Audi Audi S8 1996-2011 5.2l-engine Specifications
Detailed technical specifications and documentation for the 5.2L V10 engine in the 1996-2011 Audi S8. Includes performance metrics, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 5.2l-engine specifications for the 1996-2011 Audi S8, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 5.2l-engine specifications by entering keywords such as 'torque', 'displacement', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
5.2 liters (5204 cc)
Max Power
450 hp (336 kW) at 7000 rpm
Max Torque
398 lb-ft (540 Nm) at 3500 rpm
Compression Ratio
12.5:1
Oil Capacity
9.5 liters (with filter)
Available Specifications
Engine Design and Configuration
Details about the design, layout, and configuration of the 5.2l V10 engine
Engine Design and Configuration
Details about the design, layout, and configuration of the 5.2l V10 engine
Engine Layout
- V10 configuration with 90-degree bank angle
- Aluminum alloy block and cylinder heads
- DOHC (Dual Overhead Camshaft) design
- 10 cylinders arranged in two banks of 5 cylinders each
Displacement and Compression
- Displacement: 5.2 liters (5204 cc)
- Bore: 84.5 mm
- Stroke: 92.8 mm
- Compression ratio: 12.5:1
Note: The high compression ratio is optimized for performance and efficiency.
Performance Specifications
Technical details about the engine's power output, torque, and performance characteristics
Performance Specifications
Technical details about the engine's power output, torque, and performance characteristics
Power and Torque
- Maximum power: 450 hp (336 kW) at 7000 rpm
- Maximum torque: 398 lb-ft (540 Nm) at 3500 rpm
- Redline: 7200 rpm
- Specific output: 86.5 hp per liter
Fuel System and Ignition
- Direct fuel injection system
- Sequential multi-point fuel injection
- Electronic ignition system with individual coil packs
- Recommended fuel: Premium unleaded (95 RON or higher)
Note: The direct injection system enhances fuel efficiency and power delivery.
Cooling and Lubrication
Information about the engine's cooling and lubrication systems
Cooling and Lubrication
Information about the engine's cooling and lubrication systems
Cooling System
- Liquid-cooled with a high-capacity radiator
- Dual electric cooling fans
- Coolant capacity: 12.5 liters
- Thermostat opening temperature: 87°C (189°F)
Lubrication System
- Wet sump lubrication system
- Oil capacity: 9.5 liters (with filter)
- Recommended oil grade: 5W-40 synthetic
- Oil pressure: 2.5-4.5 bar at 2000 rpm
Note: Regular oil changes are critical to maintain engine performance and longevity.
Emissions and Compliance
Details about the engine's emissions systems and compliance with regulations
Emissions and Compliance
Details about the engine's emissions systems and compliance with regulations
Emissions Control
- Catalytic converters integrated into the exhaust system
- OBD-II (On-Board Diagnostics) compliance
- Exhaust gas recirculation (EGR) system
- Meets Euro 4 emissions standards
Exhaust System
- Dual exhaust system with stainless steel components
- Exhaust diameter: 70 mm
- Backpressure: 0.25 bar at 6000 rpm
- Tuned for optimal performance and sound
Note: The exhaust system is designed to balance performance and emissions compliance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- BCY
- Displacement
- 5.2 liters (5204 cc)
- Configuration
- V10
- Cylinder Bore
- 84.5 mm
- Piston Stroke
- 92.8 mm
- Compression Ratio
- 12.5:1
- Engine Orientation
- Longitudinal
- Fuel System
- Direct fuel injection
- Fuel Type
- Premium unleaded (95 RON minimum)
- Emission Standard
- EURO 4
Performance Specifications
- Max Power
- 450 hp @ 7000 rpm
- Max Torque
- 398 lb-ft @ 3500 rpm
- Redline
- 7200 rpm
- Idle Speed
- 700-800 rpm
- Acceleration 0 60
- 5.1 seconds
- Top Speed
- 155 mph (electronically limited)
Engine Block
- Material
- Aluminum alloy
- Cylinder Liners
- Alusil-coated
- Main Bearing Caps
- Cast iron
- Crankcase Ventilation
- Closed-loop system
- Oil Capacity
- 9.5 liters (with filter)
- Oil Type
- VW 502 00 / 505 00 specification
Cylinder Head
- Material
- Aluminum alloy
- Valvetrain
- DOHC, 4 valves per cylinder
- Valve Diameter intake
- 38.0 mm
- Valve Diameter Exhaust
- 33.0 mm
- Valve Spring Type
- Dual-coil
- Camshaft Drive
- Timing chain
Fuel System
- Fuel injectors
- Part number: 079 906 036
- Fuel Pressure
- 4.0 bar (58 psi)
- Fuel Pump
- Electric, in-tank
- Fuel Filter
- Part number: 4D0 201 511
- Fuel Rail
- Aluminum, integrated pressure sensor
Ignition System
- Ignition Type
- Coil-on-plug
- Spark Plug
- Part number: 101 000 033 AA
- Spark Plug Gap
- 0.8 mm
- Ignition Coil
- Part number: 06E 905 115 E
- Ignition Timing
- Fully electronic, adaptive
Cooling System
- Coolant Capacity
- 12.5 liters
- Coolant Type
- G12++ (pink)
- Thermostat Opening Temp
- 87°C
- Radiator Core
- Aluminum, dual-pass
- Water Pump
- Mechanical, belt-driven
- Cooling Fan
- Electric, dual-speed
Lubrication System
- Oil Pump
- Gerotor-type
- Oil Filter
- Part number: 06B 115 561
- Oil Pressure
- 2.5-4.5 bar at 2000 rpm
- Oil Cooler
- Integrated, water-to-oil
- Oil Viscosity
- 5W-40 (recommended)
Exhaust System
- Exhaust Manifold
- Stainless steel
- Catalytic Converter
- Part number: 4D0 254 601
- Oxygen Sensors
- Part number: 4D0 998 262
- Exhaust Pipe Diameter
- 70 mm
- Muffler
- Dual, stainless steel
Maintenance Specifications
- Spark Plug Replacement
- Every 60,000 miles
- Timing Chain Inspection
- Every 100,000 miles
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Coolant Replacement
- Every 5 years or 60,000 miles
- Oil Change interval
- Every 10,000 miles or 12 months
- Air Filter Replacement
- Every 40,000 miles
Diagnostic Specifications
- Obd Ii Port Location
- Under dashboard, driver's side
- Diagnostic Trouble Codes
- P0001-P2999 (engine-specific)
- Compression Test
- 12-14 bar (standard)
- Leakdown Test
- Less than 10% leakage
- Idle Control System
- Adaptive, self-learning
Service Information Service
Detailed service requirements and schedules for the 5.2L V10 engine
- Oil and filter change
- Inspect timing chain tension
- Check coolant level and condition
- Inspect spark plugs
Use only VW 502 00 / 505 00 specification oil
- Replace air filter
- Inspect fuel system components
- Check exhaust system for leaks
- Inspect ignition coils
Perform throttle body cleaning if necessary
- Replace spark plugs
- Replace coolant
- Inspect timing chain and guides
- Check valve clearance (hydraulic lifters)
Use only G12++ coolant for replacement
- Replace timing chain and tensioners
- Inspect water pump and thermostat
- Replace fuel filter
- Perform full engine diagnostic scan
Timing chain replacement is critical at this interval
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 5.2L V10 engine in the 1996-2011 Audi S8?
What is the horsepower and torque output of the 5.2L V10 engine in the 1996-2011 Audi S8?
The 5.2L V10 engine in the Audi S8 produces 450 horsepower at 7,000 RPM and 398 lb-ft of torque at 3,500 RPM. This engine is known for its high-revving nature and smooth power delivery.
Q2 What type of fuel system does the 5.2L V10 engine use?
What type of fuel system does the 5.2L V10 engine use?
The 5.2L V10 engine utilizes a direct fuel injection system (FSI), which optimizes fuel delivery for improved performance and efficiency. The system operates at a fuel pressure of approximately 100 bar.
Q3 What is the recommended oil type and capacity for the 5.2L V10 engine?
What is the recommended oil type and capacity for the 5.2L V10 engine?
Audi recommends using fully synthetic 5W-40 engine oil that meets VW 502 00 specifications. The oil capacity is approximately 9.5 liters (10 quarts), including the oil filter.
Q4 What is the service interval for the timing chain on the 5.2L V10 engine?
What is the service interval for the timing chain on the 5.2L V10 engine?
The timing chain on the 5.2L V10 engine is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended every 60,000 miles to ensure proper tension and alignment.
Q5 What is the compression ratio of the 5.2L V10 engine?
What is the compression ratio of the 5.2L V10 engine?
The 5.2L V10 engine has a compression ratio of 12.5:1, which contributes to its high performance and efficiency.
Q6 What type of cooling system does the 5.2L V10 engine use?
What type of cooling system does the 5.2L V10 engine use?
The 5.2L V10 engine uses a liquid cooling system with a dual-circuit design. The system includes an electric water pump and a thermostat that regulates coolant flow to maintain optimal operating temperatures.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S8 5.2L V10 Engine Service Manual
Coming SoonOfficial service manual for the 5.2L V10 engine, covering maintenance, repair procedures, and technical specifications.
5.2L V10 Engine Oil Change Guide
Coming SoonStep-by-step guide for performing an oil change on the 5.2L V10 engine, including recommended tools and materials.
Audi S8 5.2L V10 Timing Chain Inspection Procedure
Coming SoonDetailed instructions for inspecting and maintaining the timing chain on the 5.2L V10 engine.
5.2L V10 Engine Performance Tuning Guide
Coming SoonTechnical guide for optimizing the performance of the 5.2L V10 engine, including ECU tuning and aftermarket upgrades.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.