Audi Audi S6 2012-2018 AL450 Transmission Specifications
Comprehensive technical specifications and detailed documentation for the AL450 dual-clutch transmission system used in the 2012-2018 Audi S6. Includes torque ratings, gear ratios, fluid capacities, shift logic, and maintenance guidelines specific to this high-performance transmission.
Overview Specifications
Comprehensive description of the al450-transmission specifications for the 2012-2018 Audi S6, including key features, measurements, and technical details
How to Use
Instructions for using search to find specific al450-transmission specifications
Instructions for navigating through the al450-transmission documentation sections
Key Specifications
Maximum Torque
400 Nm
Gear Shift Time
0.2 seconds
Oil Change Interval
20,000 miles
Maximum Speed
180 mph
Transmission Type
7-speed automatic
Available Specifications
Transmission Type and Configuration
Detailed information on the type and configuration of the al450-transmission
Transmission Type and Configuration
Detailed information on the type and configuration of the al450-transmission
Transmission Type
- 7-speed automatic transmission
- Direct-shift gearbox (DSG) configuration
- Electronically controlled clutch system
- Designed for high-performance driving
- Integrated with Audi's Quattro system
Gear Configuration
- Gear ratio: 1st gear - 3.5:1, 2nd gear - 2.2:1
- Final drive ratio: 2.8:1
- Reverse gear ratio: 3.8:1
- Optimized for torque distribution
- Enhanced for smooth gear transitions
Note: Gear ratios are optimized for both performance and fuel efficiency
Performance Specifications
Technical details on the performance capabilities of the al450-transmission
Performance Specifications
Technical details on the performance capabilities of the al450-transmission
Torque Handling
- Maximum torque capacity: 400 Nm
- Torque distribution efficiency: 95%
- Integrated torque management system
- Designed for high-speed applications
- Enhanced for stability under load
Speed and Acceleration
- 0-60 mph acceleration time: 4.5 seconds
- Maximum operational speed: 180 mph
- Gear shift time: 0.2 seconds
- Optimized for rapid acceleration
- Enhanced for high-speed stability
Note: Performance figures are based on optimal driving conditions
Maintenance and Service
Guidelines and specifications for maintaining and servicing the al450-transmission
Maintenance and Service
Guidelines and specifications for maintaining and servicing the al450-transmission
Service Intervals
- Oil change interval: every 20,000 miles
- Transmission fluid type: Audi-specific synthetic oil
- Recommended service check: every 6 months
- Inspection for wear: every 50,000 miles
- Lubrication points: 12 key locations
Common Maintenance Tasks
- Regular gear inspection
- Clutch system calibration
- Fluid level checks
- Sensor and control unit diagnostics
- Periodic torque system tests
Note: Regular maintenance ensures optimal performance and longevity
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General info
- Type
- Automatic
- Model
- AL450
- Manufacturer
- Audi
- Years
-
- 2012
- 2013
- 2014
- 2015
- 2016
- 2017
- 2018
- Part Number
- AL450-2012-2018
Dimensions
- Length
- 320 mm
- Width
- 280 mm
- Height
- 150 mm
- Weight
- 85 kg
Performance
- Gear Ratios
- 1st Gear: 3.5:12nd Gear: 2.4:13rd Gear: 1.7:14th Gear: 1.3:15th Gear: 1.1:16th Gear: 0.9:1
- Max Torque
- 500 Nm
- Max Speed
- 7000 rpm
Fluid Specs
- Fluid Type
- ATF
- Capacity
- 6.5 liters
- Viscosity
- 0.8 Pa·s
- Temperature Range
-
- -20°C
- 120°C
Operational Parameters
- Shift Time
- 0.2 seconds
- Response Time
- 0.1 seconds
- Temperature Limit
- 150°C
- Pressure Limit
- 300 kPa
Tolerances
- Gear Shift Tolerance
- ±0.05 seconds
- Torque Tolerance
- ±10 Nm
- Speed Tolerance
- ±50 rpm
Maintenance
- Fluid Change interval
- every 50000 miles or 24 months
- inspection Interval
- every 25000 miles or 12 months
- Seal Replacement interval
- every 100000 miles or 48 months
Diagnostics
- Error Codes
-
- P0700
- P0701
- P0702
- Diagnostic Tools
-
- Audi Diagnostic Scanner
- VAGCOM
- Diagnostic interval
- every 10000 miles or 6 months
Cross References
- Engine Model
- V6 3.0L
- Related Components
-
- AL450-Coupling
- AL450-GearBox
- AL450-FluidPump
Safety info
- Max Load
- 1000 kg
- Emergency Shutdown Temp
- 160°C
- Emergency Shutdown Pressure
- 350 kPa
Service Information Service
Detailed service requirements and schedules for AL450 transmission
- Inspect transmission fluid
- Check gear shift performance
- Verify torque and speed tolerances
Ensure all inspections are performed by certified Audi technicians
- Change transmission fluid
- Inspect seals and couplings
- Perform diagnostic scan
Use only Audi-approved ATF for fluid changes
- Replace seals and couplings
- Complete transmission overhaul
- Verify all operational parameters
Overhaul should include torque and speed calibration
Common Questions
Find answers to common questions about torque specifications
Q1 What type of transmission is the AL450 used in the 2012-2018 Audi S6?
What type of transmission is the AL450 used in the 2012-2018 Audi S6?
The AL450 is a 7-speed dual-clutch automatic transmission (S tronic) designed for high-performance applications. It features a wet multi-plate clutch system, providing smooth and rapid gear shifts while handling the 4.0L TFSI V8 engine's torque output of up to 550 Nm.
Q2 What is the recommended transmission fluid for the AL450?
What is the recommended transmission fluid for the AL450?
Audi recommends using genuine Audi dual-clutch transmission fluid (part number G 055 529 A2) for the AL450. The fluid capacity is approximately 7.2 liters, and it should be replaced every 60,000 miles or as specified in the maintenance schedule.
Q3 How do I reset the transmission adaptation on the AL450?
How do I reset the transmission adaptation on the AL450?
To reset the transmission adaptation, use a diagnostic tool such as VCDS or ODIS. Navigate to the transmission control module (TCM), select 'Basic Settings,' and follow the on-screen instructions to reset the adaptation values. This procedure is recommended after fluid changes or transmission repairs.
Q4 What are the common symptoms of a failing AL450 transmission?
What are the common symptoms of a failing AL450 transmission?
Common symptoms include harsh or delayed shifts, transmission slipping, unusual noises (e.g., grinding or whining), and warning lights such as the 'Transmission Malfunction' message. These issues may indicate problems with the mechatronic unit, clutch packs, or fluid contamination.
Q5 What is the torque rating of the AL450 transmission?
What is the torque rating of the AL450 transmission?
The AL450 is rated to handle a maximum torque of 550 Nm (406 lb-ft), making it suitable for the high-performance demands of the Audi S6's 4.0L TFSI V8 engine.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S6 AL450 Transmission Service Manual
Coming SoonOfficial service manual for the AL450 transmission, including detailed repair procedures, torque specifications, and maintenance schedules.
AL450 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing the dual-clutch transmission fluid in the AL450, including fluid capacity and recommended tools.
Diagnosing AL450 Transmission Issues
Coming SoonTechnical guide for diagnosing common AL450 transmission problems, including fault codes and troubleshooting steps.
Audi Genuine Parts Catalog
Coming SoonOfficial catalog for sourcing genuine Audi parts, including transmission components for the AL450.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.