Audi Audi S6 1994-1997 VL300 Transmission Specifications
Comprehensive technical specifications and service details for the VL300 transmission system used in the 1994-1997 Audi S6. This document covers transmission design, gear ratios, torque capacity, fluid requirements, and maintenance procedures specific to the VL300 transmission.
Overview Specifications
Comprehensive description of the vl300-transmission specifications for the 1994-1997 Audi S6, including key features, measurements, and technical details
How to Use
Use the search bar to find specific vl300-transmission specifications by entering keywords like 'gear ratios', 'torque capacity', or 'fluid type'.
Navigate through the documentation using the table of contents or section headers to locate detailed information on specific components or measurements.
Key Specifications
Transmission Type
5-speed manual
Torque Capacity
300 Nm
Fluid Capacity
2.5 liters
Weight
45 kg
Gear Ratios
3.50:1 to 0.84:1
Available Specifications
Transmission Design
Detailed description of the vl300-transmission's design and architecture
Transmission Design
Detailed description of the vl300-transmission's design and architecture
Basic Design Features
- 5-speed manual transmission
- All-wheel drive compatibility
- Cast aluminum housing for reduced weight
- Helical cut gears for smoother operation
Gear Ratios
- 1st Gear: 3.50:1
- 2nd Gear: 2.11:1
- 3rd Gear: 1.46:1
- 4th Gear: 1.07:1
- 5th Gear: 0.84:1
Note: Gear ratios optimized for performance and fuel efficiency
Performance Specifications
Technical details about the vl300-transmission's performance capabilities
Performance Specifications
Technical details about the vl300-transmission's performance capabilities
Torque Capacity
- Maximum torque capacity: 300 Nm
- Designed for high-performance engines
- Reinforced gear sets for durability
- Handles up to 5000 RPM continuously
Shift Mechanism
- Short-throw shifter for precise gear changes
- Synchronized on all forward gears
- Ball-bearing linkage for reduced friction
- Engagement force: 20-25 N
Maintenance and Service
Guidelines for maintaining and servicing the vl300-transmission
Maintenance and Service
Guidelines for maintaining and servicing the vl300-transmission
Fluid Specifications
- Recommended fluid: SAE 75W-90 synthetic gear oil
- Fluid capacity: 2.5 liters
- Change interval: Every 60,000 km
- Use of OEM fluid recommended
Inspection and Adjustment
- Check gear oil level every 10,000 km
- Inspect clutch linkage for wear
- Adjust shift linkage if necessary
- Ensure proper torque on mounting bolts
Note: Regular inspection ensures optimal performance and longevity
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 5-speed manual
- Model Code
- VL300
- Manufacturer
- Audi
- Applicable Years
-
- 1994
- 1995
- 1996
- 1997
- Vehicle Model
- Audi S6 (C4)
- Part Number
- 012 300 043 B
Gear Ratios
- 1st Gear
- 3.50:1
- 2nd Gear
- 2.06:1
- 3rd Gear
- 1.37:1
- 4th Gear
- 1.03:1
- 5th Gear
- 0.84:1
- Reverse Gear
- 3.17:1
Torque Capacity
- Maximum Torque
- 310 Nm
- Recommended Torque Limit
- 300 Nm
- Tolerance
- +/- 5 Nm
Fluid Specifications
- Fluid Type
- Synthetic Gear Oil
- Viscosity
- 75W-90
- Capacity
- 2.6 liters
- Manufacturer Specification
- G 052 911 A2
- Change interval
- Every 60,000 miles or 60 months
Clutch Specifications
- Clutch Type
- Single dry plate
- Clutch Diameter
- 240 mm
- Clutch Material
- Organic
- Part Number
- 034 141 033 C
- Torque Rating
- 300 Nm
Synchronizers
- Type
- Double-cone synchronizers
- Material
- Brass
- Wear Limit
- 0.5 mm
- Replacement Part Number
- 012 311 301 D
Shift Mechanism
- Shift Type
- Mechanical linkage
- Shift Throw
- 45 mm
- Shift Effort
- 15-20 N
- Adjustment interval
- Every 30,000 miles
Differential Specifications
- Type
- Limited-slip differential
- Ratio
- 4.11:1
- Oil Capacity
- 1.2 liters
- Oil Type
- Synthetic 75W-90
- Part Number
- 012 409 101 A
Operational Limits
- Maximum Rpm
- 7,000 rpm
- Maximum Speed
- 250 km/h
- Temperature Range
- -40°C to 120°C
- Warning Temperature
- 110°C
Diagnostic Specifications
- Diagnostic Port
- OBD-I
- Fault Codes
-
- P0700
- P0705
- P0715
- Diagnostic Tool
- VAG 1551
- Common Issues
-
- Gear slippage
- Hard shifting
- Noise in neutral
Service Information Service
Detailed service requirements and schedules for the VL300 transmission
- Inspect clutch operation
- Check transmission fluid level
- Inspect shift linkage for wear
Ensure all bolts are torqued to specification
- Replace transmission fluid
- Inspect synchronizers
- Check differential oil level
Use only manufacturer-recommended fluids
- Replace clutch assembly
- Inspect gear teeth for wear
- Check for leaks
Replace worn components immediately
Common Questions
Find answers to common questions about torque specifications
Q1 What type of transmission fluid is recommended for the vl300-transmission in a 1994-1997 Audi S6?
What type of transmission fluid is recommended for the vl300-transmission in a 1994-1997 Audi S6?
The vl300-transmission requires Audi Genuine G 052 162 A2 transmission fluid. This synthetic fluid is specifically formulated for the transmission's hydraulic and lubrication needs. The capacity is approximately 3.5 liters (3.7 quarts) when dry, but always confirm the exact level using the dipstick or fill procedure outlined in the service manual.
Q2 What is the torque specification for the vl300-transmission mounting bolts?
What is the torque specification for the vl300-transmission mounting bolts?
The torque specification for the vl300-transmission mounting bolts is 40 Nm (30 lb-ft). Ensure all bolts are tightened in a crisscross pattern to avoid uneven stress on the transmission housing.
Q3 How do I diagnose a slipping vl300-transmission in my Audi S6?
How do I diagnose a slipping vl300-transmission in my Audi S6?
Slipping in the vl300-transmission can be caused by low fluid levels, worn clutch packs, or a failing torque converter. First, check the transmission fluid level and condition. If the fluid is dark or has a burnt smell, a fluid and filter change is recommended. If the issue persists, inspect the clutch packs and torque converter. Professional diagnostic tools, such as VAG-COM, are recommended for accurate fault code reading.
Q4 What is the recommended service interval for the vl300-transmission?
What is the recommended service interval for the vl300-transmission?
Audi recommends servicing the vl300-transmission every 60,000 miles or 5 years, whichever comes first. This includes replacing the transmission fluid, filter, and gasket. Regular maintenance helps prevent premature wear and ensures optimal performance.
Q5 Can the vl300-transmission be rebuilt, or should it be replaced entirely?
Can the vl300-transmission be rebuilt, or should it be replaced entirely?
The vl300-transmission can be rebuilt if the damage is limited to internal components such as clutch packs, seals, or bearings. However, if the transmission housing or main shaft is damaged, a complete replacement may be more cost-effective. Always consult a certified Audi technician for an accurate assessment.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S6 Transmission Service Manual
Coming SoonOfficial service manual for the 1994-1997 Audi S6, including detailed procedures for servicing the vl300-transmission.
VAG-COM Diagnostic Tool Guide
Coming SoonStep-by-step guide on using the VAG-COM diagnostic tool to troubleshoot transmission issues in Audi vehicles.
Genuine Audi Transmission Fluid Specifications
Coming SoonDetailed specifications and purchasing information for Audi Genuine G 052 162 A2 transmission fluid.
Audi S6 Transmission Rebuild Kit
Coming SoonHigh-quality rebuild kit for the vl300-transmission, including clutch packs, seals, and gaskets.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.