Audi Audi S4 2016-present DL501 Transmission Specifications
Detailed technical specifications and documentation for the DL501 dual-clutch transmission used in the 2016-Present Audi S4. This document covers transmission design, torque capacity, gear ratios, fluid requirements, and maintenance procedures specific to the S4 model.
Overview Specifications
Comprehensive description of the dl501-transmission specifications for the 2016-Present Audi S4, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dl501-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections. Each section is labeled with a title and contains subsections for detailed information.
Key Specifications
Transmission Type
7-speed DSG
Torque Capacity
600 Nm
Fluid Capacity
7.2 liters
Shift Time
< 200 ms
Gear Ratios
3.46:1 to 0.52:1
Available Specifications
Transmission Design and Architecture
Details about the design, construction, and architecture of the dl501-transmission used in the 2016-Present Audi S4
Transmission Design and Architecture
Details about the design, construction, and architecture of the dl501-transmission used in the 2016-Present Audi S4
Dual-Clutch System
- 7-speed dual-clutch transmission (DSG)
- Wet clutch system with hydraulic actuation
- Clutch diameter: 240 mm
- Designed for high torque handling up to 600 Nm
Gear Ratios
- 1st gear ratio: 3.46:1
- 2nd gear ratio: 2.15:1
- 3rd gear ratio: 1.46:1
- 4th gear ratio: 1.07:1
- 5th gear ratio: 0.84:1
- 6th gear ratio: 0.66:1
- 7th gear ratio: 0.52:1
- Reverse gear ratio: 3.40:1
Note: Gear ratios optimized for performance and fuel efficiency
Performance Specifications
Technical details about the performance capabilities of the dl501-transmission
Performance Specifications
Technical details about the performance capabilities of the dl501-transmission
Torque Capacity
- Maximum torque capacity: 600 Nm
- Continuous torque rating: 550 Nm
- Designed for high-performance applications
Shift Times
- Shift time in milliseconds: < 200 ms
- Adaptive shift logic for dynamic driving conditions
- Supports launch control functionality
Note: Shift times measured under optimal conditions
Maintenance and Fluid Specifications
Information about maintenance requirements and fluid specifications for the dl501-transmission
Maintenance and Fluid Specifications
Information about maintenance requirements and fluid specifications for the dl501-transmission
Transmission Fluid
- Recommended fluid: Audi Genuine DSG Fluid
- Fluid capacity: 7.2 liters
- Fluid change interval: 60,000 miles or 5 years
Service Requirements
- Regular inspection of clutch wear
- Software updates via Audi diagnostic tools
- Filter replacement during fluid changes
Note: Follow Audi's recommended service schedule for optimal performance
Integration with Audi Drive Select
Details about how the dl501-transmission integrates with Audi Drive Select for enhanced driving dynamics
Integration with Audi Drive Select
Details about how the dl501-transmission integrates with Audi Drive Select for enhanced driving dynamics
Drive Modes
- Supports Comfort, Dynamic, Auto, and Individual modes
- Adaptive shift mapping based on selected mode
- Customizable throttle and shift response
Performance Enhancements
- Dynamic mode prioritizes sporty shifting
- Comfort mode optimizes for smoothness and fuel efficiency
- Integration with quattro all-wheel drive system
Note: Drive modes can be adjusted via the Audi MMI system
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 7-speed dual-clutch automatic
- Manufacturer
- Audi AG
- Part Number
- 0B5 300 046
- Model Years
- 2016-Present
- Applications
-
- Audi S4
- Audi S5
- Audi SQ5
Dimensions And Weight
- Length
- 720 mm
- Width
- 580 mm
- Height
- 420 mm
- Weight
- 95 kg
- Fluid Capacity
- 7.2 liters
Performance Specifications
- Maximum Torque
- 550 Nm
- Maximum Power
- 354 hp
- Gear Ratios
- 1st Gear: 3.50:12nd Gear: 2.04:13rd Gear: 1.32:14th Gear: 1.00:15th Gear: 0.81:16th Gear: 0.68:17th Gear: 0.56:1Reverse Gear: 3.89:1
- Shift Times
- 200 ms
Fluid Specifications
- Fluid Type
- Audi Genuine Dual Clutch Transmission Fluid
- Part Number
- G 052 529 A2
- Viscosity
- 75W-90
- Operating Temperature Range
- -40°C to 150°C
- Fluid Change interval
- 60,000 miles or 5 years
Operational Parameters
- Maximum input Speed
- 8,000 rpm
- Maximum Output Speed
- 7,500 rpm
- Temperature Warning Threshold
- 120°C
- Temperature Shutdown Threshold
- 140°C
- Pressure Range
- 10-20 bar
Clutch Specifications
- Clutch Type
- Dual wet multi-plate clutch
- Clutch Pack Diameter
- 220 mm
- Clutch Plate Thickness
- 1.5 mm
- Clutch Engagement Pressure
- 12-18 bar
- Clutch Wear Limit
- 0.5 mm
Electronic Control
- Control Module
- Mechatronic Unit
- Part Number
- 0B5 927 156
- Sensors
-
- Input Speed Sensor
- Output Speed Sensor
- Temperature Sensor
- Pressure Sensor
- Communication Protocol
- CAN Bus
- Software Version
- 8K0 927 156 B
Maintenance Specifications
- Filter Replacement interval
- 60,000 miles or 5 years
- Filter Part Number
- 0B5 325 429
- Seal Replacement interval
- 120,000 miles or 10 years
- Seal Part Number
- 0B5 321 115
- Torque Specifications
- Pan Bolts: 10 NmFilter Bolts: 8 NmDrain Plug: 30 Nm
Diagnostic Specifications
- Diagnostic Tool
- VAS 6154
- Fault Codes
-
- P0700
- P0715
- P0720
- P0730
- P0741
- Diagnostic Procedures
-
- Check for fault codes
- Inspect fluid level and condition
- Test clutch engagement pressure
- Verify sensor readings
- Diagnostic interval
- Every 30,000 miles or 2 years
Safety information
- Warning
- Do not operate the transmission without proper fluid levels
- Caution
- Ensure the transmission is at operating temperature before performing diagnostics
- Note
- Use only Audi Genuine fluids and parts for maintenance
Service Information Service
Detailed service requirements and schedules for the DL501 transmission
- Inspect transmission fluid level
- Check for leaks
- Perform diagnostic scan
Ensure all connections are secure and free of debris
- Replace transmission fluid
- Replace transmission filter
- Inspect clutch pack
Use only Audi Genuine transmission fluid
- Replace seals
- Inspect mechatronic unit
- Perform full diagnostic check
Consider replacing the mechatronic unit if faults are detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DL501 transmission in the 2016-Present Audi S4?
What is the torque capacity of the DL501 transmission in the 2016-Present Audi S4?
The DL501 transmission, also known as the S-Tronic 7-speed dual-clutch transmission, has a torque capacity of up to 600 Nm (442 lb-ft). This makes it suitable for high-performance applications like the Audi S4.
Q2 What type of fluid is recommended for the DL501 transmission?
What type of fluid is recommended for the DL501 transmission?
Audi recommends using genuine Audi dual-clutch transmission fluid (part number G 055 529 A2) for the DL501 transmission. The fluid capacity is approximately 7.2 liters (7.6 quarts), but always refer to the service manual for precise refill specifications.
Q3 How often should the DL501 transmission fluid be changed?
How often should the DL501 transmission fluid be changed?
Audi does not specify a fixed interval for transmission fluid changes under normal operating conditions. However, for vehicles subjected to severe driving conditions (e.g., frequent towing, high-performance use), it is recommended to inspect and potentially replace the fluid every 60,000 miles (96,000 km).
Q4 What is the gear ratio configuration of the DL501 transmission?
What is the gear ratio configuration of the DL501 transmission?
The DL501 transmission features a 7-speed configuration with the following gear ratios: 1st gear - 3.76:1, 2nd gear - 2.27:1, 3rd gear - 1.51:1, 4th gear - 1.13:1, 5th gear - 0.89:1, 6th gear - 0.73:1, 7th gear - 0.62:1. The final drive ratio is 3.68:1.
Q5 Can the DL501 transmission be repaired or rebuilt?
Can the DL501 transmission be repaired or rebuilt?
Yes, the DL501 transmission can be repaired or rebuilt by qualified technicians using genuine Audi parts. However, due to the complexity of the dual-clutch system and electronic controls, it is highly recommended to have repairs performed by an authorized Audi service center to ensure proper functionality and warranty compliance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DL501 Transmission Service Manual
Coming SoonOfficial service manual for the DL501 transmission, including detailed repair procedures, torque specifications, and diagnostic information.
Audi S4 Owner's Manual
Coming SoonComprehensive guide for Audi S4 owners, including maintenance schedules, fluid specifications, and transmission care tips.
DL501 Transmission Fluid Replacement Guide
Coming SoonStep-by-step instructions for replacing the transmission fluid in the DL501 transmission, including safety precautions and tool requirements.
Audi Technical Service Bulletins (TSBs)
Coming SoonAccess to official TSBs related to the DL501 transmission, including updates, recalls, and common issues.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.