Audi Audi S3 2013-present

Audi Audi S3 2013-present Body Specifications

Detailed technical specifications and documentation for the body system of the 2013-Present Audi S3, including exterior dimensions, materials, structural design, and component-specific details.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the body specifications for the 2013-Present Audi S3, including key features, measurements, and technical details

How to Use

Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.

Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.

Key Specifications

Length

4466 mm

Curb Weight

1455 kg

Drag Coefficient

0.31

Trunk Capacity

390 liters

Wheelbase

2631 mm

Available Specifications

Exterior Dimensions

Detailed measurements and specifications of the Audi S3's exterior body dimensions

Overall Dimensions

Length: 4466 mm
Width: 1796 mm
Height: 1392 mm
Wheelbase: 2631 mm
Track width (front/rear): 1545 mm / 1523 mm

Ground Clearance and Weight

Ground clearance: 140 mm
Curb weight: 1455 kg
Gross vehicle weight: 1980 kg
Payload capacity: 525 kg

Note: Ground clearance may vary slightly depending on tire size and suspension setup.

Body Materials and Construction

Information on the materials and construction techniques used in the Audi S3's body

Material Composition

High-strength steel used in key structural areas
Aluminum used for hood and doors
Composite materials in select panels
Weight distribution: 60% front / 40% rear

Construction Techniques

Laser welding for precise panel alignment
Adhesive bonding for enhanced rigidity
Hot-stamped components for crash safety
Aerodynamic drag coefficient: 0.31

Note: The use of lightweight materials contributes to improved fuel efficiency and performance.

Aerodynamics and Design Features

Details on the aerodynamic design and exterior features of the Audi S3

Aerodynamic Enhancements

Front air intakes optimized for cooling and airflow
Rear spoiler for improved downforce
Underbody panels for reduced drag
Side mirrors designed for minimal wind resistance

Exterior Design Features

LED headlights with dynamic turn signals
S3-specific front grille and bumper design
Dual exhaust system with chrome tips
Optional panoramic sunroof

Note: The aerodynamic design contributes to a quieter cabin and improved fuel efficiency.

Cargo and Storage

Specifications related to the cargo capacity and storage features of the Audi S3

Trunk Capacity

Standard trunk capacity: 390 liters
Expanded capacity with rear seats folded: 1200 liters
Load width between wheel arches: 1000 mm
Load height: 500 mm

Interior Storage

Glove compartment volume: 5.5 liters
Center console storage: 3.2 liters
Door pocket capacity: 1.5 liters per side
Cup holders: 2 front, 2 rear

Note: Trunk capacity may vary slightly depending on optional equipment.

Search Specifications

Search by specification name, value, or description

Component Specifications

Dimensions

Overall Length: 4466 mm

Overall Width: 1796 mm

Overall Height: 1392 mm

Wheelbase: 2631 mm

Track Width Front: 1545 mm

Track Width Rear: 1523 mm

Ground Clearance: 130 mm

Weight

Curb Weight: 1455 kg

Gross Vehicle Weight: 1980 kg

Payload Capacity: 525 kg

Front Axle Load: 850 kg

Rear Axle Load: 830 kg

Body Materials

Material Type

High-strength steel
Aluminum
Plastic composites

Corrosion Protection: Galvanized steel with 12-year anti-corrosion warranty

Panel Thickness: Roof: 0.7 mm
Doors: 0.8 mm
Hood: 1.0 mm

Aerodynamics

Drag Coefficient: 0.31 Cd

Frontal Area: 2.2 m²

Air Resistance: 0.68 kN at 100 km/h

Doors

Number Of Doors: 4

Door Type: Frameless windows (front), framed (rear)

Door Opening Angle: Front: 70 degrees
Rear: 65 degrees

Hinge Type: Forged steel with integrated check straps

Part Numbers: Front Door Assembly: 8V4837015A
Rear Door Assembly: 8V4837016A

Windows

Front Windshield Thickness: 5.0 mm

Side Window Thickness: 3.5 mm

Rear Window Thickness: 4.5 mm

Glass Type: Laminated safety glass with UV protection

Part Numbers: Front Windshield: 8V3845021A
Rear Windshield: 8V3845022A

Roof

Roof Type: Fixed steel roof with integrated antenna

Roof Load Capacity: 75 kg (dynamic), 150 kg (static)

Sunroof Option: Available: Yes
Type: Panoramic glass sunroof
Part Number: 8V0877045B

Exterior Lighting

Headlights: Type: LED with dynamic turn signals
Part Number: 8V0941005A
Luminous Flux: 1200 lumens

Taillights: Type: LED with dynamic indicators
Part Number: 8V0945095A
Luminous Flux: 800 lumens

Fog Lights: Type: Halogen
Part Number: 8V0941699A

Safety Features

Airbags: Front: Dual-stage airbags
Side: Thorax airbags
Curtain: Full-length curtain airbags

Crumple Zones: Front: Designed to absorb 60% of impact energy
Rear: Designed to absorb 40% of impact energy

Safety Cell: High-strength steel passenger compartment

Maintenance

Body Wash interval: Every 2 weeks or as needed

Waxing Interval: Every 3 months

Rust Protection Check: Annually

Panel Alignment Tolerance: ±1.5 mm

Service Information Service

Detailed service requirements and schedules for the Audi S3 body

10000

Inspect body panels for damage
Check door hinges and latches
Verify window and sunroof operation
Inspect exterior lighting

Ensure all body components are free from corrosion and damage

30000

Lubricate door hinges and locks
Check alignment of body panels
Inspect and clean sunroof drainage system

Use Audi-approved lubricants and cleaning agents

60000

Inspect and replace worn weatherstripping
Check and adjust panel gaps
Verify structural integrity of safety cell

Replace any damaged or worn components with OEM parts

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the exterior dimensions of the 2013-Present Audi S3?

The 2013-Present Audi S3 has an overall length of 4466 mm, a width of 1796 mm (excluding mirrors), and a height of 1392 mm. The wheelbase measures 2631 mm, and the track width is 1545 mm at the front and 1520 mm at the rear.

What materials are used in the construction of the Audi S3 body?

The Audi S3 body utilizes a combination of high-strength steel, aluminum, and composite materials. The hood and front fenders are made of aluminum to reduce weight, while the roof and body structure incorporate high-strength steel for enhanced rigidity and crash safety.

What is the drag coefficient of the Audi S3?

The Audi S3 has a drag coefficient (Cd) of 0.30, achieved through aerodynamic optimization, including a flat underbody, integrated spoilers, and carefully designed air intakes.

What is the curb weight of the Audi S3?

The curb weight of the Audi S3 varies by trim and configuration but typically ranges from 1450 kg to 1520 kg. The lightweight construction contributes to improved performance and fuel efficiency.

Does the Audi S3 feature any advanced body technologies?

Yes, the Audi S3 includes advanced body technologies such as Audi Space Frame (ASF) principles, laser welding for precise panel alignment, and aerodynamic enhancements like active grille shutters to optimize airflow and reduce drag.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi S3 Body Repair Manual

Coming Soon

Official repair manual for the Audi S3 body, covering panel replacement, alignment, and structural repair procedures.

Audi S3 Aerodynamics Guide

Coming Soon

Detailed guide on the aerodynamic design and features of the Audi S3, including airflow management and drag reduction techniques.

Audi S3 Body Material Specifications

Coming Soon

Technical document outlining the materials used in the Audi S3 body construction, including steel, aluminum, and composite applications.

Audi S3 Safety Features Overview

Coming Soon

Comprehensive overview of the safety features integrated into the Audi S3 body, including crash zones and passive safety systems.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.