Audi Audi RS5 2017-present Exhaust Specifications
Comprehensive technical specifications for the 2017-Present Audi RS5 exhaust system, including detailed information on components, materials, dimensions, and performance metrics.
Overview Specifications
Comprehensive description of the exhaust specifications for the 2017-Present Audi RS5, including key features, measurements, and technical details. This section provides detailed insights into the exhaust system's design, components, and performance characteristics.
How to Use
Use the search function to locate specific exhaust specifications by entering keywords such as 'catalytic converter,' 'muffler,' or 'exhaust diameter.'
Navigate through the exhaust documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Exhaust Diameter
70 mm (2.75 in)
System Weight
22.5 kg (49.6 lbs)
Backpressure
1.2 psi at 6000 RPM
Sound Pressure Level
85 dB at 3000 RPM
Catalytic Converter Temperature
400°C to 800°C (752°F to 1472°F)
Available Specifications
Exhaust System Overview
This section covers the general design and layout of the Audi RS5 exhaust system, including its components and integration with the vehicle's powertrain.
Exhaust System Overview
This section covers the general design and layout of the Audi RS5 exhaust system, including its components and integration with the vehicle's powertrain.
Exhaust System Layout
- Dual exhaust system with quad tailpipes
- Stainless steel construction for durability and corrosion resistance
- Integrated with the 2.9L TFSI V6 engine for optimal performance
- Exhaust diameter: 70 mm (2.75 in)
- Total system weight: 22.5 kg (49.6 lbs)
Exhaust Gas Flow
- Optimized flow path for reduced backpressure
- High-flow catalytic converters for improved emissions control
- Exhaust gas temperature sensor integrated into the system
- Flow rate: 450 CFM (cubic feet per minute) at full load
- Backpressure: 1.2 psi at 6000 RPM
Note: The exhaust system is designed to balance performance and emissions compliance.
Exhaust Components
Detailed breakdown of the key components in the Audi RS5 exhaust system, including materials, dimensions, and functional specifications.
Exhaust Components
Detailed breakdown of the key components in the Audi RS5 exhaust system, including materials, dimensions, and functional specifications.
Catalytic Converters
- Dual catalytic converters with ceramic substrates
- Substrate cell density: 600 cells per square inch (CPSI)
- Operating temperature range: 400°C to 800°C (752°F to 1472°F)
- Emissions compliance: Euro 6 and EPA Tier 3 standards
- Replacement interval: 160,000 km (100,000 miles)
Muffler and Resonators
- Twin mufflers with internal baffles for noise reduction
- Resonators integrated to minimize drone at low RPM
- Sound pressure level: 85 dB at 3000 RPM
- Material: 304-grade stainless steel
- Muffler volume: 12 liters (0.42 cubic feet) each
Note: The muffler design enhances the sporty exhaust note while maintaining cabin comfort.
Performance and Tuning
This section focuses on the performance characteristics of the exhaust system and available tuning options for enhanced power and sound.
Performance and Tuning
This section focuses on the performance characteristics of the exhaust system and available tuning options for enhanced power and sound.
Performance Enhancements
- Valvetronic exhaust system for adjustable sound profiles
- Power gain: up to 10 HP with aftermarket tuning
- Torque increase: up to 15 Nm (11 lb-ft) with optimized flow
- Exhaust valve actuation speed: 0.2 seconds
- Tuning compatibility: Audi Drive Select system
Sound Profiles
- Dynamic mode: aggressive exhaust note with increased volume
- Comfort mode: subdued sound for relaxed driving
- Custom mode: user-adjustable settings via MMI interface
- Exhaust sound frequency range: 80 Hz to 250 Hz
- External sound actuator for enhanced auditory feedback
Note: The Valvetronic system allows drivers to tailor the exhaust sound to their preferences.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
General Specifications
- System Type
- Dual exhaust with integrated valves
- Material
- Stainless steel
- Configuration
- Twin-pipe, dual muffler
- Valve Control
- Electronically controlled exhaust flaps
- Emission Compliance
- Euro 6 and EPA Tier 3 compliant
Exhaust Manifold
- Material
- Cast iron with heat-resistant coating
- Part Number
- 06E253033H
- Bolt Torque
- 25 Nm + 90°
- Gasket Material
- Graphite-impregnated steel
- Heat Shield Thickness
- 1.5 mm
Catalytic Converters
- Type
- Dual ceramic honeycomb
- Part Number
- 8W0254101A
- Substrate Material
- Ceramic with platinum-palladium-rhodium coating
- Cell Density
- 600 cells per square inch
- Operating Temperature
- 400°C to 800°C
- Efficiency
- >98%
Resonators
- Type
- Helmholtz resonator
- Part Number
- 8W0253105B
- Material
- Stainless steel
- Diameter
- 120 mm
- Length
- 450 mm
- Weight
- 3.2 kg
Mufflers
- Type
- Dual-chamber with valve control
- Part Number
- 8W0253103C
- Material
- Stainless steel
- Diameter
- 150 mm
- Length
- 600 mm
- Weight
- 8.5 kg
- Sound Level
- 74 dB at idle, 92 dB at full throttle
Exhaust Pipes
- Material
- Stainless steel
- Diameter
- 70 mm
- Wall Thickness
- 1.2 mm
- Flex Pipe
- Material: Braided stainless steel with PTFE linerLength: 200 mmPart Number: 8W0253111D
- Clamp Type
- V-band clamps with 10 mm bolts
- Clamp Torque
- 15 Nm
Exhaust Valves
- Type
- Electronically controlled butterfly valves
- Part Number
- 8W0253115E
- Actuator Type
- Stepper motor
- Response Time
- <200 ms
- Operating Temperature Limit
- 600°C
- Control Mode
- Dynamic, Comfort, Auto, Individual
Exhaust Tips
- Material
- Polished stainless steel
- Part Number
- 8W0253117F
- Diameter
- 90 mm
- Length
- 120 mm
- Finish
- High-gloss black with RS logo
- Weight
- 0.8 kg
Mounting System
- Hanger Material
- Rubber with steel reinforcement
- Hanger Part Number
- 8W0253121G
- Bracket Material
- Powder-coated steel
- Bracket Part Number
- 8W0253123H
- Bolt Torque
- 22 Nm
- Vibration Damping
- Integrated rubber isolators
Diagnostic Specifications
- Lambda Sensor Type
- Wideband oxygen sensor
- Lambda Sensor Part Number
- 06E906262L
- Sensor Operating Temperature
- -40°C to 900°C
- Sensor Response Time
- <100 ms
- Fault Codes
-
- P0420 - Catalyst System Efficiency Below Threshold
- P0430 - Catalyst System Efficiency Below Threshold (Bank 2)
- P0135 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
- Diagnostic Tool
- Audi VAS 6154 or equivalent
Service Information Service
Detailed service requirements and schedules for the exhaust system
- Inspect exhaust system for leaks and damage
- Check exhaust hangers and brackets for wear
- Verify proper operation of exhaust valves
Use Audi-approved diagnostic tools for valve calibration
- Replace lambda sensors if necessary
- Inspect catalytic converters for efficiency
- Check and tighten all exhaust clamps
Ensure catalytic converter efficiency is above 95%
- Replace catalytic converters if efficiency is below 90%
- Inspect and replace exhaust gaskets as needed
- Check exhaust system alignment and adjust if necessary
Use OEM parts for replacements to maintain performance
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the exhaust system configuration on the 2017-Present Audi RS5?
What is the exhaust system configuration on the 2017-Present Audi RS5?
The 2017-Present Audi RS5 features a dual exhaust system with two oval tailpipes on each side, totaling four tailpipes. The system includes a sport exhaust with electronically controlled flaps that adjust based on driving mode and engine load for optimal performance and sound.
Q2 What is the diameter of the exhaust pipes on the Audi RS5?
What is the diameter of the exhaust pipes on the Audi RS5?
The primary exhaust pipes on the Audi RS5 have a diameter of 70 mm (2.75 inches), while the secondary pipes leading to the tailpipes are 80 mm (3.15 inches) in diameter. These dimensions ensure efficient exhaust flow and performance.
Q3 Does the Audi RS5 exhaust system include a catalytic converter?
Does the Audi RS5 exhaust system include a catalytic converter?
Yes, the Audi RS5 exhaust system includes two high-flow catalytic converters, one for each bank of the V6 engine. These converters are designed to meet Euro 6 emissions standards while maintaining performance.
Q4 Can the exhaust system be modified for increased performance?
Can the exhaust system be modified for increased performance?
While modifications are possible, such as installing an aftermarket exhaust or removing the catalytic converters, these changes may void the vehicle's warranty and could result in non-compliance with emissions regulations. Always consult Audi or a certified technician before making modifications.
Q5 What is the recommended maintenance schedule for the exhaust system?
What is the recommended maintenance schedule for the exhaust system?
Audi recommends inspecting the exhaust system every 15,000 miles or annually, whichever comes first. This includes checking for leaks, corrosion, and ensuring all mounting points and hangers are secure. Replace any damaged components with genuine Audi parts.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi RS5 Exhaust System Technical Guide
Coming SoonDetailed technical guide covering the design, components, and maintenance of the Audi RS5 exhaust system.
Audi Genuine Parts Catalog
Coming SoonOfficial catalog for genuine Audi exhaust components, including gaskets, clamps, and mufflers.
Audi RS5 Service Manual
Coming SoonComprehensive service manual for the Audi RS5, including exhaust system repair and replacement procedures.
Audi Warranty Information
Coming SoonOfficial warranty documentation outlining coverage for the exhaust system and implications of modifications.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.