Audi Audi S3 2006-2012 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L TFSI engine in the 2006-2012 Audi S3. Includes performance data, component details, and maintenance guidelines for the turbocharged direct-injection engine.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2006-2012 Audi S3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 2.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
1984 cc
Max Power
265 hp (198 kW) at 6000 rpm
Max Torque
258 lb-ft (350 Nm) at 2500-5000 rpm
Compression Ratio
9.8:1
Fuel System
Direct injection (FSI)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency
Power Output
- Maximum power output: 265 hp (198 kW) at 6000 rpm
- Peak torque: 258 lb-ft (350 Nm) at 2500-5000 rpm
- Compression ratio: 9.8:1
- Fuel system: Direct injection (FSI)
- Redline: 7000 rpm
Fuel Efficiency
- Combined fuel consumption: 8.5 L/100 km (27.7 mpg)
- CO2 emissions: 199 g/km
- Fuel type: Premium unleaded (95 RON)
- Tank capacity: 55 liters (14.5 gallons)
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and key components
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and key components
Engine Block and Cylinder Head
- Engine block material: Cast aluminum
- Cylinder head material: Aluminum alloy
- Cylinder arrangement: Inline-4
- Bore x stroke: 82.5 mm x 92.8 mm
- Displacement: 1984 cc
Valvetrain and Timing
- Valvetrain: DOHC, 16 valves
- Camshaft drive: Timing chain
- Variable valve timing: Audi Valvelift System
- Intake valve diameter: 33.0 mm
- Exhaust valve diameter: 28.0 mm
Note: The timing chain is designed for durability and requires minimal maintenance.
Cooling and Lubrication
Details on the cooling and lubrication systems of the 2.0l-engine, including fluid capacities and system components
Cooling and Lubrication
Details on the cooling and lubrication systems of the 2.0l-engine, including fluid capacities and system components
Cooling System
- Coolant capacity: 7.5 liters (2.0 gallons)
- Radiator type: Aluminum cross-flow
- Thermostat opening temperature: 87°C (189°F)
- Coolant type: G12++ (pink)
Lubrication System
- Oil capacity: 4.6 liters (4.9 quarts)
- Oil type: VW 502 00 / 504 00 specification
- Oil filter type: Cartridge-style
- Oil pressure: 2.5-4.5 bar at 2000 rpm
Note: Use only approved engine oils to ensure optimal performance and longevity.
Exhaust and Emissions
Information on the exhaust system and emissions control technologies used in the 2.0l-engine
Exhaust and Emissions
Information on the exhaust system and emissions control technologies used in the 2.0l-engine
Exhaust System
- Exhaust manifold material: Cast iron
- Catalytic converter: Close-coupled, 400 cells per square inch
- Exhaust pipe diameter: 60 mm
- Muffler type: Dual-chamber
Emissions Control
- Emissions standard: Euro 5
- EGR system: Integrated with intake manifold
- Particulate filter: Not equipped
- Oxygen sensors: 2 (pre- and post-catalyst)
Note: The Euro 5 compliance ensures reduced NOx and CO2 emissions.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- CDLA
- Displacement
- 2.0 liters (1984 cc)
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel System
- Direct Injection (FSI)
- Valvetrain
- DOHC, 16 valves
- Bore X Stroke
- 82.5 mm x 92.8 mm
- Compression Ratio
- 9.8:1
Performance Specifications
- Max Power
- 265 hp (198 kW) @ 6000 rpm
- Max Torque
- 258 lb-ft (350 Nm) @ 2500-5000 rpm
- Redline
- 7000 rpm
- Fuel Type
- Premium unleaded (95 RON minimum)
- Emission Standard
- EURO 5
Turbocharger Specifications
- Type
- Garrett GTX2867R
- Boost Pressure
- 1.2 bar (17.4 psi)
- Wastegate Actuation
- Electronic
- intercooler Type
- Front-mounted air-to-air
- Turbo Lubrication
- Engine oil-fed
Lubrication System
- Oil Capacity
- 4.6 liters (with filter)
- Oil Type
- VW 502 00 / 504 00 specification
- Oil Pressure
- 2.5-4.5 bar at 2000 rpm
- Oil Filter Part Number
- 06E 115 562 B
- Oil Change interval
- 10,000 miles or 12 months
Cooling System
- Coolant Capacity
- 7.0 liters
- Coolant Type
- G12++ (pink)
- Thermostat Opening Temp
- 87°C (189°F)
- Radiator Part Number
- 8P0 121 251 H
- Water Pump Part Number
- 06H 121 026 H
Ignition System
- Spark Plug Type
- NGK PFR7S8EG
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E 905 115 E
- Ignition Timing
- Adjustable via ECU
- Spark Plug Torque
- 30 Nm (22 lb-ft)
Fuel System Specifications
- Fuel Pump Part Number
- 8E0 919 051 H
- Fuel Pressure
- 40-50 bar (580-725 psi)
- injector Part Number
- 06E 906 036 C
- Fuel Filter Part Number
- 1K0 201 051 C
- Fuel Tank Capacity
- 55 liters (14.5 gallons)
Engine Management
- Ecu Part Number
- 8P0 907 115 J
- Software Version
- 0002
- Diagnostic interface
- OBD-II
- Sensor References
- Maf Sensor Part Number: 06F 906 461 BMap Sensor Part Number: 06F 906 051 CCrankshaft Sensor Part Number: 06E 906 433 C
Maintenance Specifications
- Timing Belt Interval
- 120,000 miles or 5 years
- Timing Belt Part Number
- 06H 109 119 D
- Tensioner Part Number
- 06H 109 477 A
- Serpentine Belt Part Number
- 06E 903 137 F
- Serpentine Belt Tensioner Part Number
- 06E 903 315 B
Diagnostic Specifications
- Compression Test
- Minimum Compression: 10 bar (145 psi)Maximum Variation: 1.5 bar (22 psi) between cylinders
- Leakdown Test
- Maximum Leakage: 10%Acceptable Range: 5-10%
- Turbocharger Diagnostics
- Boost Leak Test: Maximum 0.2 bar (2.9 psi) dropShaft Play Limit: 0.5 mm axial, 1.0 mm radial
Service Information Service
Detailed service requirements and schedules for the 2.0L TFSI engine
- Oil and filter change
- Inspect timing belt condition
- Check coolant level and concentration
- Inspect turbocharger system for leaks
- Check ignition system components
Use only VW 502 00 / 504 00 specification oil
- Replace spark plugs
- Inspect and clean MAF sensor
- Check fuel system pressure
- Inspect engine mounts
- Replace cabin air filter
Reset service interval reminder after maintenance
- Replace timing belt and tensioner
- Replace water pump
- Replace serpentine belt
- Inspect and clean intake valves
- Perform compression and leakdown tests
Timing belt replacement is critical to prevent engine damage
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L TFSI engine in the 2006-2012 Audi S3?
What is the horsepower and torque output of the 2.0L TFSI engine in the 2006-2012 Audi S3?
The 2.0L TFSI engine in the 2006-2012 Audi S3 produces 265 horsepower at 6,000 rpm and 258 lb-ft of torque between 2,500 and 5,000 rpm. This engine features turbocharging and direct fuel injection for optimal performance.
Q2 What type of oil is recommended for the 2.0L TFSI engine?
What type of oil is recommended for the 2.0L TFSI engine?
Audi recommends using fully synthetic engine oil with a viscosity grade of 5W-40 that meets the VW 502 00 specification. The oil capacity is approximately 4.6 liters (4.9 quarts) with a filter change.
Q3 What is the service interval for the timing belt on the 2.0L TFSI engine?
What is the service interval for the timing belt on the 2.0L TFSI engine?
The timing belt on the 2.0L TFSI engine should be inspected every 60,000 miles (96,000 km) and replaced every 120,000 miles (193,000 km) or 5 years, whichever comes first. Failure to replace the timing belt can result in severe engine damage.
Q4 What is the compression ratio of the 2.0L TFSI engine?
What is the compression ratio of the 2.0L TFSI engine?
The 2.0L TFSI engine has a compression ratio of 9.8:1, which is optimized for turbocharged performance and fuel efficiency.
Q5 How often should the spark plugs be replaced on the 2.0L TFSI engine?
How often should the spark plugs be replaced on the 2.0L TFSI engine?
Audi recommends replacing the spark plugs every 40,000 miles (64,000 km) or 4 years, whichever comes first. Use only OEM-specified spark plugs to ensure proper engine performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 2.0L TFSI Engine Maintenance Guide
Coming SoonA detailed guide covering routine maintenance procedures, including oil changes, spark plug replacement, and timing belt inspection.
Turbocharger Care and Maintenance for 2.0L TFSI
Coming SoonLearn how to properly maintain the turbocharger system to ensure longevity and optimal performance.
Audi S3 2.0L TFSI Technical Specifications
Coming SoonComprehensive technical specifications for the 2.0L TFSI engine, including torque curves, fuel system details, and emissions data.
Diagnosing Common 2.0L TFSI Engine Issues
Coming SoonA troubleshooting guide for common issues such as oil consumption, misfires, and turbocharger problems.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.