Audi Audi S7 2019-present 2.9L Engine Specifications
Detailed technical specifications for the 2.9L TFSI V6 engine in the 2019-Present Audi S7. Includes performance metrics, turbocharging details, fuel system specifications, and emissions compliance.
Overview Specifications
Comprehensive description of the 2.9l-engine specifications for the 2019-Present Audi S7, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 2.9l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
2.9 liters (2894 cc)
Horsepower
444 hp (331 kW)
Torque
443 lb-ft (600 Nm)
Compression Ratio
10.5:1
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Design and Architecture
Detailed information on the design, layout, and architecture of the 2.9l-engine
Engine Design and Architecture
Detailed information on the design, layout, and architecture of the 2.9l-engine
Engine Configuration
- V6 configuration with a 90-degree bank angle
- Dual overhead camshaft (DOHC) design
- 24-valve setup with variable valve timing
- Aluminum alloy block and cylinder heads for reduced weight
Combustion System
- Direct fuel injection system with high-pressure injectors
- Compression ratio of 10.5:1
- Twin-turbocharging system for enhanced performance
- Combined MPI and FSI injection technology
Note: The twin-turbo system ensures minimal turbo lag and optimal power delivery.
Performance Specifications
Technical details on the engine's power output, torque, and efficiency
Performance Specifications
Technical details on the engine's power output, torque, and efficiency
Power and Torque
- Maximum power output of 444 horsepower (331 kW) at 5700-6700 rpm
- Peak torque of 443 lb-ft (600 Nm) at 1900-5000 rpm
- 0-60 mph acceleration in 4.5 seconds
- Top speed electronically limited to 155 mph (250 km/h)
Fuel Efficiency
- EPA-estimated fuel economy of 20 mpg city / 29 mpg highway
- CO2 emissions of 213 g/km
- Start-stop system for improved fuel efficiency
- Thermal management system for optimized engine warm-up
Cooling and Lubrication
Details on the engine's cooling and lubrication systems
Cooling and Lubrication
Details on the engine's cooling and lubrication systems
Cooling System
- Dual-circuit cooling system with electric water pump
- High-capacity radiator for efficient heat dissipation
- Integrated intercooler for turbocharged air cooling
- Thermostatically controlled cooling for optimal engine temperature
Lubrication System
- Wet sump lubrication system with variable oil pump
- Oil capacity of 7.5 liters (8.0 quarts)
- Synthetic oil recommended (VW 504 00 / 507 00 specification)
- Oil change interval of 10,000 miles (16,000 km) or 1 year
Note: Regular oil changes are critical to maintaining engine performance and longevity.
Emissions and Compliance
Information on the engine's emissions control and compliance standards
Emissions and Compliance
Information on the engine's emissions control and compliance standards
Emissions Control
- Complies with Euro 6d-TEMP emissions standards
- Dual catalytic converters for reduced exhaust emissions
- Exhaust gas recirculation (EGR) system for lower NOx emissions
- Particulate filter for reduced particulate matter
Onboard Diagnostics
- OBD-II compliant for real-time emissions monitoring
- Integrated lambda sensors for precise air-fuel ratio control
- Diagnostic trouble codes (DTCs) for emissions-related issues
- Automatic fault detection and reporting system
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- CZSE
- Configuration
- V6
- Displacement
- 2894 cc
- Bore
- 84.5 mm
- Stroke
- 86.0 mm
- Compression Ratio
- 10.5:1
- Engine Orientation
- Longitudinal
Performance
- Max Power
- 444 hp @ 5700-6700 rpm
- Max Torque
- 443 lb-ft @ 1900-5000 rpm
- Redline
- 7000 rpm
- Fuel Type
- Premium unleaded (91 octane or higher)
Fuel System
- injection Type
- Direct fuel injection
- injection Pressure
- 200 bar
- Fuel Pump Type
- Electric high-pressure pump
- Fuel Filter Part Number
- 4M0201511
Turbocharging
- Turbo Type
- Twin-turbocharged
- Turbo Boost Pressure
- 1.2 bar
- intercooler Type
- Air-to-water
- Turbo Part Number
- 06K145702H
Lubrication
- Oil Capacity
- 7.6 liters
- Oil Type
- VW 504 00 / VW 507 00
- Oil Filter Part Number
- 06L115562B
- Oil Pump Type
- Variable displacement
Cooling System
- Coolant Capacity
- 12.5 liters
- Coolant Type
- G13 (purple)
- Thermostat Opening Temperature
- 87°C
- Water Pump Type
- Electric
Ignition System
- Spark Plug Type
- NGK PLFER7A8EG
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
Emissions
- Emission Standard
- Euro 6d-TEMP
- Catalytic Converter Type
- Twin close-coupled
- Oxygen Sensor Part Number
- 06E906262C
- EGR System
- Integrated with turbocharging
Maintenance
- Spark Plug Replacement interval
- 60,000 miles
- Timing Chain Type
- Dual-row, maintenance-free
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Service interval
- 10,000 miles or 12 months
Diagnostics
- OBD Port Location
- Driver's side, under dashboard
- Diagnostic Trouble Codes
- ISO 15765-4 CAN
- Onboard Diagnostic System
- OBD-II compliant
- Diagnostic Software
- VAS 6154 or equivalent
Service Information Service
Detailed service requirements and schedules for the 2.9l-engine
- Oil and filter change
- Inspect spark plugs
- Check coolant level and condition
- Inspect air filter
- Check turbocharger system for leaks
Use only Audi-approved fluids and parts
- Replace spark plugs
- Inspect timing chain tensioner
- Check fuel injectors
- Inspect turbocharger components
- Replace cabin air filter
Perform comprehensive engine diagnostics
- Replace timing chain (if necessary)
- Inspect and replace coolant hoses
- Check and replace engine mounts
- Inspect and clean intake valves
Consult Audi service manual for detailed procedures
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.9L TFSI engine in the 2019-Present Audi S7?
What is the horsepower and torque output of the 2.9L TFSI engine in the 2019-Present Audi S7?
The 2.9L TFSI V6 engine in the Audi S7 produces 444 horsepower at 5700-6700 RPM and 443 lb-ft of torque at 1900-5000 RPM. This engine is paired with a 48V mild-hybrid system for enhanced performance and efficiency.
Q2 What type of fuel system does the 2.9L TFSI engine use?
What type of fuel system does the 2.9L TFSI engine use?
The 2.9L TFSI engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved combustion efficiency and power output. It is designed to run on premium unleaded gasoline with an octane rating of 91 or higher.
Q3 What is the compression ratio of the 2.9L TFSI engine?
What is the compression ratio of the 2.9L TFSI engine?
The 2.9L TFSI engine has a compression ratio of 10.5:1, which balances performance and fuel efficiency while maintaining compatibility with premium fuel.
Q4 What is the recommended oil type and capacity for the 2.9L TFSI engine?
What is the recommended oil type and capacity for the 2.9L TFSI engine?
Audi recommends using synthetic engine oil meeting VW 504 00 or VW 508 00 specifications. The oil capacity is approximately 7.5 liters (7.9 quarts), including the oil filter. Always refer to the owner's manual for the exact specifications.
Q5 Does the 2.9L TFSI engine require specific maintenance intervals?
Does the 2.9L TFSI engine require specific maintenance intervals?
Yes, Audi recommends an oil change every 10,000 miles or 12 months, whichever comes first. Additionally, the engine's timing belt, spark plugs, and air filters should be inspected and replaced as per the maintenance schedule outlined in the owner's manual.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S7 Owner's Manual
Coming SoonThe official owner's manual for the 2019-Present Audi S7, containing detailed information on the 2.9L TFSI engine, maintenance schedules, and operational guidelines.
2.9L TFSI Engine Technical Specifications
Coming SoonA comprehensive technical document outlining the specifications, performance metrics, and design features of the 2.9L TFSI engine.
Audi Genuine Parts Catalog
Coming SoonAccess the official Audi parts catalog to find genuine components for the 2.9L TFSI engine, ensuring optimal performance and warranty compliance.
Audi Service and Maintenance Guide
Coming SoonA detailed guide on recommended service procedures, intervals, and safety precautions for maintaining the 2.9L TFSI engine in the Audi S7.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.