Audi Audi S7 2019-present

Audi Audi S7 2019-present DL501 Transmission Specifications

Comprehensive technical specifications for the DL501 dual-clutch transmission used in the 2019-Present Audi S7. This document covers detailed operational parameters, torque capacity, gear ratios, fluid specifications, and maintenance guidelines specific to the DL501 transmission system.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the dl501-transmission specifications for the 2019-Present Audi S7, including key features, measurements, and technical details

How to Use

Use the search function to locate specific dl501-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.

Navigate through the documentation sections using the table of contents or by scrolling through the document. Each major section is labeled with a title and includes subsections for detailed information.

Key Specifications

Transmission Type

7-speed dual-clutch automatic

Torque Capacity

600 Nm (442.5 lb-ft)

Fluid Capacity

7.2 liters (7.6 quarts)

Weight

110 kg (242.5 lbs)

Shift Time

0.2 seconds

Available Specifications

Transmission Design and Architecture

Detailed description of the dl501-transmission's design, architecture, and key components

Transmission Type and Configuration

7-speed dual-clutch automatic transmission (S tronic)
Longitudinal mounting for quattro all-wheel drive systems
Wet clutch system for improved thermal management
Integrated mechatronic module for precise gear shifts

Material and Construction

Aluminum alloy housing for reduced weight
High-strength steel gears for durability
Sealed design for improved reliability
Weight: 110 kg (242.5 lbs)

Note: The lightweight design contributes to improved fuel efficiency and performance.

Performance Specifications

Technical details about the dl501-transmission's performance capabilities

Torque Capacity and Gear Ratios

Maximum torque capacity: 600 Nm (442.5 lb-ft)
1st gear ratio: 3.76:1
7th gear ratio: 0.79:1
Final drive ratio: 3.09:1

Shift Times and Efficiency

Shift times as low as 0.2 seconds
Optimized for high-performance driving
Improved fuel efficiency due to reduced internal friction
Supports launch control functionality

Note: The rapid shift times enhance the driving experience, especially in dynamic modes.

Maintenance and Fluid Specifications

Information on maintenance requirements and fluid specifications for the dl501-transmission

Transmission Fluid Requirements

Recommended fluid: Audi Genuine Dual Clutch Transmission Fluid
Fluid capacity: 7.2 liters (7.6 quarts)
Fluid change interval: 60,000 miles or 5 years
Operating temperature range: -40°C to 150°C (-40°F to 302°F)

Maintenance Procedures

Regular inspection of mechatronic unit
Check for fluid leaks during service intervals
Use diagnostic tools for error code reading
Ensure proper calibration after fluid changes

Note: Proper maintenance is critical to ensure longevity and optimal performance.

Integration with Audi S7 Systems

Details on how the dl501-transmission integrates with other systems in the Audi S7

Quattro All-Wheel Drive Integration

Seamless integration with quattro all-wheel drive system
Supports dynamic torque vectoring
Enhanced traction in all driving conditions
Optimized for high-performance handling

Drive Select System Compatibility

Supports Audi Drive Select modes (Comfort, Dynamic, Auto, Individual)
Adaptive shift patterns based on driving mode
Customizable settings for gear shifts
Enhanced responsiveness in Dynamic mode

Note: The integration with Drive Select allows for a tailored driving experience.

Search Specifications

Search by specification name, value, or description

Transmission Specifications

General Specifications

Transmission Type: 7-speed dual-clutch automatic

Manufacturer Part Number: 0B5 300 051

Weight: 94.8 kg (209 lbs)

Fluid Capacity: 7.2 liters (7.6 quarts)

Fluid Type: Audi Genuine Dual Clutch Transmission Fluid (G 052 529 A2)

Performance Parameters

Maximum Torque: 600 Nm (442 lb-ft)

Maximum Power: 331 kW (444 hp)

Shift Time: 200 milliseconds

Operating Temperature Range: -40°C to 150°C (-40°F to 302°F)

Gear Ratios

1st Gear: 3.76:1

2nd Gear: 2.27:1

3rd Gear: 1.52:1

4th Gear: 1.15:1

5th Gear: 0.86:1

6th Gear: 0.69:1

7th Gear: 0.57:1

Reverse Gear: 3.53:1

Clutch Specifications

Clutch Type: Dual wet multi-plate clutch

Clutch Pack Diameter: 225 mm (8.86 in)

Clutch Plate Count: 6 plates per clutch

Clutch Fluid Volume: 1.2 liters (1.27 quarts)

Hydraulic System

Pump Type: Electro-hydraulic

Pump Pressure: 20 bar (290 psi)

Fluid Reservoir Capacity: 0.8 liters (0.85 quarts)

Valve Body Part Number: 0B5 325 025

Electronic Control

Control Module Part Number: 0B5 927 156

Sensor Types

Speed sensors
Temperature sensors
Pressure sensors

Communication Protocol: CAN bus

Software Version: 8K0 927 156 B

Maintenance Specifications

Fluid Change interval: 60,000 miles or 60 months

Filter Change interval: 60,000 miles or 60 months

Seal inspection Interval: 30,000 miles or 30 months

Clutch Wear Limit: 0.5 mm (0.02 in)

Diagnostic Specifications

Fault Codes

P0700
P0715
P0720
P0730

Diagnostic Tool: VAS 6154 or equivalent

Self Diagnosis Capability: Yes

Data Logging: Up to 100 fault codes

Safety information

High Pressure Warning: Hydraulic system operates at high pressure. Avoid direct contact.

Fluid Temperature Warning: Transmission fluid can reach high temperatures. Allow cooling before servicing.

Electrical Safety: Disconnect battery before performing electrical diagnostics.

Related Components

Drive Shaft Part Number: 8K0 407 271

Differential Part Number: 0B5 409 051

Mounting Bracket Part Number: 0B5 399 151

Service Information Service

Detailed service requirements and schedules for the DL501 transmission

30,000 miles

30 months

Inspect transmission seals
Check fluid level and condition
Perform diagnostic scan

Ensure all seals are free from leaks and fluid is at the correct level.

60,000 miles

60 months

Replace transmission fluid
Replace transmission filter
Inspect clutch wear

Use only Audi Genuine Dual Clutch Transmission Fluid.

100,000 miles

100 months

Inspect hydraulic system
Check valve body operation
Perform full diagnostic scan

Replace any worn or damaged components as necessary.

Common Questions

Find answers to common questions about torque specifications

What is the torque capacity of the DL501 transmission in the 2019-Present Audi S7?

The DL501 transmission, also known as the S-Tronic 7-speed dual-clutch transmission, has a torque capacity of up to 600 Nm (442 lb-ft). This makes it suitable for high-performance applications like the Audi S7.

What type of fluid is recommended for the DL501 transmission in the Audi S7?

Audi recommends using genuine Audi Dual Clutch Transmission Fluid (part number G 055 529 A2) for the DL501 transmission. The fluid capacity is approximately 7.2 liters (7.6 quarts), but always refer to the service manual for precise refill specifications.

How often should the DL501 transmission fluid be replaced in the Audi S7?

Audi does not specify a fixed interval for transmission fluid replacement under normal driving conditions. However, for severe driving conditions (e.g., frequent towing, high-performance use, or extreme temperatures), it is recommended to inspect the fluid every 60,000 miles and replace it if necessary.

What is the shift response time of the DL501 transmission in the Audi S7?

The DL501 transmission features a shift response time of less than 0.2 seconds in Dynamic mode, providing rapid gear changes for enhanced performance and driving dynamics.

Can the DL501 transmission handle launch control in the Audi S7?

Yes, the DL501 transmission is equipped with launch control functionality, which optimizes acceleration from a standstill by managing engine torque and clutch engagement for maximum performance.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi DL501 Transmission Service Manual

Coming Soon

Official service manual for the DL501 transmission, covering maintenance, repair, and diagnostic procedures specific to the 2019-Present Audi S7.

Audi S7 Owner's Manual

Coming Soon

Comprehensive guide for Audi S7 owners, including transmission operation, maintenance schedules, and troubleshooting tips.

Audi Genuine Parts Catalog

Coming Soon

Access the official Audi parts catalog to find genuine components for the DL501 transmission and other systems in the Audi S7.

Audi Technical Service Bulletins (TSBs)

Coming Soon

Stay updated with the latest technical service bulletins for the DL501 transmission and other systems in the 2019-Present Audi S7.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.