Audi Audi S3 2013-present

Audi Audi S3 2013-present Drivetrain Specifications

Detailed technical specifications and documentation for the 2013-Present Audi S3 drivetrain system, including engine, transmission, quattro all-wheel drive, differentials, and more.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the drivetrain specifications for the 2013-Present Audi S3, including key features, measurements, and technical details

How to Use

Use the search function to locate specific drivetrain specifications by entering keywords such as 'transmission type', 'torque distribution', or 'driveshaft diameter'.

Navigate through the drivetrain documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Engine Power

292 hp (218 kW)

Torque

280 lb-ft (380 Nm)

Transmission Type

6-speed S tronic

0-60 mph Time

4.7 seconds

Driveshaft Diameter

2.5 inches (63.5 mm)

Available Specifications

Engine and Transmission

Details about the engine and transmission components of the Audi S3 drivetrain

Engine Specifications

2.0L TFSI turbocharged inline-4 engine
Output: 292 hp (218 kW) at 5400-6500 rpm
Torque: 280 lb-ft (380 Nm) at 1800-5500 rpm
Direct fuel injection system
Compression ratio: 9.6:1

Transmission Details

6-speed S tronic dual-clutch automatic transmission
Quattro all-wheel drive system
Torque distribution: 50:50 front-to-rear under normal conditions
Shift times: 200 milliseconds
Note: Transmission includes launch control for optimized acceleration

Note: The S tronic transmission is designed for high-performance driving and seamless gear shifts.

Driveshaft and Axles

Technical details about the driveshaft and axle components

Driveshaft Specifications

Material: High-strength steel
Diameter: 2.5 inches (63.5 mm)
Length: 48 inches (1219 mm)
Balanced for high-speed operation
Maximum rotational speed: 10,000 rpm

Axle Details

Front and rear axles with independent suspension
Axle ratio: 3.68:1
Hollow axle design for reduced weight
CV joints for smooth power delivery
Note: Axles are designed to handle high torque loads

Note: The hollow axle design improves fuel efficiency without compromising strength.

All-Wheel Drive System

Comprehensive details about the Quattro all-wheel drive system

Quattro System Overview

Electronically controlled multi-plate clutch
Torque vectoring for improved cornering
Default torque split: 50:50 front-to-rear
Dynamic torque distribution based on driving conditions
System weight: 75 lbs (34 kg)

Performance Features

0-60 mph acceleration: 4.7 seconds
Top speed: 155 mph (electronically limited)
Enhanced traction in low-grip conditions
Note: System includes a sport differential for rear axle torque vectoring

Note: The Quattro system is optimized for both performance and safety.

Cooling and Lubrication

Details about the cooling and lubrication systems for the drivetrain

Cooling System

Liquid-cooled intercooler
Coolant capacity: 10.5 liters (2.77 gallons)
Radiator size: 24 x 18 inches (610 x 457 mm)
Electric cooling fan with variable speed control
Note: System maintains optimal engine temperature under high load

Lubrication System

Wet sump lubrication system
Oil capacity: 5.7 liters (6 quarts)
Oil pump: Gear-driven, high-pressure
Oil cooler integrated into the system
Note: Synthetic oil recommended for high-performance driving

Note: The lubrication system ensures consistent performance and longevity of drivetrain components.

Search Specifications

Search by specification name, value, or description

Component Specifications

Transmission

Type: 7-speed S tronic dual-clutch automatic

Gear Ratios: 1st: 3.62:1
2nd: 2.09:1
3rd: 1.42:1
4th: 1.03:1
5th: 0.81:1
6th: 0.67:1
7th: 0.56:1
Reverse: 3.17:1

Fluid Type: Audi Genuine Dual Clutch Transmission Fluid (Part No. G 052 529 A2)

Fluid Capacity: 7.0 liters

Operating Temperature Range: -40°C to 150°C

Torque Capacity: 400 Nm

All Wheel Drive System

Type: quattro with Haldex clutch

Torque Distribution: Front: up to 50%
Rear: up to 50%

Haldex Fluid Type: Audi Genuine Haldex Fluid (Part No. G 055 175 A2)

Haldex Fluid Capacity: 0.9 liters

Haldex Filter Replacement interval: Every 40,000 miles or 48 months

Differential

Front Differential Type: Open differential with electronic locking

Rear Differential Type: Haldex clutch-controlled

Differential Fluid Type: Audi Genuine Hypoid Gear Oil (Part No. G 052 145 S2)

Differential Fluid Capacity: Front: 1.1 liters
Rear: 0.8 liters

Differential Fluid Change interval: Every 60,000 miles or 72 months

Drive Shafts

Material: High-strength steel with CV joints

Front Shaft Length: Left: 720 mm, Right: 680 mm

Rear Shaft Length: Left: 540 mm, Right: 520 mm

Cv Joint Type: Rzeppa constant velocity joints

Cv Joint Lubricant: Audi Genuine CV Joint Grease (Part No. G 052 142 A2)

Clutch System

Type: Dual wet clutch

Clutch Pack Material: Sintered metal

Clutch Fluid Type: Audi Genuine Hydraulic Fluid (Part No. G 004 000 M2)

Clutch Fluid Capacity: 0.5 liters

Clutch Life Expectancy: Approximately 100,000 miles under normal conditions

Propeller Shaft

Material: Carbon fiber reinforced polymer

Length: 1,200 mm

Diameter: 80 mm

Balance Tolerance: ± 5 grams at 3,000 RPM

Transfer Case

Type: Electronically controlled multi-plate clutch

Fluid Type: Audi Genuine Transfer Case Fluid (Part No. G 052 145 S2)

Fluid Capacity: 1.2 liters

Operating Temperature Range: -40°C to 120°C

Torque Capacity: 500 Nm

Axles

Front Axle Type: Independent MacPherson strut

Rear Axle Type: Independent multi-link

Axle Fluid Type: Audi Genuine Hypoid Gear Oil (Part No. G 052 145 S2)

Axle Fluid Capacity: Front: 1.5 liters
Rear: 1.3 liters

Axle Fluid Change interval: Every 60,000 miles or 72 months

Mounts And Bushings

Engine Mount Type: Hydraulic with rubber bushings

Transmission Mount Type: Rubber with steel reinforcement

Differential Mount Type: Polyurethane bushings

Bushing Material: High-density rubber with anti-vibration properties

Mount Replacement interval: Inspect every 30,000 miles, replace as needed

Diagnostic Specifications

Fault Codes: P0730: Incorrect gear ratio
P1701: Transmission control module performance
P1890: Clutch pressure control solenoid

Diagnostic Tools

Audi VAS 6154 Diagnostic Scanner
ODIS (Offboard Diagnostic Information System)

Diagnostic Procedures

Check transmission fluid level and condition
Inspect Haldex system for proper operation
Perform clutch adaptation using diagnostic tool

Service Information Service

Detailed service requirements and schedules for the drivetrain system

10,000

Inspect transmission fluid level
Check Haldex system operation
Inspect drive shafts and CV joints for wear

Perform visual inspection and top-up fluids as needed

40,000

Replace Haldex fluid and filter
Inspect differential mounts and bushings
Check clutch system for wear

Use only Audi Genuine fluids and parts

60,000

Replace transmission fluid
Replace differential fluid
Inspect propeller shaft balance

Perform clutch adaptation after fluid replacement

100,000

120

Replace clutch pack if necessary
Inspect and replace worn mounts and bushings
Perform full diagnostic scan of drivetrain system

Replace all fluids and filters as part of major service

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of drivetrain does the 2013-Present Audi S3 use?

The 2013-Present Audi S3 utilizes a quattro all-wheel-drive (AWD) system with a Haldex multi-plate clutch. This system provides dynamic torque distribution between the front and rear axles, optimizing traction and performance in various driving conditions.

What is the torque split in the Audi S3's quattro system?

The Audi S3's quattro system typically operates with a default torque split of 95% to the front wheels and 5% to the rear wheels under normal conditions. However, it can dynamically redistribute torque up to 50% to the rear axle when additional traction is required.

What type of transmission is paired with the drivetrain in the Audi S3?

The Audi S3 is equipped with a 6-speed manual transmission or a 7-speed S tronic dual-clutch automatic transmission, depending on the model year and market. The S tronic transmission features lightning-fast gear changes and optimized efficiency.

What is the maximum torque capacity of the Audi S3's drivetrain?

The drivetrain in the Audi S3 is designed to handle up to 400 Nm (295 lb-ft) of torque, which aligns with the engine's output specifications. This ensures reliable performance under high-stress conditions.

How often should the Haldex clutch fluid be serviced?

Audi recommends servicing the Haldex clutch fluid every 30,000 miles (48,000 km) or 3 years, whichever comes first. This ensures optimal performance and longevity of the all-wheel-drive system.

Can the Audi S3's drivetrain handle off-road conditions?

While the Audi S3's quattro system provides excellent traction on wet, snowy, or uneven surfaces, it is not designed for serious off-road use. The vehicle's low ground clearance and sport-oriented suspension are optimized for on-road performance.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S3 quattro System Technical Overview

Coming Soon

Detailed technical guide explaining the quattro all-wheel-drive system, including its components, operation, and maintenance requirements.

Haldex Clutch Service Procedure

Coming Soon

Step-by-step instructions for servicing the Haldex clutch, including fluid replacement and system diagnostics.

Audi S3 Transmission Options and Specifications

Coming Soon

Comprehensive breakdown of the 6-speed manual and 7-speed S tronic transmissions, including technical specifications and performance data.

Drivetrain Maintenance Schedule for Audi S3

Coming Soon

Official maintenance schedule for the Audi S3 drivetrain, including recommended service intervals and procedures.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.