Audi Audi S4 2016-present 3.0L Engine Specifications
Detailed technical specifications and performance data for the 3.0L TFSI V6 engine in the 2016-Present Audi S4. Includes horsepower, torque, turbocharging, and maintenance information.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2016-Present Audi S4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
3.0 liters (2995 cc)
Horsepower
349 hp (260 kW)
Torque
369 lb-ft (500 Nm)
Compression Ratio
11.2:1
Fuel Economy
22 mpg (10.7 L/100 km)
Available Specifications
Engine Design and Architecture
Detailed information on the design, architecture, and key components of the 3.0l-engine
Engine Design and Architecture
Detailed information on the design, architecture, and key components of the 3.0l-engine
Engine Type and Configuration
- 3.0-liter V6 TFSI engine
- 90-degree cylinder bank angle
- Aluminum alloy block and cylinder heads
- Dual overhead camshafts (DOHC) with variable valve timing
- Direct fuel injection system
Turbocharging System
- Single twin-scroll turbocharger
- Maximum boost pressure of 1.2 bar (17.4 psi)
- Intercooler integrated into the intake manifold
- Turbocharger response time of 0.8 seconds at 2000 RPM
- Note: Turbocharger is water-cooled for improved durability
Note: The twin-scroll design minimizes turbo lag and improves low-end torque.
Performance Specifications
Detailed performance metrics and specifications for the 3.0l-engine
Performance Specifications
Detailed performance metrics and specifications for the 3.0l-engine
Power and Torque Output
- Maximum power output: 349 hp (260 kW) at 5400-6400 RPM
- Peak torque: 369 lb-ft (500 Nm) at 1370-4500 RPM
- Redline: 7000 RPM
- Compression ratio: 11.2:1
- Note: Power and torque figures are measured at the crankshaft
Fuel Efficiency and Emissions
- Combined fuel economy: 22 mpg (10.7 L/100 km)
- CO2 emissions: 199 g/km
- Euro 6 compliant emissions standard
- Start-stop system for improved fuel efficiency
- Note: Fuel economy may vary based on driving conditions
Cooling and Lubrication Systems
Technical details on the cooling and lubrication systems of the 3.0l-engine
Cooling and Lubrication Systems
Technical details on the cooling and lubrication systems of the 3.0l-engine
Cooling System
- Liquid-cooled with a high-capacity radiator
- Electric water pump for precise temperature control
- Coolant capacity: 10.5 liters (2.77 gallons)
- Thermostat opening temperature: 87°C (189°F)
- Note: Cooling system is designed for optimal thermal management
Lubrication System
- Wet sump oil system with a capacity of 7.0 liters (7.4 quarts)
- Oil pressure: 3.5-4.5 bar (51-65 psi) at operating temperature
- Recommended oil grade: SAE 5W-40
- Oil change interval: 10,000 miles (16,000 km) or 12 months
- Note: Synthetic oil is required for optimal performance
Electrical and Ignition Systems
Details on the electrical and ignition systems of the 3.0l-engine
Electrical and Ignition Systems
Details on the electrical and ignition systems of the 3.0l-engine
Ignition System
- Direct ignition system with individual coil-on-plug design
- Spark plug gap: 0.8 mm (0.031 inches)
- Ignition timing: 10-15 degrees BTDC at idle
- Spark plug replacement interval: 60,000 miles (96,000 km)
- Note: Ignition system is designed for high reliability and performance
Electrical System
- 12-volt electrical system with a 110-amp alternator
- Battery capacity: 70 Ah
- Starter motor power: 1.4 kW
- Note: Electrical system is designed to support advanced driver-assistance systems
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- EA839
- Displacement
- 2995 cc
- Configuration
- V6
- Orientation
- Longitudinal
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline
- Manufacturer
- Audi AG
- Part Number
- 06E-100-000-AB
Performance
- Power Output
- 349 hp @ 5400-6400 rpm
- Torque
- 369 lb-ft @ 1370-4500 rpm
- Compression Ratio
- 11.2:1
- Redline
- 7000 rpm
- Top Speed
- 155 mph (electronically limited)
- Acceleration 0 To 60
- 4.4 seconds
Dimensions
- Length
- 470 mm
- Width
- 680 mm
- Height
- 620 mm
- Weight
- 172 kg
- Bore
- 84.5 mm
- Stroke
- 89.0 mm
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- Fuel Pump Type
- Electric high-pressure pump
- Fuel Filter Part Number
- 06E-127-401
- injector Part Number
- 06E-906-036
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Part Number
- 8W0-121-253
- Water Pump Type
- Electric
- Coolant Type
- G13 (purple)
Lubrication System
- Oil Capacity
- 7.0 liters
- Oil Type
- VW 502 00 / 504 00
- Oil Filter Part Number
- 06E-115-562
- Oil Pump Type
- Variable displacement
- Oil Pressure
- 3.5-4.5 bar at 2000 rpm
Ignition System
- Spark Plug Type
- NGK PLFER7A8EG
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E-905-115
- Ignition Timing
- Adjustable via ECU
- Spark Plug Torque
- 25 Nm
Emissions
- Emission Standard
- Euro 6
- Catalytic Converter Part Number
- 8W0-254-001
- Oxygen Sensor Part Number
- 06E-906-262
- EGR System
- Integrated
- Particulate Filter
- Not equipped
Maintenance
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain
- Lifetime (no scheduled replacement)
- Air Filter Replacement interval
- 30000 miles
- Coolant Replacement interval
- 5 years or 50000 miles
Diagnostics
- OBD2 Port Location
- Under dashboard, driver's side
- Diagnostic Trouble Codes
- Compliant with ISO 15031-6
- Scan Tool Requirements
- VCDS or equivalent
- Common Fault Codes
-
- P0300
- P0171
- P0420
- Diagnostic Procedures
- Refer to Audi Workshop Manual
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Engine oil and filter change
- Inspect brake system
- Check tire pressure and condition
- Inspect all fluid levels
Use only Audi-approved fluids and parts
- Replace air filter
- Inspect spark plugs
- Check timing chain tension
- Inspect cooling system
Replace spark plugs if necessary
- Replace spark plugs
- Replace fuel filter
- Inspect and replace coolant if necessary
- Check and adjust valve clearance
Perform full diagnostic scan
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L TFSI engine in the 2016-Present Audi S4?
What is the horsepower and torque output of the 3.0L TFSI engine in the 2016-Present Audi S4?
The 3.0L TFSI V6 engine in the Audi S4 produces 349 horsepower at 5,400-6,400 rpm and 369 lb-ft of torque at 1,370-4,500 rpm. This engine features a twin-scroll turbocharger and direct fuel injection for optimal performance.
Q2 What type of fuel is recommended for the 3.0L TFSI engine?
What type of fuel is recommended for the 3.0L TFSI engine?
Audi recommends using premium unleaded gasoline with an octane rating of 91 or higher for the 3.0L TFSI engine. Using lower-octane fuel may result in reduced performance and efficiency.
Q3 What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
The 3.0L TFSI engine requires approximately 7.0 liters (7.4 quarts) of engine oil. Audi recommends using VW 502 00 or VW 504 00 compliant synthetic oil with a viscosity of 5W-40 or 0W-30 for optimal performance and protection.
Q4 What is the service interval for the 3.0L TFSI engine?
What is the service interval for the 3.0L TFSI engine?
Audi recommends an oil change and inspection service every 10,000 miles or 12 months, whichever comes first. Additional maintenance tasks, such as spark plug replacement, are recommended every 60,000 miles.
Q5 Does the 3.0L TFSI engine require any special cooling system maintenance?
Does the 3.0L TFSI engine require any special cooling system maintenance?
The 3.0L TFSI engine uses a liquid cooling system with a mixture of 50% coolant and 50% distilled water. Audi recommends checking the coolant level regularly and replacing the coolant every 5 years or 60,000 miles to prevent corrosion and overheating.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 3.0L TFSI Engine Technical Overview
Coming SoonDetailed technical specifications and performance data for the 3.0L TFSI engine used in the Audi S4.
Audi S4 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2016-Present Audi S4, including service intervals and recommended procedures.
Audi Genuine Parts Catalog
Coming SoonAccess the official catalog of Audi genuine parts for the 3.0L TFSI engine and other components.
Audi Warranty Information
Coming SoonComprehensive details about Audi's warranty coverage, including terms, conditions, and implications for aftermarket modifications.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.