Audi Audi S5 2007-2016

Audi Audi S5 2007-2016 Fuel System Specifications

Detailed technical specifications and documentation for the fuel system of the 2007-2016 Audi S5, including fuel type, injector details, pump performance, and emission compliance.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the fuel specifications for the 2007-2016 Audi S5, including key features, measurements, and technical details

How to Use

Use the search function to locate specific fuel specifications by entering keywords such as 'octane rating', 'fuel capacity', or 'emission standards'.

Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.

Key Specifications

Fuel Type

Premium unleaded (91+ octane)

Fuel Tank Capacity

16.9 gallons (64 liters)

Fuel Pressure

58 psi (4 bar)

CO2 Emissions

199 g/km

Fuel Efficiency

21 mpg city / 29 mpg highway

Available Specifications

Fuel Requirements

Detailed information on the type of fuel required for optimal performance and compliance with emission standards.

Recommended Fuel Type

Premium unleaded gasoline with an octane rating of 91 or higher
Minimum octane rating of 87 is acceptable but may reduce performance
Ethanol content should not exceed 10% (E10)
Avoid using diesel or alternative fuels not specified by Audi

Fuel Additives

Use of fuel additives is generally not required
If used, ensure additives are approved by Audi
Avoid additives containing metal compounds
Follow manufacturer guidelines for additive usage

Note: Using unapproved additives may void the warranty.

Fuel System Specifications

Technical details about the fuel system, including capacity, pressure, and component specifications.

Fuel Tank Capacity

Total fuel tank capacity: 16.9 gallons (64 liters)
Reserve fuel capacity: 2.1 gallons (8 liters)
Fuel tank material: High-density polyethylene
Fuel tank design: Dual-chamber for improved safety

Fuel Pump and Pressure

Fuel pump type: Electric in-tank pump
Fuel pressure: 58 psi (4 bar) at idle
Fuel delivery rate: 150 liters per hour
Fuel filter location: Integrated within the fuel pump module

Note: Fuel pressure may vary slightly under different operating conditions.

Emission Standards and Compliance

Information on emission standards, compliance, and environmental impact of the fuel system.

Emission Standards

Complies with Euro 5 emission standards
CO2 emissions: 199 g/km (combined cycle)
NOx emissions: 0.03 g/km
Particulate matter emissions: 0.005 g/km

Environmental Impact

Fuel efficiency: 21 mpg city / 29 mpg highway
Carbon footprint: 4.5 tons CO2 per year (average usage)
Recyclability of fuel system components: 95%
Use of eco-friendly materials in fuel system construction

Note: Regular maintenance is essential to maintain emission compliance.

Search Specifications

Search by specification name, value, or description

Component Specifications

Fuel Type

Recommended Fuel: Premium unleaded gasoline (91 AKI or 95 RON)

Minimum Octane Rating: 87 AKI (91 RON)

Ethanol Content: Up to 10% (E10)

Notes: Using fuel with lower octane may reduce performance and fuel efficiency

Fuel Tank

Capacity: 16.9 gallons (64 liters)

Material: High-density polyethylene (HDPE)

Part Number: 8K0201101A

Pressure Rating: 3.6 psi (25 kPa)

Notes: Includes integrated fuel pump and level sensor

Fuel Pump

Type: Electric in-tank fuel pump

Flow Rate: 150 liters per hour (LPH)

Operating Pressure: 58 psi (400 kPa)

Part Number: 8K0919051B

Voltage: 12V DC

Notes: Includes fuel filter and pressure regulator

Fuel injectors

Type: Direct injection (FSI)

Flow Rate: 200 cc/min at 3 bar

Operating Pressure: 1450 psi (100 bar)

Part Number: 06E906036C

Spray Pattern: Multi-hole

Notes: Designed for high-pressure fuel delivery

Fuel Filter

Type: In-line fuel filter

Filtration Rating: 10 microns

Replacement interval: Every 40,000 miles (64,000 km)

Part Number: 8K0201051A

Notes: Located in the fuel tank as part of the fuel pump module

Fuel Pressure Sensor

Type: Piezoresistive sensor

Operating Range: 0-1450 psi (0-100 bar)

Output Signal: 0.5-4.5V

Part Number: 06E906051K

Notes: Monitors high-pressure fuel rail pressure

Fuel Rail

Material: Stainless steel

Pressure Rating: 2175 psi (150 bar)

Part Number: 06E133755B

Notes: Includes integrated pressure sensor and injector ports

Fuel System Maintenance

injector Cleaning Interval: Every 30,000 miles (48,000 km)

Fuel System Flush interval: Every 60,000 miles (96,000 km)

Recommended Additives

Audi fuel system cleaner (part number: G001770M3)

Notes: Use only Audi-approved additives to avoid system damage

Fuel System Diagnostics

Diagnostic Tool: VAS 5051B or equivalent

Error Codes

P0171
P0172
P0087
P0088

Pressure Test interval: Every 20,000 miles (32,000 km)

Notes: Check for leaks, pressure drops, and injector performance

Safety information

Fire Hazard: Highly flammable

Pressure Warning: Do not open fuel system under pressure

Ventilation Requirements: Work in well-ventilated areas

Notes: Follow Audi workshop manual procedures for fuel system repairs

Service Information Service

Detailed service requirements and schedules for the fuel system

10,000 miles

12 months

Inspect fuel lines and connections for leaks
Check fuel pressure sensor readings
Verify fuel pump operation

Use Audi-approved diagnostic tools

30,000 miles

36 months

Clean fuel injectors
Replace fuel filter if necessary
Inspect fuel tank for damage

Follow Audi-recommended cleaning procedures

60,000 miles

72 months

Perform fuel system flush
Replace fuel pump if necessary
Check fuel rail pressure

Use only Audi-approved replacement parts

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of fuel is recommended for the 2007-2016 Audi S5?

The 2007-2016 Audi S5 requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower octane fuel may result in reduced performance and engine knocking.

Can I use ethanol-blended fuel in my Audi S5?

Yes, the Audi S5 can use ethanol-blended fuels containing up to 10% ethanol (E10). However, fuels with higher ethanol content (e.g., E15 or E85) are not recommended as they can damage the fuel system and void the warranty.

What is the fuel tank capacity of the Audi S5?

The fuel tank capacity for the 2007-2016 Audi S5 is 16.9 gallons (64 liters). This provides an estimated range of approximately 400-500 miles depending on driving conditions and engine type.

What happens if I use diesel or the wrong fuel type?

Using diesel or an incorrect fuel type in the Audi S5 can cause severe engine damage, fuel system contamination, and void the warranty. If this occurs, do not start the engine and contact an Audi service center immediately for fuel system flushing.

Does the Audi S5 have a fuel filter that needs regular replacement?

Yes, the Audi S5 is equipped with a fuel filter that should be inspected and replaced every 40,000 miles or as specified in the owner's manual. A clogged fuel filter can reduce fuel efficiency and engine performance.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S5 Owner's Manual

Coming Soon

The official owner's manual for the 2007-2016 Audi S5, containing detailed fuel specifications, maintenance schedules, and safety information.

Audi Fuel System Maintenance Guide

Coming Soon

A comprehensive guide on maintaining the fuel system of your Audi S5, including fuel filter replacement and fuel injector cleaning procedures.

Audi Warranty and Fuel System Coverage

Coming Soon

Information on Audi's warranty policies, including coverage for fuel system components and implications of using non-recommended fuels.

Audi Technical Service Bulletins (TSBs)

Coming Soon

Access to technical service bulletins related to the fuel system and engine performance for the 2007-2016 Audi S5.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.