Audi Audi S3 1999-2003 VL300 Transmission Specifications
Detailed technical specifications for the VL300 transmission system used in the 1999-2003 Audi S3. This document covers gear ratios, torque capacity, fluid requirements, shift patterns, and maintenance procedures specific to the VL300 transmission.
Overview Specifications
Comprehensive description of the vl300-transmission specifications for the 1999-2003 Audi S3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific vl300-transmission specifications by entering keywords such as 'gear ratios', 'torque capacity', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Transmission Type
6-speed manual
Torque Capacity
350 Nm (258 lb-ft)
Fluid Capacity
2.6 liters (2.75 quarts)
Gear Ratios
1st: 3.300:1, 6th: 0.684:1
Weight
Approx. 45 kg (99 lbs)
Available Specifications
Transmission Design and Layout
Detailed information about the design, layout, and construction of the vl300-transmission
Transmission Design and Layout
Detailed information about the design, layout, and construction of the vl300-transmission
Transmission Type and Configuration
- 6-speed manual transmission
- Front-wheel drive configuration
- Transverse-mounted design
- Aluminum alloy housing for reduced weight
Gear Ratios
- 1st gear: 3.300:1
- 2nd gear: 1.944:1
- 3rd gear: 1.308:1
- 4th gear: 0.967:1
- 5th gear: 0.806:1
- 6th gear: 0.684:1
- Reverse gear: 3.500:1
Note: Gear ratios optimized for performance and fuel efficiency
Technical Specifications
Detailed technical specifications and measurements for the vl300-transmission
Technical Specifications
Detailed technical specifications and measurements for the vl300-transmission
Torque Capacity
- Maximum torque capacity: 350 Nm (258 lb-ft)
- Designed for high-performance applications
- Suitable for turbocharged engines
Fluid Capacity and Type
- Transmission fluid capacity: 2.6 liters (2.75 quarts)
- Recommended fluid: Audi Genuine G 052 512 A2
- Fluid change interval: Every 60,000 miles or 5 years
Note: Use only specified transmission fluid to ensure optimal performance
Maintenance and Service
Guidelines for maintaining and servicing the vl300-transmission
Maintenance and Service
Guidelines for maintaining and servicing the vl300-transmission
Scheduled Maintenance
- Inspect transmission fluid level every 10,000 miles
- Check for leaks and wear during routine service
- Replace clutch components as needed
Common Issues and Troubleshooting
- Symptoms of worn synchros: Difficulty shifting, grinding noise
- Potential causes of fluid leaks: Damaged seals, loose bolts
- Recommended diagnostic tools: VAG-COM or equivalent
Note: Address issues promptly to avoid further damage
Performance and Upgrades
Information on performance characteristics and potential upgrades for the vl300-transmission
Performance and Upgrades
Information on performance characteristics and potential upgrades for the vl300-transmission
Performance Characteristics
- Smooth and precise gear shifts
- Enhanced durability for high-torque applications
- Low rotational mass for improved acceleration
Upgrade Options
- Aftermarket short-shift kits available
- Upgraded clutch kits for increased torque handling
- Lightweight flywheel options for faster revving
Note: Upgrades should be installed by a qualified technician
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 5-speed manual
- Model Code
- VL300
- Manufacturer
- Audi AG
- Applicable Models
-
- 1999-2003 Audi S3
- Part Number
- 01E300043D
Gear Ratios
- 1st Gear
- 3.667:1
- 2nd Gear
- 2.050:1
- 3rd Gear
- 1.370:1
- 4th Gear
- 1.032:1
- 5th Gear
- 0.837:1
- Reverse Gear
- 3.500:1
Torque Capacity
- Maximum Torque
- 280 Nm
- Recommended Torque Limit
- 250 Nm
- Tolerance
- +/- 5 Nm
Fluid Specifications
- Fluid Type
- Synthetic Gear Oil
- Viscosity
- 75W-90
- Capacity
- 2.6 liters
- Recommended Change interval
- 60,000 miles or 60 months
- Audi Part Number
- G052145S2
Clutch Specifications
- Clutch Type
- Single dry plate
- Clutch Diameter
- 240 mm
- Clutch Material
- Organic
- Recommended Replacement interval
- 100,000 miles
- Audi Part Number
- 8N0141161A
Synchronizers
- Type
- Double-cone synchronizers (1st and 2nd gear)
- Material
- Brass
- Wear Limit
- 0.5 mm
- Recommended inspection Interval
- 50,000 miles
Shift Mechanism
- Shift Type
- Cable-operated
- Shift Throw
- 45 mm
- Shift Effort
- 25-30 N
- Adjustment interval
- 30,000 miles
Differential Specifications
- Type
- Mechanical limited-slip differential
- Ratio
- 4.235:1
- Oil Capacity
- 1.2 liters
- Oil Type
- Synthetic Gear Oil
- Audi Part Number
- G052145S2
Operational Limits
- Maximum input Speed
- 7000 rpm
- Maximum Output Speed
- 250 km/h
- Operating Temperature Range
- -30°C to 120°C
- Warning Temperature
- 130°C
Diagnostic Specifications
- Diagnostic Port
- OBD-II
- Fault Codes
-
- P0700
- P0701
- P0702
- P0703
- Diagnostic Tool
- VAG-COM
- Recommended Diagnostic interval
- Every 30,000 miles
Maintenance Specifications
- inspection Intervals
-
- Miles: 30,000, Months: 24, Items: Check gear oil level,Inspect clutch operation,Check for leaks, Note: Replace gear oil if contamination is detected
- Miles: 60,000, Months: 60, Items: Replace gear oil,Inspect synchronizers,Check differential oil, Note: Use only Audi-approved fluids
Service Information Service
Detailed service requirements and schedules for the VL300 transmission
- Inspect gear oil level
- Check clutch operation
- Inspect for leaks
Replace gear oil if contamination is detected
- Replace gear oil
- Inspect synchronizers
- Check differential oil
Use only Audi-approved fluids
Common Questions
Find answers to common questions about torque specifications
Q1 What type of transmission fluid should be used in the VL300 transmission for a 1999-2003 Audi S3?
What type of transmission fluid should be used in the VL300 transmission for a 1999-2003 Audi S3?
The VL300 transmission requires Audi-approved synthetic transmission fluid, specifically G 052 162 A2. The fluid capacity is approximately 2.6 liters. Always ensure the fluid meets Audi's specifications to avoid damage to the transmission.
Q2 What is the recommended service interval for the VL300 transmission in a 1999-2003 Audi S3?
What is the recommended service interval for the VL300 transmission in a 1999-2003 Audi S3?
Audi recommends inspecting the transmission fluid every 40,000 miles (64,000 km) and replacing it every 80,000 miles (128,000 km). However, if the vehicle is driven under severe conditions (e.g., frequent towing or high-performance driving), more frequent servicing may be required.
Q3 How do I identify if my VL300 transmission is malfunctioning?
How do I identify if my VL300 transmission is malfunctioning?
Common signs of a malfunctioning VL300 transmission include rough shifting, delayed engagement, unusual noises (e.g., whining or grinding), and transmission fluid leaks. If any of these symptoms occur, it is recommended to have the transmission inspected by a qualified Audi technician immediately.
Q4 Can the VL300 transmission be repaired, or does it need to be replaced entirely?
Can the VL300 transmission be repaired, or does it need to be replaced entirely?
The VL300 transmission can often be repaired, depending on the issue. Common repairs include replacing worn clutch packs, solenoids, or seals. However, in cases of severe internal damage, a full transmission replacement may be necessary. Always consult a certified Audi technician for an accurate diagnosis.
Q5 What is the torque specification for the VL300 transmission mounting bolts?
What is the torque specification for the VL300 transmission mounting bolts?
The torque specification for the VL300 transmission mounting bolts is 40 Nm (30 lb-ft). Ensure all bolts are tightened evenly and in the correct sequence to avoid misalignment or damage to the transmission housing.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi VL300 Transmission Service Manual
Coming SoonOfficial service manual for the VL300 transmission, including detailed repair procedures, torque specifications, and fluid requirements.
Audi S3 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing transmission fluid in the VL300 transmission, including safety precautions and tools required.
VL300 Transmission Troubleshooting Guide
Coming SoonComprehensive troubleshooting guide for diagnosing common issues with the VL300 transmission, including error codes and repair recommendations.
Audi Genuine Parts Catalog for VL300 Transmission
Coming SoonCatalog of genuine Audi parts for the VL300 transmission, including part numbers and compatibility information.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.