Audi Audi S4 2016-present Body Specifications
Detailed technical specifications and documentation for the body system of the 2016-Present Audi S4, including structural design, materials, dimensions, and advanced features.
Overview Specifications
Comprehensive description of the body specifications for the 2016-Present Audi S4, including key features, measurements, and technical details
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4749 mm (187.0 in)
Curb Weight
1665 kg (3671 lbs)
Drag Coefficient
0.30
Trunk Volume
480 liters (16.9 cu ft)
Torsional Rigidity
25,000 Nm/degree
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the Audi S4's exterior dimensions, including length, width, height, and wheelbase.
Exterior Dimensions
Detailed measurements and specifications of the Audi S4's exterior dimensions, including length, width, height, and wheelbase.
Overall Dimensions
- Length: 4749 mm (187.0 in)
- Width: 1842 mm (72.5 in)
- Height: 1408 mm (55.4 in)
- Wheelbase: 2826 mm (111.3 in)
- Track width (front/rear): 1572 mm / 1552 mm (61.9 in / 61.1 in)
Ground Clearance and Weight
- Ground clearance: 120 mm (4.7 in)
- Curb weight: 1665 kg (3671 lbs)
- Gross vehicle weight: 2130 kg (4696 lbs)
- Weight distribution (front/rear): 55% / 45%
Note: Weight distribution is optimized for balanced handling.
Body Materials and Construction
Information on the materials used in the Audi S4's body construction, including the use of lightweight materials and structural design.
Body Materials and Construction
Information on the materials used in the Audi S4's body construction, including the use of lightweight materials and structural design.
Material Composition
- Aluminum usage: 20% of body structure
- High-strength steel: 60% of body structure
- Magnesium and composite materials: 20%
- Audi Space Frame (ASF) technology for rigidity
Structural Design
- Torsional rigidity: 25,000 Nm/degree
- Drag coefficient (Cd): 0.30
- Aerodynamic lift reduction: 30% compared to previous models
- Integrated crash management system
Note: The drag coefficient contributes to improved fuel efficiency and reduced wind noise.
Exterior Features
Key exterior features of the Audi S4, including lighting, aerodynamics, and design elements.
Exterior Features
Key exterior features of the Audi S4, including lighting, aerodynamics, and design elements.
Lighting System
- Full LED headlights with dynamic turn signals
- LED taillights with dynamic indicators
- Adaptive light system with cornering function
- Automatic high-beam control
Aerodynamic Enhancements
- Active air intake shutters
- Rear spoiler with integrated brake light
- Underbody paneling for improved airflow
- Aero-optimized side mirrors
Note: Active air intake shutters close at higher speeds to reduce drag.
Interior Dimensions
Detailed measurements and specifications of the Audi S4's interior dimensions, including seating and cargo space.
Interior Dimensions
Detailed measurements and specifications of the Audi S4's interior dimensions, including seating and cargo space.
Seating and Legroom
- Front headroom: 1010 mm (39.8 in)
- Rear headroom: 960 mm (37.8 in)
- Front legroom: 1050 mm (41.3 in)
- Rear legroom: 890 mm (35.0 in)
Cargo Capacity
- Trunk volume: 480 liters (16.9 cu ft)
- Maximum cargo capacity (rear seats folded): 965 liters (34.1 cu ft)
- Load width between wheel arches: 1000 mm (39.4 in)
- Load height: 500 mm (19.7 in)
Note: Cargo capacity is measured to the roof lining.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4702 mm
- Overall Width
- 1842 mm
- Overall Height
- 1367 mm
- Wheelbase
- 2826 mm
- Track Width Front
- 1575 mm
- Track Width Rear
- 1557 mm
- Ground Clearance
- 118 mm
Weight
- Curb Weight
- 1665 kg
- Gross Vehicle Weight
- 2130 kg
- Payload Capacity
- 465 kg
- Front Axle Load
- 930 kg
- Rear Axle Load
- 1200 kg
Body Materials
- Material Type
-
- Aluminum
- High-strength steel
- Body Structure
- Hybrid construction with aluminum hood, doors, and trunk lid
- Corrosion Protection
- Galvanized steel with 12-year anti-corrosion warranty
Aerodynamics
- Drag Coefficient
- 0.30 Cd
- Frontal Area
- 2.21 m²
- Air Resistance
- 0.66 m²
Doors
- Number Of Doors
- 4
- Door Type
- Frameless windows
- Door Material
- Aluminum
- Door Hinge Type
- Heavy-duty ball-bearing hinges
- Door Opening Angle
- 70 degrees
Windows
- Front Windshield Thickness
- 5.5 mm
- Side Window Thickness
- 4.0 mm
- Rear Window Thickness
- 5.0 mm
- Window Material
- Laminated safety glass
- Window Tinting
- UV-protective tinting
Roof
- Roof Type
- Fixed steel roof with optional panoramic sunroof
- Roof Material
- Steel with sound-deadening layer
- Roof Load Capacity
- 100 kg
- Sunroof Dimensions
- 800 mm x 700 mm
Trunk
- Trunk Capacity
- 480 liters
- Trunk Opening Width
- 1050 mm
- Trunk Opening Height
- 500 mm
- Trunk Floor Material
- Carpeted with removable load liner
- Trunk Hinge Type
- Gas struts
Lighting
- Headlight Type
- LED matrix headlights
- Headlight Output
- 1200 lumens
- Taillight Type
- LED dynamic turn signals
- Fog Light Type
- LED fog lights
- Adaptive Lighting
- Yes, with cornering function
Safety Features
- Airbags
-
- Front airbags
- Side airbags
- Curtain airbags
- Crumple Zones
-
- Front
- Rear
- Safety Cell
- High-strength steel safety cell
- Pedestrian Protection
- Active hood system
- Crash Test Rating
- 5-star Euro NCAP
Service Information Service
Detailed service requirements and schedules for the Audi S4 body components
- Inspect body panels for damage
- Check door hinges and latches
- Lubricate door seals
- Inspect windshield wipers and washer system
Ensure all body components are free from corrosion and damage
- Inspect and clean sunroof drainage system
- Check and adjust trunk latch
- Inspect and lubricate door locks
- Check alignment of body panels
Verify proper operation of all body-related systems
- Inspect and replace worn door seals
- Check and replace windshield if necessary
- Inspect and repair any body corrosion
- Verify proper operation of all lighting systems
Perform thorough inspection of all body components and systems
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2016-Present Audi S4?
What are the exterior dimensions of the 2016-Present Audi S4?
The 2016-Present Audi S4 has an overall length of 187.5 inches, a width of 72.7 inches (excluding mirrors), and a height of 55.1 inches. The wheelbase measures 111.0 inches, and the track width is 61.9 inches (front) and 61.5 inches (rear).
Q2 What materials are used in the construction of the Audi S4 body?
What materials are used in the construction of the Audi S4 body?
The Audi S4 body utilizes a combination of high-strength steel, aluminum, and composite materials. The hood and front fenders are made of aluminum to reduce weight, while the roof and trunk lid incorporate lightweight composite materials for improved performance and fuel efficiency.
Q3 What is the drag coefficient of the Audi S4?
What is the drag coefficient of the Audi S4?
The Audi S4 has a drag coefficient (Cd) of 0.30, which is achieved through aerodynamic optimization, including a flat underbody, active grille shutters, and strategically placed air ducts.
Q4 What is the curb weight of the Audi S4?
What is the curb weight of the Audi S4?
The curb weight of the Audi S4 varies by trim and options but typically ranges from 3,792 lbs (1,720 kg) to 3,902 lbs (1,770 kg). The lightweight construction contributes to its dynamic handling and performance.
Q5 Does the Audi S4 feature any advanced body technologies?
Does the Audi S4 feature any advanced body technologies?
Yes, the Audi S4 includes advanced body technologies such as Audi Space Frame (ASF) construction, which combines lightweight materials with high rigidity for improved safety and performance. It also features acoustic glass for reduced cabin noise and enhanced comfort.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S4 Body Repair Manual
Coming SoonOfficial repair manual for the Audi S4 body, covering structural components, panel replacement, and alignment procedures.
Audi S4 Aerodynamics Guide
Coming SoonDetailed guide on the aerodynamic design of the Audi S4, including airflow management and drag reduction techniques.
Audi S4 Body Material Specifications
Coming SoonTechnical document outlining the materials used in the Audi S4 body construction, including steel, aluminum, and composites.
Audi S4 Paint and Finish Care Guide
Coming SoonComprehensive guide on maintaining the exterior finish of the Audi S4, including paint care, corrosion prevention, and detailing tips.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.