Audi Audi S4 2009-2016 3.0L Engine Specifications
Detailed technical specifications and service documentation for the 3.0L TFSI supercharged V6 engine in the 2009-2016 Audi S4. Includes performance data, component details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2009-2016 Audi S4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'compression ratio', or 'fuel system'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
2995 cc
Max Power
333 hp @ 5500-7000 rpm
Max Torque
325 lb-ft @ 2900-5300 rpm
Compression Ratio
10.3:1
Fuel Economy
18 mpg city / 28 mpg highway
Available Specifications
Engine Design and Configuration
Details about the 3.0l-engine's design, layout, and key components
Engine Design and Configuration
Details about the 3.0l-engine's design, layout, and key components
Engine Layout
- V6 configuration with 90-degree bank angle
- Supercharged direct-injection engine
- Aluminum alloy block and cylinder heads
- Dual overhead camshafts (DOHC) with 4 valves per cylinder
Displacement and Compression
- Displacement: 2995 cc (3.0 liters)
- Compression ratio: 10.3:1
- Bore: 84.5 mm
- Stroke: 89.0 mm
Note: The supercharger enhances performance by increasing air intake pressure.
Performance Specifications
Technical details about the engine's power output, torque, and fuel system
Performance Specifications
Technical details about the engine's power output, torque, and fuel system
Power and Torque
- Maximum power: 333 hp @ 5500-7000 rpm
- Maximum torque: 325 lb-ft @ 2900-5300 rpm
- Redline: 7000 rpm
- Power-to-weight ratio: 8.1 lb/hp
Fuel System
- Direct fuel injection with FSI technology
- Fuel pressure: 1500 psi (103 bar)
- Fuel type: Premium unleaded (91 octane or higher)
- Fuel economy: 18 mpg city / 28 mpg highway
Cooling and Lubrication
Information about the engine's cooling and lubrication systems
Cooling and Lubrication
Information about the engine's cooling and lubrication systems
Cooling System
- Liquid-cooled with an electric water pump
- Radiator capacity: 10.5 liters
- Thermostat opening temperature: 87°C (189°F)
- Coolant type: G12++ or G13
Lubrication System
- Wet sump lubrication system
- Oil capacity: 7.0 liters (with filter)
- Oil type: SAE 5W-40 synthetic
- Oil pressure: 2.5-4.5 bar at 2000 rpm
Note: Regular oil changes are critical for maintaining engine performance.
Emissions and Exhaust
Details about the engine's emissions control and exhaust system
Emissions and Exhaust
Details about the engine's emissions control and exhaust system
Emissions Control
- Complies with Euro 5 and ULEV II standards
- Dual catalytic converters with lambda sensors
- Exhaust gas recirculation (EGR) system
- Particulate filter: Not applicable
Exhaust System
- Dual exhaust with stainless steel mufflers
- Exhaust diameter: 2.5 inches
- Exhaust backpressure: < 0.3 bar at full load
- Sound tuning: Sporty exhaust note with valve control
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- CAKA
- Displacement
- 3.0L (2995 cc)
- Configuration
- V6
- Orientation
- Longitudinal
- Aspiration
- Supercharged
- Fuel Type
- Premium unleaded (91 AKI minimum)
- Manufacturer
- Audi AG
- Production Years
- 2009-2016
Performance
- Power
- 333 hp @ 5500-7000 rpm
- Torque
- 325 lb-ft @ 2900-5300 rpm
- Compression Ratio
- 10.3:1
- Redline
- 7000 rpm
- Top Speed
- 155 mph (electronically limited)
- 0-60 Mph
- 4.9 seconds
Fuel System
- injection Type
- Direct fuel injection (FSI)
- Fuel Pressure
- 1450 psi (100 bar)
- Fuel Pump Part Number
- 06E127025K
- injector Part Number
- 06E906036C
- Fuel Filter Part Number
- 8K0201511M
Ignition System
- Spark Plug Type
- NGK PFR7S8EG
- Spark Plug Gap
- 0.028-0.032 in (0.7-0.8 mm)
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
- Recommended Replacement interval
- Every 60,000 miles
Lubrication System
- Oil Capacity
- 7.4 quarts (7.0 liters)
- Oil Type
- VW 502 00 / 504 00 (5W-40 synthetic)
- Oil Filter Part Number
- 06E115562B
- Oil Pump Type
- Gear-driven
- Oil Pressure
- 43-58 psi (3.0-4.0 bar) at 2000 rpm
Cooling System
- Coolant Capacity
- 12.7 quarts (12.0 liters)
- Coolant Type
- G12++ or G13 (50/50 mix with distilled water)
- Thermostat Opening Temperature
- 194°F (90°C)
- Radiator Part Number
- 8K0121251J
- Water Pump Part Number
- 06E121011F
Supercharger
- Type
- Roots-type supercharger
- Boost Pressure
- 10.1 psi (0.7 bar)
- Supercharger Part Number
- 06E145701R
- intercooler Type
- Air-to-water
- intercooler Part Number
- 06E145803D
Emissions
- Emission Standard
- EU5 / ULEV II
- Catalytic Converter Part Number
- 8K0254105A
- Oxygen Sensor Part Number
- 06E906262C
- EGR System
- Not applicable (direct injection)
- Evaporative Emissions System
- Sealed system with charcoal canister
Maintenance
- Oil Change interval
- 10,000 miles or 12 months
- Spark Plug Replacement interval
- 60,000 miles
- Timing Chain
- Lifetime (no scheduled replacement)
- Supercharger Belt Replacement interval
- 40,000 miles
- Coolant Flush interval
- Every 5 years or 50,000 miles
Diagnostics
- OBDII Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tool
- VCDS (VAG-COM Diagnostic System)
- Sensor References
- Crankshaft Position Sensor: 06E907309ACamshaft Position Sensor: 06E907309CKnock Sensor: 06E905161
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Engine oil and filter change
- Inspect brake system
- Check tire pressure and condition
- Inspect all fluid levels
Use only VW 502 00 / 504 00 approved oil
- Replace supercharger belt
- Inspect spark plugs
- Check ignition system
- Inspect cooling system hoses
Supercharger belt tension must be checked
- Replace spark plugs
- Replace air filter
- Inspect fuel system
- Check exhaust system
Use only NGK PFR7S8EG spark plugs
- Replace coolant
- Inspect timing chain
- Check engine mounts
- Inspect supercharger system
Coolant must be replaced with G12++ or G13
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L TFSI engine in the 2009-2016 Audi S4?
What is the horsepower and torque output of the 3.0L TFSI engine in the 2009-2016 Audi S4?
The 3.0L TFSI V6 engine in the 2009-2016 Audi S4 produces 333 horsepower at 5,500-7,000 RPM and 325 lb-ft of torque at 2,900-5,300 RPM. This engine features a supercharger for improved performance and responsiveness.
Q2 What type of fuel system does the 3.0L TFSI engine use?
What type of fuel system does the 3.0L TFSI engine use?
The 3.0L TFSI engine utilizes a direct fuel injection system, which delivers fuel directly into the combustion chamber at high pressure (up to 150 bar). This system improves fuel efficiency, reduces emissions, and enhances engine performance.
Q3 What is the recommended oil type and capacity for the 3.0L TFSI engine?
What is the recommended oil type and capacity for the 3.0L TFSI engine?
The 3.0L TFSI engine requires synthetic engine oil meeting Audi specification VW 502 00 or higher. The oil capacity is approximately 6.9 liters (7.3 quarts) with a filter change. Always refer to the owner's manual for the exact specifications.
Q4 What is the service interval for the timing chain on the 3.0L TFSI engine?
What is the service interval for the timing chain on the 3.0L TFSI engine?
The timing chain on the 3.0L TFSI engine is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended during major service intervals to ensure proper tension and alignment.
Q5 What is the compression ratio of the 3.0L TFSI engine?
What is the compression ratio of the 3.0L TFSI engine?
The 3.0L TFSI engine has a compression ratio of 10.3:1, which is optimized for performance and efficiency when paired with the supercharger and direct injection system.
Q6 Can the 3.0L TFSI engine be tuned for higher performance?
Can the 3.0L TFSI engine be tuned for higher performance?
Yes, the 3.0L TFSI engine is popular for aftermarket tuning. Performance upgrades such as ECU remapping, upgraded supercharger pulleys, and intercoolers can increase horsepower and torque. However, modifications may void the factory warranty and should be performed by certified professionals.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi S4 3.0L TFSI Engine Technical Specifications
Coming SoonDetailed technical specifications for the 3.0L TFSI engine, including performance metrics, dimensions, and component details.
Audi S4 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2009-2016 Audi S4, including service intervals and recommended procedures for the 3.0L TFSI engine.
Audi Genuine Parts Catalog
Coming SoonCatalog of genuine Audi parts for the 3.0L TFSI engine, ensuring compatibility and optimal performance.
Audi S4 Owner's Manual
Coming SoonOfficial owner's manual for the 2009-2016 Audi S4, providing detailed information on operation, maintenance, and troubleshooting.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.