Audi Audi RS5 2010-2016 Suspension Specifications
Comprehensive technical specifications for the 2010-2016 Audi RS5 suspension system, including front and rear suspension components, alignment settings, spring rates, damper specifications, and torque values.
Overview Specifications
Comprehensive description of the suspension specifications for the 2010-2016 Audi RS5, including key features, measurements, and technical details. This section provides detailed insights into the suspension system, covering front and rear setups, damping systems, and alignment specifications.
How to Use
Use the search function to locate specific suspension components or specifications by entering keywords such as 'front suspension', 'rear suspension', or 'alignment settings'.
Navigate through the suspension documentation by selecting the relevant section from the table of contents. Each section is organized into subsections for easy access to specific details.
Key Specifications
Front Track Width
1585 mm
Rear Track Width
1572 mm
Front Spring Rate
35 N/mm
Rear Spring Rate
40 N/mm
Standard Tire Pressure
2.4 bar (front), 2.2 bar (rear)
Available Specifications
Front Suspension
Details about the front suspension system, including the type of suspension, key components, and alignment specifications.
Front Suspension
Details about the front suspension system, including the type of suspension, key components, and alignment specifications.
Suspension Type and Components
- Double-wishbone front suspension with aluminum control arms
- Electromechanical power steering system
- Stabilizer bar diameter: 28 mm
- Spring rate: 35 N/mm
- Front track width: 1585 mm
Alignment Specifications
- Camber angle: -0.5° to -1.0°
- Toe angle: 0.10° to 0.20°
- Caster angle: 7.5° to 8.5°
- Kingpin inclination: 12.5°
Note: Alignment settings may vary slightly depending on tire and wheel configuration.
Rear Suspension
Information on the rear suspension system, including the type of suspension, key components, and alignment specifications.
Rear Suspension
Information on the rear suspension system, including the type of suspension, key components, and alignment specifications.
Suspension Type and Components
- Multi-link rear suspension with aluminum components
- Stabilizer bar diameter: 22 mm
- Spring rate: 40 N/mm
- Rear track width: 1572 mm
- Adaptive damping system (optional)
Alignment Specifications
- Camber angle: -1.5° to -2.0°
- Toe angle: 0.15° to 0.25°
- Thrust angle: 0°
- Toe-out on turns: 1.5°
Note: Adaptive damping system adjusts suspension stiffness based on driving conditions.
Damping System
Details about the damping system, including the type of dampers, adjustment options, and performance characteristics.
Damping System
Details about the damping system, including the type of dampers, adjustment options, and performance characteristics.
Damper Types and Features
- Gas-filled monotube shock absorbers
- Optional Audi Magnetic Ride adaptive damping
- Damping force adjustment range: 20% to 80%
- Rebound and compression damping independently adjustable
Performance Characteristics
- Damping response time: <10 ms
- Maximum damping force: 5000 N
- Comfort mode damping reduction: 30%
- Dynamic mode damping increase: 50%
Note: Audi Magnetic Ride system uses magnetorheological fluid for real-time damping adjustments.
Wheel and Tire Specifications
Information on the wheel and tire setup, including sizes, offsets, and recommended tire pressures.
Wheel and Tire Specifications
Information on the wheel and tire setup, including sizes, offsets, and recommended tire pressures.
Wheel Specifications
- Standard wheel size: 19x9 inches
- Wheel offset: 29 mm
- Bolt pattern: 5x112
- Center bore diameter: 66.6 mm
Tire Specifications
- Standard tire size: 265/35 R19
- Recommended tire pressure: 2.4 bar (front), 2.2 bar (rear)
- Maximum load rating: 825 kg per tire
- Speed rating: Y (up to 300 km/h)
Note: Tire pressure should be adjusted based on load and driving conditions.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Front Suspension
- Type
- Five-link front suspension with aluminum control arms
- Spring Rate
- 32 N/mm
- Shock ABSorber Type
- Gas-filled monotube
- Stabilizer Bar Diameter
- 28 mm
- Bushing Material
- Synthetic rubber with aluminum housing
- Part Numbers
- Control Arm Kit: 8T0407151AShock ABSorber: 8T0413031EStabilizer Bar: 8T0411311B
Rear Suspension
- Type
- Trapezoidal-link rear suspension with aluminum control arms
- Spring Rate
- 36 N/mm
- Shock ABSorber Type
- Gas-filled monotube
- Stabilizer Bar Diameter
- 22 mm
- Bushing Material
- Synthetic rubber with aluminum housing
- Part Numbers
- Control Arm Kit: 8T0515131AShock ABSorber: 8T0513031FStabilizer Bar: 8T0511311C
Adaptive Damping System
- Type
- Audi Magnetic Ride
- Response Time
- 5 ms
- Adjustment Range
- Continuous damping force adjustment
- Operating Temperature Range
- -40°C to 120°C
- Part Numbers
- Control Module: 8T0907375ASensor Kit: 8T0907651B
Wheel Alignment
- Front Camber
- -0.5° to -1.0°
- Rear Camber
- -1.5° to -2.0°
- Front Toe
- 0.10° to 0.20°
- Rear Toe
- 0.15° to 0.25°
- Caster
- 7.5° to 8.5°
- Tolerance
- ±0.2°
Suspension Bushings
- Front Bushing Material
- Polyurethane with steel sleeve
- Rear Bushing Material
- Polyurethane with steel sleeve
- Durometer Hardness
- 75 Shore A
- Service Life
- 100,000 miles or 10 years
- Part Numbers
- Front Bushing Kit: 8T0407699ARear Bushing Kit: 8T0515699B
Suspension Mounts
- Front Mount Material
- Reinforced rubber with aluminum core
- Rear Mount Material
- Reinforced rubber with aluminum core
- Load Capacity
- 500 kg
- Service Life
- 80,000 miles or 8 years
- Part Numbers
- Front Mount: 8T0412331CRear Mount: 8T0512331D
Suspension Springs
- Front Spring Type
- Progressive-rate coil spring
- Rear Spring Type
- Progressive-rate coil spring
- Front Spring Free Length
- 320 mm
- Rear Spring Free Length
- 340 mm
- Part Numbers
- Front Spring: 8T0411105ARear Spring: 8T0511105B
Suspension Limits
- Maximum Compression
- 120 mm
- Maximum Rebound
- 100 mm
- Maximum Lateral Load
- 1500 kg
- Maximum Vertical Load
- 2000 kg
- Operational Speed Limit
- 250 km/h
Diagnostic Specifications
- Fault Codes
- C1031: Front left shock absorber faultC1032: Front right shock absorber faultC1033: Rear left shock absorber faultC1034: Rear right shock absorber fault
- Diagnostic Tool
- Audi VAS 5054A
- Test Procedures
-
- Check for fault codes using VAS 5054A
- Inspect shock absorber resistance
- Verify adaptive damping system response
Maintenance Specifications
- Torque Specifications
- Control Arm Bolts: 90 Nm + 90°Shock ABSorber Mounting Bolts: 70 NmStabilizer Bar Link Nuts: 50 Nm
- Lubrication Points
-
- Control arm bushings
- Stabilizer bar bushings
- Shock absorber mounts
- inspection Intervals
- Miles: Every 10,000 milesMonths: Every 12 monthsItems: Check for worn bushings, Inspect shock absorbers for leaks, Verify wheel alignment
Service Information Service
Detailed service requirements and schedules for the Audi RS5 suspension system
- Inspect suspension components for wear
- Check shock absorbers for leaks
- Verify wheel alignment
Replace worn components as necessary
- Replace suspension bushings
- Inspect and lubricate control arm joints
- Check adaptive damping system functionality
Use only Audi-approved parts
- Replace shock absorbers
- Replace suspension mounts
- Inspect and replace springs if necessary
Perform full suspension overhaul
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What type of suspension system does the 2010-2016 Audi RS5 use?
What type of suspension system does the 2010-2016 Audi RS5 use?
The 2010-2016 Audi RS5 features a sport-tuned adaptive air suspension system with dynamic ride control (DRC). This system includes electronically controlled dampers that adjust stiffness based on driving conditions, offering a balance between comfort and performance. The front suspension uses a five-link design, while the rear employs a trapezoidal-link setup.
Q2 What is the ground clearance of the Audi RS5 with the standard suspension?
What is the ground clearance of the Audi RS5 with the standard suspension?
The ground clearance of the 2010-2016 Audi RS5 with the standard suspension is approximately 120 mm (4.7 inches). This measurement can vary slightly depending on the suspension mode selected (Comfort, Auto, or Dynamic) and the load on the vehicle.
Q3 Can the suspension height be adjusted on the Audi RS5?
Can the suspension height be adjusted on the Audi RS5?
Yes, the Audi RS5's adaptive air suspension allows for height adjustment. The system can lower the vehicle by up to 20 mm (0.8 inches) in Dynamic mode for improved aerodynamics and handling. Additionally, the suspension can be raised by 20 mm for increased ground clearance in rough terrain or when driving at low speeds.
Q4 What is the recommended tire pressure for the Audi RS5 to ensure optimal suspension performance?
What is the recommended tire pressure for the Audi RS5 to ensure optimal suspension performance?
The recommended tire pressure for the 2010-2016 Audi RS5 is 2.4 bar (35 psi) for the front tires and 2.2 bar (32 psi) for the rear tires under normal driving conditions. These values may vary depending on load, speed, and driving conditions. Always refer to the tire pressure label located on the driver's side door jamb for specific recommendations.
Q5 How often should the suspension components be inspected on the Audi RS5?
How often should the suspension components be inspected on the Audi RS5?
Audi recommends inspecting the suspension components, including bushings, dampers, and control arms, every 15,000 miles or annually, whichever comes first. More frequent inspections may be necessary if the vehicle is driven in harsh conditions or on uneven surfaces.
Q6 What is the maximum load capacity for the Audi RS5 without compromising suspension performance?
What is the maximum load capacity for the Audi RS5 without compromising suspension performance?
The maximum load capacity for the 2010-2016 Audi RS5 is 475 kg (1,047 lbs), including passengers and cargo. Exceeding this limit can compromise suspension performance, handling, and safety. Always distribute weight evenly and avoid overloading the vehicle.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi RS5 Suspension System Overview
Coming SoonA detailed guide explaining the adaptive air suspension system, its components, and functionality in the 2010-2016 Audi RS5.
Suspension Maintenance Checklist
Coming SoonA step-by-step checklist for inspecting and maintaining the suspension system of the Audi RS5 to ensure optimal performance and longevity.
Dynamic Ride Control (DRC) Technical Manual
Coming SoonAn in-depth technical manual covering the operation, calibration, and troubleshooting of the DRC system in the Audi RS5.
Genuine Audi Suspension Parts Catalog
Coming SoonA catalog of genuine Audi suspension components, including part numbers and compatibility information for the 2010-2016 RS5.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.