Audi Audi S5 2017-present

Audi Audi S5 2017-present 3.0L Engine Specifications

Detailed technical specifications and documentation for the 3.0L TFSI V6 engine in the 2017-Present Audi S5. Includes performance data, system overviews, and maintenance guidelines.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the 3.0l-engine specifications for the 2017-Present Audi S5, including key features, measurements, and technical details

How to Use

Use the search function to locate specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Displacement

3.0 liters

Horsepower

349 hp @ 5400-6400 rpm

Torque

369 lb-ft @ 1370-4500 rpm

Compression Ratio

11.2:1

Fuel Economy

23 mpg (combined)

Available Specifications

Engine Performance

Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.

Power Output

Maximum horsepower: 349 hp @ 5400-6400 rpm
Peak torque: 369 lb-ft @ 1370-4500 rpm
Compression ratio: 11.2:1
Redline: 6500 rpm

Acceleration

0-60 mph: 4.4 seconds
Top speed: 155 mph (electronically limited)
Quarter-mile time: 12.9 seconds
Power-to-weight ratio: 8.6 lb/hp

Note: Performance figures may vary slightly depending on transmission type and driving conditions.

Engine Design

Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.

Engine Layout

V6 configuration with 90-degree bank angle
Dual overhead camshafts (DOHC)
Turbocharged and intercooled
Direct fuel injection system

Materials

Aluminum alloy block and cylinder heads
Forged steel crankshaft
High-strength connecting rods
Lightweight pistons with low-friction coatings

Note: The use of lightweight materials contributes to improved fuel efficiency and performance.

Fuel and Emissions

Information on fuel requirements, consumption, and emissions standards for the 3.0l-engine.

Fuel Specifications

Recommended fuel: Premium unleaded (91 octane or higher)
Fuel tank capacity: 15.3 gallons
Combined fuel economy: 23 mpg
Highway fuel economy: 30 mpg

Emissions

Complies with Euro 6 and EPA Tier 3 emissions standards
CO2 emissions: 213 g/km
Equipped with dual catalytic converters
Includes start-stop system for reduced emissions

Note: Emissions figures are based on standardized testing and may vary in real-world conditions.

Cooling and Lubrication

Details on the cooling and lubrication systems that ensure optimal engine performance and longevity.

Cooling System

Liquid-cooled with a high-capacity radiator
Electric water pump for improved efficiency
Thermostatically controlled cooling
Coolant capacity: 10.5 liters

Lubrication System

Wet sump oil system
Oil capacity: 7.0 liters
Recommended oil: SAE 5W-40 synthetic
Oil change interval: 10,000 miles or 12 months

Note: Regular oil changes are critical to maintaining engine performance and longevity.

Search Specifications

Search by specification name, value, or description

Engine Specifications

General Specifications

Engine Code: EA839

Engine Type: V6 TFSI

Displacement: 2995 cc

Configuration: 90-degree V6

Bore X Stroke: 84.5 mm x 89.0 mm

Compression Ratio: 11.2:1

Fuel System: Direct injection with MPI

Fuel Type: Premium unleaded (95 RON)

Emission Standard: Euro 6d-TEMP

Performance Specifications

Max Power: 349 hp @ 5400-6400 rpm

Max Torque: 369 lb-ft @ 1370-4500 rpm

Redline: 6800 rpm

Acceleration 0-60 Mph: 4.4 seconds

Top Speed: 155 mph (electronically limited)

Turbocharger Specifications

Type: Twin-scroll turbocharger

Boost Pressure: 1.2 bar

intercooler Type: Air-to-water

Turbo Lag: Minimal due to twin-scroll design

Part Number: 06L145702H

Cooling System

Coolant Capacity: 10.5 liters

Thermostat Opening Temperature: 87°C

Radiator Type: Aluminum cross-flow

Coolant Type: G12 EVO (pink)

Part Number Coolant: G 012 A8G M1

Lubrication System

Oil Capacity: 7.0 liters

Oil Type: VW 504 00 / 507 00

Oil Pressure: 3.5-4.5 bar @ 2000 rpm

Oil Filter Part Number: 06L115562B

Oil Change interval: 10000 miles or 12 months

Ignition System

Spark Plug Type: NGK PLFER7A8EG

Spark Plug Gap: 0.7-0.8 mm

Ignition Coil Part Number: 06E905115E

Ignition Timing: Adjustable via ECU

Spark Plug Torque: 22 Nm

Fuel System Specifications

Fuel Pump Pressure: 5.0 bar

injector Flow Rate: 14.5 cc/sec

Fuel Filter Part Number: 4M0201511A

High Pressure Fuel Pump Part Number: 06E127025K

Fuel Rail Pressure: 200 bar

Valvetrain Specifications

Valve Configuration: DOHC, 4 valves per cylinder

Valve Material: Hollow sodium-filled exhaust valves

Camshaft Type: Dual overhead camshafts

Valve Clearance: Hydraulic lifters (self-adjusting)

Timing Chain Tensioner Part Number: 06L109467B

Engine Management System

Ecu Type: Bosch MED17.1.1

Throttle Type: Electronic drive-by-wire

Sensor Types

Knock sensor
Crankshaft position sensor
Camshaft position sensor
Oxygen sensor (wideband)

Diagnostic interface: OBD-II

Software Version: 8W0906259H

Maintenance Specifications

Timing Chain Replacement Interval: Lifetime (inspect at 100,000 miles)

Spark Plug Replacement interval: 60000 miles

Serpentine Belt Replacement Interval: 90000 miles

Coolant Replacement interval: 5 years or 50000 miles

Air Filter Replacement interval: 40000 miles

Diagnostic Specifications

Compression Test Range: 12-14 bar

Leakdown Test Tolerance: Less than 10%

Idle Rpm: 700-800 rpm

Fuel Trim Range: -10% to +10%

Error Code Storage: Non-volatile memory

Service Information Service

Detailed service requirements and schedules for the 3.0L TFSI engine

10000

Oil and filter change
Inspect timing chain tensioner
Check coolant level and condition
Inspect serpentine belt for wear

Use only Audi-approved fluids and parts

40000

Replace air filter
Inspect spark plugs
Check fuel system for leaks
Inspect ignition coils

Replace spark plugs if necessary

60000

Replace spark plugs
Inspect timing chain and guides
Replace coolant
Inspect turbocharger for wear

Perform compression and leakdown tests if symptoms arise

Common Questions

Find answers to common questions about torque specifications

What is the horsepower and torque output of the 3.0L TFSI engine in the 2017-Present Audi S5?

The 3.0L TFSI V6 engine in the Audi S5 produces 349 horsepower at 5,400-6,400 rpm and 369 lb-ft of torque at 1,370-4,500 rpm. This engine features a twin-scroll turbocharger and direct fuel injection for optimal performance.

What type of fuel is recommended for the 3.0L TFSI engine?

Audi recommends using premium unleaded gasoline with an octane rating of 91 or higher for the 3.0L TFSI engine. Using lower-octane fuel may result in reduced performance and efficiency.

What is the oil capacity and recommended oil type for the 3.0L TFSI engine?

The 3.0L TFSI engine requires approximately 7.2 quarts (6.8 liters) of oil. Audi recommends using synthetic engine oil with a viscosity of 5W-40 that meets the VW 502 00 specification for optimal performance and longevity.

What is the service interval for the 3.0L TFSI engine?

Audi recommends an oil change and inspection service every 10,000 miles or 12 months, whichever comes first. Additional maintenance tasks, such as spark plug replacement, are recommended every 40,000 miles.

Does the 3.0L TFSI engine require any special cooling system maintenance?

The 3.0L TFSI engine uses a liquid cooling system with a mix of 50% coolant and 50% distilled water. Audi recommends checking the coolant level regularly and replacing the coolant every 5 years or 50,000 miles to prevent overheating and corrosion.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi 3.0L TFSI Engine Technical Specifications

Coming Soon

Detailed technical specifications for the 3.0L TFSI engine, including performance metrics, dimensions, and component details.

Audi S5 Maintenance Schedule

Coming Soon

Official maintenance schedule for the 2017-Present Audi S5, including service intervals and recommended procedures for the 3.0L TFSI engine.

Audi Genuine Parts Catalog

Coming Soon

Access the official catalog for genuine Audi parts, including components for the 3.0L TFSI engine, to ensure compatibility and warranty compliance.

Audi Warranty and Service Information

Coming Soon

Comprehensive guide to Audi's warranty coverage and service requirements for the 3.0L TFSI engine, including implications of using non-genuine parts.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.