warning
- Mechatronic unit contains high-voltage components
- Oil Temperature Warning
- Do not exceed 150°C to prevent damage
- Clutch Wear indicator
- Monitor via diagnostic software
Related Components
- Drive Shafts
- Part Number: 8J0 407 271Torque Rating: 350 Nm
- Differential
- Type: Front-wheel drive with integrated differentialPart Number: 02E 409 010
- Mounts
- Engine Mount Part Number: 8J0 199 555Transmission Mount Part Number: 8J0 399 151
Tolerances
- Gear Mesh Tolerance
- 0.05 mm
- Clutch Plate Wear Limit
- 0.2 mm
- Oil Pressure Range
- 8-12 bar
Service Information Service
Detailed service requirements and schedules for the DQ250 transmission
- Transmission fluid change
- Filter replacement
- Diagnostic scan for fault codes
- Clutch wear inspection
Use only VW/Audi-approved fluids and parts
- Seal inspection and replacement if necessary
- Mechatronic unit diagnostic check
- Drive shaft inspection
Inspect for leaks and abnormal noises
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ250 transmission in the 2006-2014 Audi TT?
What is the torque capacity of the DQ250 transmission in the 2006-2014 Audi TT?
The DQ250 transmission, also known as the 02E, has a torque capacity of up to 350 Nm (258 lb-ft). This makes it suitable for high-performance applications, including the Audi TT's 2.0T FSI and 3.2L VR6 engines.
Q2 What type of fluid is recommended for the DQ250 transmission?
What type of fluid is recommended for the DQ250 transmission?
Audi recommends using genuine VW/Audi G 052 182 A2 dual-clutch transmission fluid. The fluid capacity is approximately 7.2 liters (7.6 quarts) for a complete fill, including the mechatronics unit.
Q3 How often should the DQ250 transmission fluid be changed?
How often should the DQ250 transmission fluid be changed?
Audi specifies a transmission fluid change interval of every 60,000 miles (96,000 km) or 6 years, whichever comes first. This includes replacing the filter and cleaning the transmission pan.
Q4 What are common symptoms of a failing mechatronics unit in the DQ250 transmission?
What are common symptoms of a failing mechatronics unit in the DQ250 transmission?
Common symptoms include erratic shifting, delayed engagement, transmission slipping, and fault codes such as P2711 (Unexpected Mechanical Gear Disengagement). If these symptoms occur, the mechatronics unit may require repair or replacement.
Q5 Can the DQ250 transmission handle tuning modifications?
Can the DQ250 transmission handle tuning modifications?
Yes, the DQ250 transmission can handle moderate tuning modifications, but it is recommended to stay within its torque capacity of 350 Nm. For higher torque applications, upgrading the clutch packs and mechatronics unit may be necessary.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ250 Transmission Service Manual
Coming SoonOfficial service manual for the DQ250 transmission, covering maintenance, repair, and troubleshooting procedures.
DQ250 Mechatronics Unit Repair Guide
Coming SoonStep-by-step guide for diagnosing and repairing the mechatronics unit in the DQ250 transmission.
Audi TT DQ250 Transmission Fluid Change Tutorial
Coming SoonDetailed tutorial on performing a transmission fluid change for the DQ250 in the Audi TT.
DQ250 Transmission Tuning Guide
Coming SoonComprehensive guide to tuning the DQ250 transmission for improved performance and durability.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.