Audi Audi S6 2018-present

Audi Audi S6 2018-present Suspension Specifications

Explore the detailed suspension system specifications for the 2018-Present Audi S6, including front and rear suspension components, alignment settings, and performance tuning data.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the suspension specifications for the 2018-Present Audi S6, including key features, measurements, and technical details. This section covers the advanced suspension system designed for performance, comfort, and handling precision.

How to Use

Use the search function to locate specific suspension components or specifications by entering keywords such as 'shock absorbers', 'spring rates', or 'ride height'.

Navigate through the suspension documentation by selecting the relevant section from the table of contents. Each section is organized by component type and includes detailed technical data.

Key Specifications

Front Spring Rate

28 N/mm

Rear Spring Rate

32 N/mm

Ride Height Adjustment

15 mm to 25 mm

Anti-Roll Bar Diameter

22 mm

Maximum Load Capacity

600 kg

Available Specifications

Front Suspension

Details of the front suspension system, including the multi-link setup, shock absorbers, and spring specifications.

Multi-Link Suspension Design

Five-link independent front suspension for precise handling
Aluminum components for reduced weight and improved performance
Wheel camber angle: -0.5° to -1.5° (adjustable)
Caster angle: 7.5° to 8.5°
Toe-in: 0.05° to 0.15°

Shock Absorbers and Springs

Adaptive air suspension with dynamic damping control
Front spring rate: 28 N/mm
Shock absorber travel: 120 mm
Ride height adjustment range: 15 mm to 25 mm
Optional sport suspension with 10% stiffer springs

Note: The adaptive air suspension system adjusts damping force based on driving conditions and mode selection.

Rear Suspension

Technical details of the rear suspension system, including the trapezoidal-link setup and adaptive damping.

Trapezoidal-Link Suspension Design

Trapezoidal-link independent rear suspension for stability
Aluminum construction for weight reduction
Wheel camber angle: -1.0° to -2.0° (adjustable)
Toe-in: 0.10° to 0.20°
Anti-roll bar diameter: 22 mm

Adaptive Damping System

Electronically controlled dampers with three modes: Comfort, Auto, and Dynamic
Rear spring rate: 32 N/mm
Shock absorber travel: 130 mm
Ride height adjustment range: 15 mm to 25 mm
Optional rear-wheel steering for improved agility

Note: The adaptive damping system adjusts in real-time to road conditions and driver inputs.

Air Suspension System

Comprehensive details of the adaptive air suspension system, including its components and functionality.

Air Spring Units

Dual-chamber air springs for variable stiffness
Air pressure range: 8 bar to 12 bar
Load leveling system for consistent ride height
Maximum load capacity: 600 kg
Automatic leveling during cornering and acceleration

Control System

Integrated control unit with CAN bus communication
Adjustable ride height in four levels: Lift, Comfort, Auto, and Dynamic
Response time: 0.2 seconds for damping adjustments
Compatible with Audi Drive Select system
Diagnostic interface for service and troubleshooting

Note: The air suspension system can be manually adjusted via the MMI interface or automatically based on driving conditions.

Wheel Alignment Specifications

Detailed wheel alignment settings for optimal handling and tire wear.

Front Wheel Alignment

Camber: -0.5° to -1.5°
Caster: 7.5° to 8.5°
Toe-in: 0.05° to 0.15°
Steering axis inclination: 12.5°
Maximum turning angle: 38°

Rear Wheel Alignment

Camber: -1.0° to -2.0°
Toe-in: 0.10° to 0.20°
Thrust angle: 0°
Anti-roll bar diameter: 22 mm
Optional rear-wheel steering angle: ±2.5°

Note: Regular alignment checks are recommended to maintain optimal handling and tire longevity.

Search Specifications

Search by specification name, value, or description

Component Specifications

Front Suspension

Type: Five-link independent suspension

Spring Type: Coil spring with adaptive air suspension option

Shock ABSorber Type: Electronically controlled damping system

Stabilizer Bar Diameter: 28 mm

Wheel Alignment: Camber: -0.5 to 0.5 degrees
Toe: 0.1 to 0.3 degrees
Caster: 7.5 to 8.5 degrees

Part Numbers: Strut Assembly: 8W0413031
Control Arm: 8W0407151
Stabilizer Link: 8W0411311

Rear Suspension

Type: Five-link independent suspension

Spring Type: Coil spring with adaptive air suspension option

Shock ABSorber Type: Electronically controlled damping system

Stabilizer Bar Diameter: 22 mm

Wheel Alignment: Camber: -1.5 to -0.5 degrees
Toe: 0.1 to 0.3 degrees

Part Numbers: Strut Assembly: 8W0513031
Control Arm: 8W0507151
Stabilizer Link: 8W0511311

Adaptive Air Suspension

System Type: Audi Adaptive Air Suspension with continuous damping control

Ride Height Adjustment Range: 25 mm

Compressor Power: 200 W

Air Spring Pressure Range: 8 to 16 bar

Part Numbers: Air Spring: 8W0511311
Compressor: 8W0907657
Control Module: 8W0907373

Wheel Bearings

Front Wheel Bearing Type: Sealed roller bearing

Rear Wheel Bearing Type: Sealed roller bearing

Torque Specifications: Front Wheel Bearing Bolt: 200 Nm + 180 degrees
Rear Wheel Bearing Bolt: 150 Nm + 90 degrees

Part Numbers: Front Wheel Bearing: 8W0407625
Rear Wheel Bearing: 8W0507625

Suspension Bushings

Material: Rubber with polyurethane options

Front Control Arm Bushing Durometer: 70 Shore A

Rear Control Arm Bushing Durometer: 65 Shore A

Part Numbers: Front Bushing: 8W0407151B
Rear Bushing: 8W0507151B

Suspension Limits

Maximum Load: 600 kg

Maximum Speed With Adaptive Suspension: 250 km/h

Minimum Ride Height: 120 mm

Maximum Ride Height: 170 mm

Diagnostic Specifications

Fault Codes

C10A400: Suspension level control system
C10A500: Adaptive air suspension fault
C10A600: Damping system malfunction

Diagnostic Tools

Audi VAS 6154
ODIS (Offboard Diagnostic Information System)

Diagnostic Procedures

Check air suspension compressor for leaks
Verify damping system calibration
Inspect ride height sensors for proper alignment

Maintenance Specifications

inspection Intervals

Miles: 10000, Months: 12, Items: Inspect suspension components for wear,Check ride height alignment,Verify adaptive suspension functionality

Lubrication Points

Control arm bushings
Stabilizer bar links
Wheel bearings

Torque Specifications: Strut Mount Bolts: 90 Nm + 90 degrees
Control Arm Bolts: 120 Nm + 90 degrees
Stabilizer Link Nuts: 50 Nm

Safety information

Warnings

Do not exceed maximum load capacity
Ensure proper alignment after suspension modifications
Always use Audi-approved components for repairs

Precautions

Disconnect battery before working on adaptive suspension
Use proper lifting points when raising the vehicle
Follow torque specifications precisely

Service Information Service

Detailed service requirements and schedules for the Audi S6 suspension system

10000

Inspect suspension components for wear
Check ride height alignment
Verify adaptive suspension functionality

Service intervals may vary based on driving conditions

50000

Replace suspension bushings if necessary
Inspect and lubricate wheel bearings
Check adaptive air suspension for leaks

Perform detailed inspection of all suspension components

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of suspension system does the 2018-Present Audi S6 use?

The 2018-Present Audi S6 features an adaptive air suspension system with dynamic ride control. This system includes air springs and electronically controlled dampers, allowing for adjustable ride height and stiffness based on driving conditions and driver preferences.

What is the ground clearance range of the Audi S6 with adaptive air suspension?

The ground clearance of the Audi S6 with adaptive air suspension ranges from 120 mm (4.7 inches) in the lowest setting to 165 mm (6.5 inches) in the highest setting. This range can be adjusted manually or automatically based on driving mode and speed.

How does the dynamic ride control system improve handling?

The dynamic ride control system uses interconnected hydraulic dampers to reduce body roll during cornering and improve stability. It adjusts damping forces in real-time to counteract pitch and roll, providing a smoother and more controlled driving experience.

What are the recommended tire pressures for the Audi S6 with adaptive air suspension?

The recommended tire pressures for the Audi S6 are 36 psi (2.5 bar) for the front tires and 39 psi (2.7 bar) for the rear tires under normal load conditions. These values may vary slightly depending on load and driving conditions, as specified in the owner's manual.

Can the suspension system be manually adjusted?

Yes, the suspension system can be manually adjusted through the Audi Drive Select system. Drivers can choose between Comfort, Auto, Dynamic, and Individual modes, each offering different suspension stiffness and ride height settings.

What is the maximum load capacity for the Audi S6 with adaptive air suspension?

The maximum load capacity for the Audi S6 with adaptive air suspension is 1,985 lbs (900 kg), including passengers and cargo. Exceeding this limit may compromise suspension performance and safety.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S6 Adaptive Air Suspension Technical Guide

Coming Soon

A detailed guide explaining the operation, maintenance, and troubleshooting of the adaptive air suspension system in the Audi S6.

Audi Drive Select System Overview

Coming Soon

Learn how to customize your driving experience using the Audi Drive Select system, including suspension settings.

Audi S6 Suspension Maintenance Checklist

Coming Soon

A step-by-step checklist for maintaining the adaptive air suspension system, including inspection intervals and common issues.

Genuine Audi Suspension Parts Catalog

Coming Soon

Access the official catalog of genuine Audi suspension components for the S6, ensuring optimal performance and warranty compliance.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.