Audi Audi S3 2013-present DQ250 Transmission Specifications
Comprehensive technical specifications for the DQ250 6-speed dual-clutch transmission used in the 2013-Present Audi S3. This document covers gear ratios, torque capacity, fluid specifications, shift logic, and maintenance procedures specific to the DQ250 transmission system.
Overview Specifications
Comprehensive description of the dq250-transmission specifications for the 2013-Present Audi S3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dq250-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections listed below.
Key Specifications
Maximum Torque Capacity
400 Nm (295 lb-ft)
Transmission Fluid Capacity
7.2 liters (7.6 quarts)
Dry Weight
93 kg (205 lbs)
Gear Ratios (1st to 6th)
3.46:1 to 0.69:1
Operating Temperature Range
-40°C to 150°C (-40°F to 302°F)
Available Specifications
Transmission Design and Architecture
Details about the design, architecture, and key components of the dq250-transmission
Transmission Design and Architecture
Details about the design, architecture, and key components of the dq250-transmission
Transmission Type and Configuration
- 6-speed dual-clutch automatic transmission (DSG)
- Transverse-mounted configuration
- Wet clutch system for improved durability
- Integrated mechatronic control unit
Material and Construction
- Aluminum alloy housing for reduced weight
- High-strength steel gears for durability
- Precision-machined components for smooth operation
- Sealed design to prevent fluid leakage
Note: The wet clutch system requires regular maintenance to ensure optimal performance.
Performance Specifications
Technical details about the performance capabilities of the dq250-transmission
Performance Specifications
Technical details about the performance capabilities of the dq250-transmission
Torque and Power Handling
- Maximum torque capacity: 400 Nm (295 lb-ft)
- Designed for engines up to 300 hp
- Efficient power transfer with minimal loss
- Optimized for high-performance driving conditions
Gear Ratios
- 1st gear: 3.46:1
- 2nd gear: 2.15:1
- 3rd gear: 1.46:1
- 4th gear: 1.07:1
- 5th gear: 0.85:1
- 6th gear: 0.69:1
- Reverse gear: 3.30:1
Note: Gear ratios are optimized for both performance and fuel efficiency.
Maintenance and Fluid Specifications
Information about maintenance requirements and fluid specifications for the dq250-transmission
Maintenance and Fluid Specifications
Information about maintenance requirements and fluid specifications for the dq250-transmission
Fluid Capacity and Type
- Transmission fluid capacity: 7.2 liters (7.6 quarts)
- Recommended fluid: VW/Audi G 052 182 A2
- Fluid change interval: Every 60,000 miles or 5 years
- Fluid temperature operating range: -40°C to 150°C (-40°F to 302°F)
Maintenance Requirements
- Regular inspection of the mechatronic unit
- Clutch wear monitoring via diagnostic tools
- Periodic fluid and filter replacement
- Software updates for the control unit
Note: Neglecting fluid changes can lead to premature clutch wear and transmission failure.
Dimensions and Weight
Physical dimensions and weight specifications of the dq250-transmission
Dimensions and Weight
Physical dimensions and weight specifications of the dq250-transmission
Dimensions
- Length: 410 mm (16.14 inches)
- Width: 350 mm (13.78 inches)
- Height: 320 mm (12.60 inches)
- Mounting bolt pattern: 6-bolt configuration
Weight
- Dry weight: 93 kg (205 lbs)
- Weight with fluid: 98 kg (216 lbs)
- Weight distribution optimized for front-wheel-drive platforms
Note: The compact design allows for easy integration into the Audi S3's engine bay.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 6-speed dual-clutch automatic
- Manufacturer
- Volkswagen Group
- Part Number
- 0AM300050P
- Application
- 2013-Present Audi S3
- Drive Type
- Front-wheel drive with optional Haldex all-wheel drive
Dimensions And Weight
- Length
- 680 mm
- Width
- 420 mm
- Height
- 370 mm
- Weight
- 94 kg (dry)
- Fluid Capacity
- 7.2 liters
Gear Ratios
- 1st Gear
- 3.46:1
- 2nd Gear
- 2.15:1
- 3rd Gear
- 1.46:1
- 4th Gear
- 1.08:1
- 5th Gear
- 0.85:1
- 6th Gear
- 0.69:1
- Reverse Gear
- 3.17:1
- Final Drive Ratio
- 4.24:1
Clutch System
- Clutch Type
- Dual wet multi-plate clutch
- Clutch Pack Part Number
- 0AM198141A
- Clutch Fluid Type
- G052182A2 (VW/Audi DSG fluid)
- Clutch Fluid Capacity
- 1.7 liters
- Clutch Operating Temperature Range
- -40°C to 150°C
Torque Capacity
- Maximum input Torque
- 350 Nm
- Maximum Output Torque
- 400 Nm
- Torque Converter Lockup Speed
- 1800 rpm
Operational Parameters
- Maximum Engine Speed
- 7000 rpm
- Shift Response Time
- 8 ms
- Operating Temperature Range
- -40°C to 140°C
- Maximum Allowable Fluid Temperature
- 150°C
Fluid Specifications
- Transmission Fluid Type
- G052182A2 (VW/Audi DSG fluid)
- Fluid Change interval
- 60000 miles or 60 months
- Fluid Viscosity
- 7.5 cSt at 100°C
- Fluid Operating Temperature Range
- -40°C to 150°C
Electronic Control
- Control Module Part Number
- 0AM927769E
- Sensors
-
- Input speed sensor
- Output speed sensor
- Clutch temperature sensor
- Gear position sensor
- Communication Protocol
- CAN bus
- Software Version
- 8P0907515H
Maintenance Specifications
- Fluid Change interval
- 60000 miles or 60 months
- Filter Change interval
- 60000 miles or 60 months
- Filter Part Number
- 0AM325429
- Seal Kit Part Number
- 0AM398305
- Recommended Service Tools
-
- VAS 6262 (DSG fluid filling tool)
- VAG 1598/38 (diagnostic adapter)
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Code Readout
- Via VCDS or ODIS
- Common Fault Codes
-
- P1734 - Clutch 1 Pressure Adaptation
- P1735 - Clutch 2 Pressure Adaptation
- P2711 - Unexpected Mechanical Gear Disengagement
- Diagnostic Procedure
- Use VCDS or ODIS for detailed fault analysis
Service Information Service
Detailed service requirements and schedules for the DQ250 transmission
- Transmission fluid change
- Transmission filter replacement
- Clutch adaptation reset
- Diagnostic scan for fault codes
Use only VW/Audi-approved DSG fluid (G052182A2)
- Inspect clutch pack wear
- Check for fluid leaks
- Verify electronic control module software version
- Perform full diagnostic scan
Clutch pack replacement may be required if slippage is detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ250 transmission in the 2013-Present Audi S3?
What is the torque capacity of the DQ250 transmission in the 2013-Present Audi S3?
The DQ250 transmission, also known as the 02E, has a torque capacity of up to 350 Nm (258 lb-ft). It is a 6-speed dual-clutch transmission designed for high-performance applications.
Q2 What type of transmission fluid is recommended for the DQ250 in the Audi S3?
What type of transmission fluid is recommended for the DQ250 in the Audi S3?
Audi recommends using genuine VW/Audi Dual Clutch Transmission Fluid (part number G 052 182 A2). The fluid capacity is approximately 7.2 liters (7.6 quarts), including the filter and cooler circuit.
Q3 How often should the DQ250 transmission fluid be replaced in the Audi S3?
How often should the DQ250 transmission fluid be replaced in the Audi S3?
Audi specifies that the transmission fluid and filter should be replaced every 60,000 miles (96,000 km) or 6 years, whichever comes first. Severe driving conditions may require more frequent service.
Q4 What is the shift response time of the DQ250 transmission in the Audi S3?
What is the shift response time of the DQ250 transmission in the Audi S3?
The DQ250 transmission offers a shift response time of approximately 8 milliseconds in Sport mode, making it one of the fastest dual-clutch transmissions in its class.
Q5 Can the DQ250 transmission handle aftermarket performance upgrades?
Can the DQ250 transmission handle aftermarket performance upgrades?
The DQ250 transmission is robust and can handle moderate performance upgrades. However, for significant power increases beyond 400 hp, a transmission software tune or upgraded clutch packs may be required to ensure reliability.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ250 Transmission Service Manual
Coming SoonOfficial service manual for the DQ250 transmission, including detailed procedures for maintenance, repair, and troubleshooting.
DQ250 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing the transmission fluid and filter in the DQ250 transmission, including torque specifications and safety precautions.
Audi S3 Performance Tuning and Transmission Compatibility
Coming SoonTechnical resource discussing the compatibility of the DQ250 transmission with aftermarket performance upgrades and tuning options.
DQ250 Transmission Diagnostic Codes and Troubleshooting
Coming SoonComprehensive list of diagnostic trouble codes (DTCs) specific to the DQ250 transmission and troubleshooting steps for common issues.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.