Audi Audi S6 1994-1997

Audi Audi S6 1994-1997 Body Specifications

Detailed technical specifications and documentation for the body system of the 1994-1997 Audi S6, covering body panels, dimensions, materials, and structural components. Ideal for technicians and enthusiasts.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the body specifications for the 1994-1997 Audi S6, including key features, measurements, and technical details

How to Use

Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'weight'.

Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.

Key Specifications

Length

4790 mm (188.6 in)

Curb Weight

1560 kg (3439 lbs)

Drag Coefficient

0.32

Cargo Capacity

455 liters (16.1 cu ft)

Ground Clearance

120 mm (4.7 in)

Available Specifications

Exterior Dimensions

Detailed measurements and specifications for the exterior dimensions of the 1994-1997 Audi S6

Overall Dimensions

Length: 4790 mm (188.6 in)
Width: 1775 mm (69.9 in)
Height: 1420 mm (55.9 in)
Wheelbase: 2692 mm (106.0 in)
Track width (front/rear): 1486 mm / 1483 mm (58.5 in / 58.4 in)

Ground Clearance and Weight

Ground clearance: 120 mm (4.7 in)
Curb weight: 1560 kg (3439 lbs)
Gross vehicle weight: 2020 kg (4453 lbs)
Weight distribution (front/rear): 58% / 42%

Note: Ground clearance may vary slightly depending on tire size and suspension settings.

Body Materials and Construction

Information on the materials and construction techniques used in the body of the 1994-1997 Audi S6

Material Composition

Body structure: High-strength steel with galvanized coating
Hood and trunk lid: Aluminum alloy
Doors: Steel with reinforced side-impact beams
Roof: Steel with integrated sunroof option

Construction Features

Unibody construction for enhanced rigidity
Aerodynamic drag coefficient (Cd): 0.32
Integrated crumple zones for safety
Rust-proofing treatment applied to all body panels

Note: The aerodynamic drag coefficient contributes to improved fuel efficiency and reduced wind noise.

Interior Dimensions and Features

Detailed measurements and features of the interior space in the 1994-1997 Audi S6

Seating and Space

Headroom (front/rear): 980 mm / 950 mm (38.6 in / 37.4 in)
Legroom (front/rear): 1070 mm / 890 mm (42.1 in / 35.0 in)
Shoulder room (front/rear): 1420 mm / 1400 mm (55.9 in / 55.1 in)
Cargo capacity: 455 liters (16.1 cu ft)

Interior Materials

Seat upholstery: Leather or optional Alcantara
Dashboard and trim: Soft-touch materials with wood or aluminum accents
Carpeting: High-quality nylon with sound-deadening underlay
Headliner: Premium fabric with optional sunroof

Note: Interior materials may vary based on trim level and optional packages.

Safety and Structural Features

Key safety and structural features of the 1994-1997 Audi S6 body

Safety Features

Dual front airbags as standard
Side-impact protection beams in doors
Three-point seat belts for all seating positions
ABS (Anti-lock Braking System) as standard

Structural Integrity

Reinforced A-pillars and B-pillars for rollover protection
Energy-absorbing front and rear crumple zones
High-strength steel used in critical areas
Rigid passenger cell for crash protection

Note: The structural design meets or exceeds all safety standards for the time.

Search Specifications

Search by specification name, value, or description

Component Specifications

Dimensions

Overall Length: 4790 mm

Overall Width: 1775 mm

Overall Height: 1420 mm

Wheelbase: 2692 mm

Track Front: 1514 mm

Track Rear: 1492 mm

Ground Clearance: 120 mm

Weight

Curb Weight: 1560 kg

Gross Vehicle Weight: 2020 kg

Front Axle Load: 920 kg

Rear Axle Load: 1100 kg

Body Materials

Body Type: 4-door sedan

Construction: Unibody

Material: Galvanized steel

Corrosion Warranty: 12 years

Aerodynamics

Drag Coefficient: 0.32 Cd

Frontal Area: 2.2 m²

Lift Coefficient Front: 0.12

Lift Coefficient Rear: 0.08

Exterior Components

Headlights: Type: Halogen
Part Number: 4A0941001A
Wattage: 55W

Taillights: Type: LED
Part Number: 4A0945095B
Wattage: 21W

Mirrors: Type: Electrically adjustable
Part Number: 4A1857537A
Heating: Yes

interior Components

Seats: Material: Leather
Front Seat Adjustment: 8-way power
Rear Seat Adjustment: Manual
Part Number Front: 4A0881401A
Part Number Rear: 4A0881402A

Steering Wheel: Material: Leather-wrapped
Diameter: 370 mm
Adjustment: Tilt and telescopic
Part Number: 4A0419091A

Dashboard: Material: Soft-touch plastic
instrument Cluster: Analog
Part Number: 4A0857401A

Safety Features

Airbags: Front: Dual-stage
Side: Yes
Curtain: No
Part Number Front: 4A0959655A
Part Number Side: 4A0959656A

Seatbelts: Front: 3-point with pretensioners
Rear: 3-point
Part Number Front: 4A0857701A
Part Number Rear: 4A0857702A

Crumple Zones: Front: Yes
Rear: Yes
Material: High-strength steel

Glass

Windshield: Type: Laminated
Thickness: 5.5 mm
Part Number: 4A0845301A

Side Windows: Type: Tempered
Thickness: 4.0 mm
Part Number: 4A0845302A

Rear Window: Type: Tempered
Thickness: 4.0 mm
Part Number: 4A0845303A

Paint

Base Coat: Type: Acrylic urethane
Thickness: 35-45 microns

Clear Coat: Type: Polyurethane
Thickness: 40-50 microns

Warranty: 5 years

Maintenance

Body Wash interval: Every 2 weeks

Wax interval: Every 3 months

Rust Protection interval: Annually

Paint Care Products

Audi-approved car shampoo
Audi-approved wax
Audi-approved rust inhibitor

Service Information Service

Detailed service requirements and schedules for the body components

5000

Inspect exterior body for damage
Check and clean door seals
Lubricate hinges and locks

Ensure all body components are functioning correctly

15000

Inspect and clean underbody
Check for rust and apply protection if necessary
Inspect and clean sunroof drains

Pay special attention to areas prone to rust

30000

Inspect and replace worn weatherstripping
Check alignment of body panels
Inspect and repair paint chips

Ensure all body panels are properly aligned and sealed

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the body dimensions of the 1994-1997 Audi S6?

The 1994-1997 Audi S6 has a body length of 4792 mm, a width of 1775 mm, and a height of 1435 mm. The wheelbase measures 2692 mm, and the curb weight is approximately 1610 kg.

What type of body construction is used in the Audi S6?

The Audi S6 features a unibody construction, which integrates the body and chassis into a single structure. This design enhances rigidity, improves safety, and reduces weight.

What materials are used in the body of the Audi S6?

The body of the Audi S6 is primarily constructed from high-strength steel, with aluminum used for certain components such as the hood and doors to reduce weight and improve performance.

What is the drag coefficient of the Audi S6?

The Audi S6 has a drag coefficient (Cd) of 0.32, which contributes to its aerodynamic efficiency and improved fuel economy.

Are there any specific rust-prone areas on the Audi S6 body?

Common rust-prone areas on the Audi S6 include the wheel arches, lower door edges, and the undercarriage. Regular inspection and maintenance are recommended to prevent corrosion.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S6 Body Repair Manual

Coming Soon

Official repair manual for the 1994-1997 Audi S6 body, covering structural repairs, panel replacement, and corrosion prevention.

Audi S6 Body Dimensions and Specifications

Coming Soon

Detailed technical specifications for the Audi S6 body, including dimensions, materials, and construction details.

Audi S6 Rust Prevention Guide

Coming Soon

Comprehensive guide on preventing and treating rust on the Audi S6 body, including recommended products and techniques.

Audi S6 Aerodynamics Overview

Coming Soon

Technical overview of the aerodynamic design of the Audi S6, including drag coefficient and its impact on performance.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.