Audi Audi S5 2007-2016 4.2L Engine Specifications
Detailed technical specifications and documentation for the 4.2L V8 FSI engine in the 2007-2016 Audi S5. Includes performance data, system overviews, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 4.2l-engine specifications for the 2007-2016 Audi S5, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 4.2l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
4163 cc (4.2 liters)
Power Output
349 hp (260 kW) at 6800 rpm
Torque
325 lb-ft (440 Nm) at 3500 rpm
Compression Ratio
12.5:1
Fuel Consumption
17 mpg (combined)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 4.2l-engine, including power output, torque, and acceleration metrics.
Engine Performance
Detailed information on the performance characteristics of the 4.2l-engine, including power output, torque, and acceleration metrics.
Power and Torque
- Maximum power output: 349 hp (260 kW) at 6800 rpm
- Peak torque: 325 lb-ft (440 Nm) at 3500 rpm
- Redline: 7200 rpm
- Compression ratio: 12.5:1
- Fuel delivery: Direct injection
Acceleration and Top Speed
- 0-60 mph acceleration: 4.9 seconds
- Top speed: 155 mph (electronically limited)
- Quarter-mile time: 13.2 seconds
- Power-to-weight ratio: 9.2 lb/hp
Note: Performance figures may vary slightly depending on transmission type and driving conditions.
Engine Design
Technical details about the 4.2l-engine's design, including its architecture, materials, and key components.
Engine Design
Technical details about the 4.2l-engine's design, including its architecture, materials, and key components.
Engine Architecture
- Configuration: V8, 90-degree bank angle
- Displacement: 4163 cc (4.2 liters)
- Bore x Stroke: 84.5 mm x 92.8 mm
- Cylinder block material: Aluminum alloy
- Cylinder head material: Aluminum alloy
Valvetrain and Timing
- Valvetrain: DOHC, 4 valves per cylinder
- Camshaft drive: Chain-driven
- Variable valve timing: Audi AVS (Audi Valvelift System)
- Intake valve diameter: 37.0 mm
- Exhaust valve diameter: 31.0 mm
Note: The Audi Valvelift System optimizes valve lift for improved performance and efficiency.
Fuel and Emissions
Information on the 4.2l-engine's fuel system, efficiency, and emissions compliance.
Fuel and Emissions
Information on the 4.2l-engine's fuel system, efficiency, and emissions compliance.
Fuel System
- Fuel type: Premium unleaded (91 octane or higher)
- Fuel tank capacity: 16.9 gallons (64 liters)
- Fuel consumption (city): 14 mpg
- Fuel consumption (highway): 22 mpg
- Fuel consumption (combined): 17 mpg
Emissions and Compliance
- Emissions standard: Euro 5 and ULEV II compliant
- Catalytic converter: Two-stage, close-coupled
- Exhaust system: Dual exhaust with active sound tuning
- CO2 emissions: 299 g/km
Note: Emissions figures are based on standardized testing and may vary in real-world conditions.
Cooling and Lubrication
Details about the 4.2l-engine's cooling and lubrication systems, including fluid capacities and maintenance intervals.
Cooling and Lubrication
Details about the 4.2l-engine's cooling and lubrication systems, including fluid capacities and maintenance intervals.
Cooling System
- Coolant capacity: 12.7 liters (13.4 quarts)
- Radiator type: Aluminum cross-flow
- Thermostat opening temperature: 87°C (189°F)
- Coolant type: G12++ or equivalent
Lubrication System
- Oil capacity: 8.5 liters (9.0 quarts)
- Oil type: SAE 5W-40 synthetic
- Oil change interval: 10,000 miles or 12 months
- Oil filter type: Cartridge-style, replaceable element
Note: Always use Audi-approved fluids and filters to maintain warranty and performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Type
- V8 FSI
- Displacement
- 4.2 liters
- Configuration
- 90-degree V8
- Bore
- 84.5 mm
- Stroke
- 92.8 mm
- Compression Ratio
- 12.5:1
- Engine Code
- BHK, BNS, CAUA
Performance
- Max Power
- 349 hp @ 6800 rpm
- Max Torque
- 325 lb-ft @ 3500 rpm
- Redline
- 7200 rpm
- Fuel System
- Direct Fuel Injection (FSI)
- Fuel Type
- Premium Unleaded (91+ octane)
Dimensions And Weight
- Engine Weight
- 220 kg (485 lbs)
- Length
- 520 mm
- Width
- 720 mm
- Height
- 640 mm
- Oil Capacity
- 9.5 liters (10 quarts)
Cooling System
- Coolant Capacity
- 12 liters
- Thermostat Opening Temperature
- 87°C (189°F)
- Radiator Type
- Aluminum cross-flow
- Coolant Type
- G12++ or G13
- Cooling Fan Type
- Electric
Lubrication System
- Oil Pump Type
- Gear-driven
- Oil Pressure
- 3.5-4.5 bar at 2000 rpm
- Oil Filter Part Number
- 06E115561B
- Recommended Oil
- VW 502 00 / 504 00
- Oil Change interval
- 10,000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK PFR7S8EG
- Spark Plug Gap
- 0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
- Firing Order
- 1-5-4-8-6-3-7-2
Fuel System
- Fuel Pump Pressure
- 5.0 bar
- injector Part Number
- 06E906036C
- Fuel Rail Pressure
- 40-120 bar
- High-Pressure Pump Part Number
- 06E127025K
- Fuel Filter Part Number
- 8K0201511A
Emissions
- Emission Standard
- EURO 5 / LEV II
- Catalytic Converter Part Number
- 8K0254105A
- Oxygen Sensor Part Number
- 06A906262L
- EGR System
- None (Direct Injection)
- Evaporative Emissions System
- Sealed system with charcoal canister
Timing System
- Timing Chain Type
- Dual-row roller chain
- Chain Tensioner Part Number
- 06E109467B
- Camshaft Adjustment
- Continuous variable on intake and exhaust
- Timing Chain Replacement Interval
- Inspect every 60,000 miles
- Camshaft Position Sensor Part Number
- 06E907689C
Maintenance
- Valve Clearance
- Hydraulic lifters (no adjustment required)
- Belt Drive System
- Serpentine belt with automatic tensioner
- Serpentine Belt Part Number
- 06E903137E
- Belt Replacement interval
- Every 60,000 miles
- Air Filter Part Number
- 8K0129620
- Air Filter Replacement interval
- Every 20,000 miles
Diagnostics
- OBDII Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0300
- P0171
- P0420
- Diagnostic Tool
- VCDS (VAG-COM)
- Sensor References
- Crankshaft Position Sensor: 06E906433CKnock Sensor: 06E905161AThrottle Position Sensor: 06E907385A
Service Information Service
Detailed service requirements and schedules for the 4.2L V8 FSI engine
- Oil and filter change
- Inspect timing chain tension
- Check coolant level and condition
- Inspect serpentine belt for wear
Use only VW 502 00 / 504 00 certified oil
- Replace air filter
- Inspect spark plugs
- Check fuel system for leaks
- Inspect exhaust system
Replace spark plugs if wear is detected
- Replace serpentine belt
- Inspect timing chain and guides
- Replace coolant
- Inspect ignition coils
Timing chain replacement may be required if excessive wear is detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 4.2L V8 engine in the 2007-2016 Audi S5?
What is the horsepower and torque output of the 4.2L V8 engine in the 2007-2016 Audi S5?
The 4.2L V8 FSI engine in the 2007-2016 Audi S5 produces 354 horsepower at 7,000 rpm and 325 lb-ft of torque at 3,500 rpm. This engine features a direct fuel injection system and a high compression ratio of 12.5:1 for optimal performance.
Q2 What is the recommended oil type and capacity for the 4.2L V8 engine?
What is the recommended oil type and capacity for the 4.2L V8 engine?
The 4.2L V8 engine requires fully synthetic oil meeting Audi specification VW 502 00. The oil capacity is approximately 9.7 liters (10.2 quarts) with a filter change. Always use an OEM oil filter to ensure proper fit and performance.
Q3 What is the service interval for the timing chain on the 4.2L V8 engine?
What is the service interval for the timing chain on the 4.2L V8 engine?
The timing chain on the 4.2L V8 engine is designed to last the lifetime of the engine under normal operating conditions. However, it is recommended to inspect the timing chain and tensioners every 100,000 miles or if symptoms like rattling noises or timing-related issues arise.
Q4 What is the firing order for the 4.2L V8 engine?
What is the firing order for the 4.2L V8 engine?
The firing order for the 4.2L V8 engine is 1-5-4-8-6-3-7-2. This sequence ensures smooth engine operation and optimal power delivery.
Q5 What is the recommended spark plug gap for the 4.2L V8 engine?
What is the recommended spark plug gap for the 4.2L V8 engine?
The recommended spark plug gap for the 4.2L V8 engine is 0.028 inches (0.7 mm). Use only Audi-approved spark plugs, such as NGK PFR7S8EG, to maintain engine performance and reliability.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 4.2L V8 Engine Technical Specifications
Coming SoonDetailed technical specifications for the 4.2L V8 engine, including performance metrics, dimensions, and component details.
Audi S5 4.2L V8 Maintenance Schedule
Coming SoonComprehensive maintenance schedule for the 4.2L V8 engine, including oil change intervals, timing chain inspection, and other service requirements.
Audi Genuine Parts Catalog for 4.2L V8 Engine
Coming SoonOfficial catalog of genuine Audi parts for the 4.2L V8 engine, including filters, gaskets, and timing components.
Audi S5 4.2L V8 Engine Repair Manual
Coming SoonStep-by-step repair and service procedures for the 4.2L V8 engine, including torque specifications and safety precautions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.