Audi Audi S5 2017-present

Audi Audi S5 2017-present Drivetrain Specifications

Detailed technical specifications and documentation for the 2017-Present Audi S5 drivetrain system, including engine, transmission, differential, and quattro all-wheel drive components.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the drivetrain specifications for the 2017-Present Audi S5, including key features, measurements, and technical details. This section covers the engine, transmission, differential, and all-wheel-drive system, providing detailed insights into the vehicle's performance and engineering.

How to Use

Use the search bar to locate specific drivetrain components or specifications by entering keywords such as 'engine torque', 'transmission type', or 'differential ratio'.

Navigate through the drivetrain documentation by clicking on the section titles in the table of contents. Each section is organized into subsections for easy access to detailed information.

Key Specifications

Engine Displacement

3.0L

Horsepower

349 hp

Torque

369 lb-ft

Transmission Type

8-speed Tiptronic

Weight Distribution

52% front, 48% rear

Available Specifications

Engine Specifications

Detailed information about the engine, including its type, displacement, power output, and torque.

Engine Type and Configuration

3.0L TFSI V6 engine
Turbocharged and direct-injected
DOHC (Dual Overhead Camshaft) design
90-degree cylinder bank angle

Power and Torque Output

349 horsepower @ 5,400-6,400 rpm
369 lb-ft of torque @ 1,370-4,500 rpm
Compression ratio: 11.2:1
Maximum engine speed: 6,800 rpm

Note: Power and torque figures are measured at the crankshaft under optimal conditions.

Transmission System

Details about the transmission, including its type, gear ratios, and operational characteristics.

Transmission Type

8-speed Tiptronic automatic transmission
Quattro all-wheel-drive system
Torque converter with lock-up clutch
Adaptive shift dynamics

Gear Ratios

1st gear: 4.71:1
2nd gear: 3.14:1
3rd gear: 2.11:1
4th gear: 1.67:1
5th gear: 1.29:1

Note: Gear ratios are optimized for both performance and fuel efficiency.

Differential and All-Wheel Drive

Information about the differential and the Quattro all-wheel-drive system, including torque distribution and operational features.

Differential Specifications

Sport rear differential with torque vectoring
40:60 front-to-rear torque split (default)
Up to 70% torque to the front or 85% to the rear
Electronically controlled multi-plate clutch

Quattro All-Wheel Drive

Standard on all Audi S5 models
Active torque distribution based on driving conditions
Enhanced traction and stability in all weather conditions
Integrated with Audi Drive Select system

Note: The Quattro system continuously monitors wheel slip and adjusts torque distribution accordingly.

Drivetrain Dimensions and Weight

Technical details about the drivetrain's physical dimensions and weight distribution.

Dimensions

Engine length: 520 mm
Engine width: 720 mm
Engine height: 630 mm
Transmission length: 650 mm

Weight Distribution

Front axle weight: 1,620 lbs
Rear axle weight: 1,480 lbs
Total drivetrain weight: 3,100 lbs
Weight distribution: 52% front, 48% rear

Note: Weight distribution contributes to balanced handling and performance.

Search Specifications

Search by specification name, value, or description

Component Specifications

Transmission

Type: 8-speed Tiptronic automatic

Gear Ratios: 1st: 4.714:1
2nd: 3.143:1
3rd: 2.106:1
4th: 1.667:1
5th: 1.285:1
6th: 1.000:1
7th: 0.839:1
8th: 0.667:1
Reverse: 3.317:1

Fluid Capacity: 9.3 liters

Fluid Type: Audi Genuine ATF

Part Number: G 055 005 A2

Operational Temperature Range: -40°C to 150°C

Torque Capacity: 500 Nm

Transfer Case

Type: Quattro all-wheel drive with self-locking center differential

Torque Split: 40:60 front to rear (default)

Dynamic Torque Vectoring: Yes

Fluid Capacity: 1.2 liters

Fluid Type: Audi Genuine Gear Oil

Part Number: G 052 145 S2

Operational Temperature Range: -40°C to 120°C

Rear Differential

Type: Sport differential with torque vectoring

Gear Ratio: 3.282:1

Fluid Capacity: 1.5 liters

Fluid Type: Audi Genuine Gear Oil

Part Number: G 052 145 S2

Operational Temperature Range: -40°C to 120°C

Torque Capacity: 600 Nm

Driveshafts

Material: High-strength steel

Diameter: 80 mm

Length: Front: 750 mm, Rear: 850 mm

Torque Capacity: 700 Nm

Operational Speed Limit: 6000 rpm

Axles

Front Axle: Type: Independent five-link suspension
Wheel Bearing Type: Sealed roller bearings
Part Number: 8W0 498 099
Torque Capacity: 500 Nm

Rear Axle: Type: Independent five-link suspension
Wheel Bearing Type: Sealed roller bearings
Part Number: 8W0 498 100
Torque Capacity: 600 Nm

Clutch

Type: Wet multi-plate clutch (for quattro system)

Number Of Plates: 6

Fluid Capacity: 1.0 liter

Fluid Type: Audi Genuine ATF

Part Number: G 055 005 A2

Operational Temperature Range: -40°C to 150°C

Propeller Shaft

Material: Carbon fiber reinforced polymer

Diameter: 90 mm

Length: 1200 mm

Torque Capacity: 800 Nm

Operational Speed Limit: 7000 rpm

Wheel Hubs

Front Hub: Type: Forged aluminum
Bolt Pattern: 5x112
Part Number: 8W0 407 615
Torque Capacity: 500 Nm

Rear Hub: Type: Forged aluminum
Bolt Pattern: 5x112
Part Number: 8W0 407 616
Torque Capacity: 600 Nm

Suspension

Front Suspension: Type: Five-link independent suspension
Spring Rate: 25 N/mm
Shock ABSorber Type: Adaptive air suspension
Part Number: 8W0 413 031

Rear Suspension: Type: Five-link independent suspension
Spring Rate: 28 N/mm
Shock ABSorber Type: Adaptive air suspension
Part Number: 8W0 413 032

Brakes

Front Brakes: Type: Ventilated discs
Diameter: 350 mm
Thickness: 34 mm
Pad Material: Ceramic
Part Number: 8W0 615 301

Rear Brakes: Type: Ventilated discs
Diameter: 330 mm
Thickness: 22 mm
Pad Material: Ceramic
Part Number: 8W0 615 302

Service Information Service

Detailed service requirements and schedules for the Audi S5 drivetrain

10000

Check transmission fluid level
Inspect driveshafts for wear
Check differential fluid level
Inspect suspension components

Use only Audi Genuine fluids and parts

30000

Replace transmission fluid
Replace differential fluid
Inspect and lubricate propeller shaft
Check wheel hub bearings

Perform torque checks on all drivetrain components

60000

Replace clutch fluid
Inspect and replace brake pads if necessary
Check and replace suspension bushings
Inspect and replace wheel bearings if necessary

Ensure all components are within manufacturer specifications

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of drivetrain does the 2017-Present Audi S5 use?

The 2017-Present Audi S5 utilizes a quattro all-wheel-drive (AWD) system. This system features a self-locking center differential with a default torque split of 40:60 (front:rear), which can dynamically adjust based on driving conditions to optimize traction and performance.

What is the transmission configuration in the Audi S5?

The Audi S5 is equipped with an 8-speed Tiptronic automatic transmission. This transmission is designed for smooth and efficient power delivery, with a torque capacity of up to 500 Nm (369 lb-ft). It also supports manual shifting via paddle shifters or the gear lever.

What is the maximum torque output of the Audi S5 drivetrain?

The 2017-Present Audi S5 drivetrain supports a maximum torque output of 500 Nm (369 lb-ft) at 1,370-4,500 rpm, delivered by the 3.0-liter TFSI V6 engine. This torque is efficiently distributed through the quattro AWD system for optimal performance.

How does the quattro AWD system enhance performance in the Audi S5?

The quattro AWD system in the Audi S5 enhances performance by providing superior traction, stability, and handling. It dynamically adjusts torque distribution between the front and rear axles, ensuring maximum grip during acceleration, cornering, and adverse weather conditions.

What are the recommended service intervals for the drivetrain components?

Audi recommends inspecting the drivetrain components, including the transmission and differential, every 40,000 miles or 4 years, whichever comes first. Regular fluid changes for the transmission and differential are critical to maintaining optimal performance and longevity.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S5 Drivetrain Technical Overview

Coming Soon

A detailed technical guide covering the quattro AWD system, transmission, and differential specifications for the 2017-Present Audi S5.

Quattro AWD System Maintenance Guide

Coming Soon

Step-by-step instructions for maintaining and servicing the quattro all-wheel-drive system, including fluid changes and inspections.

Audi S5 Transmission Fluid Replacement Procedure

Coming Soon

A comprehensive guide to replacing the transmission fluid in the 8-speed Tiptronic transmission, including torque specifications and safety precautions.

Drivetrain Warranty Information

Coming Soon

Official Audi warranty details for drivetrain components, including coverage terms and conditions for the 2017-Present S5.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.