Audi Audi RS5 2010-2016

Audi Audi RS5 2010-2016 HVAC Specifications

Detailed technical specifications and operational guide for the HVAC system in the 2010-2016 Audi RS5. Learn about system components, refrigerant types, control mechanisms, and diagnostic procedures.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the HVAC specifications for the 2010-2016 Audi RS5, including key features, measurements, and technical details. This section provides detailed insights into the heating, ventilation, and air conditioning system, ensuring optimal performance and comfort.

How to Use

Use the search function to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'.

Navigate through the HVAC documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.

Key Specifications

Refrigerant Capacity

650 ± 25 g

Cooling Capacity

4.2 kW at 35°C

Heating Capacity

5.5 kW at 90°C

Airflow Rate

Up to 900 m³/h

Filter Replacement Interval

15,000 miles or 12 months

Available Specifications

HVAC System Overview

This section provides an overview of the HVAC system, including its components, functionality, and integration with the vehicle's electronics.

System Components

Dual-zone automatic climate control system
Electrically driven compressor with variable displacement
High-capacity blower motor with adjustable speed
Integrated air quality sensor for automatic recirculation
Refrigerant type: R134a

System Integration

Fully integrated with the Audi MMI (Multi Media Interface)
Supports automatic temperature adjustment based on sunlight sensor
Linked to the vehicle's CAN bus for real-time data exchange
Includes rear seat ventilation ducts for passenger comfort

Note: The HVAC system is designed to work seamlessly with the vehicle's electronics, ensuring optimal performance and energy efficiency.

Heating and Cooling Performance

This section details the heating and cooling capabilities of the HVAC system, including temperature ranges, airflow rates, and efficiency metrics.

Heating Performance

Heating capacity: 5.5 kW at 90°C coolant temperature
Rapid heat-up time: 5 minutes to reach 20°C cabin temperature
Integrated auxiliary heater for cold weather conditions
Heater core material: Aluminum with high thermal conductivity

Cooling Performance

Cooling capacity: 4.2 kW at 35°C ambient temperature
Airflow rate: Up to 900 m³/h at maximum blower speed
Evaporator temperature range: 2°C to 10°C
Refrigerant capacity: 650 ± 25 g

Note: The cooling system is optimized for rapid temperature reduction, even in high ambient temperatures.

Air Distribution and Filtration

This section covers the air distribution system, including ductwork, vents, and the air filtration system, ensuring clean and efficient airflow.

Air Distribution

Multi-level air distribution with adjustable vents
Dual-zone control for driver and front passenger
Rear seat ventilation ducts with adjustable flow
Defrost vents optimized for rapid windshield clearing

Air Filtration

High-efficiency particulate air (HEPA) filter
Activated carbon filter for odor reduction
Filter replacement interval: 15,000 miles or 12 months
Automatic recirculation mode based on air quality sensor

Note: The air filtration system ensures a clean and comfortable cabin environment, even in polluted urban areas.

Control and Diagnostics

This section explains the control mechanisms and diagnostic features of the HVAC system, including user interfaces and fault detection.

Control Mechanisms

Touchscreen controls integrated into the Audi MMI
Voice command support for hands-free operation
Steering wheel-mounted controls for temperature adjustment
Programmable climate presets for personalized comfort

Diagnostic Features

On-board diagnostics (OBD) for fault detection
Real-time monitoring of refrigerant pressure and temperature
Error codes stored in the vehicle's ECU for troubleshooting
Self-diagnostic mode accessible via the MMI interface

Note: The diagnostic system provides detailed feedback on system performance, enabling quick identification and resolution of issues.

Search Specifications

Search by specification name, value, or description

Component Specifications

General Specifications

System Type: Automatic Climate Control

Refrigerant Type: R134a

Refrigerant Capacity: 525 ± 25 g

Compressor Type: Variable Displacement

Compressor Oil Type: PAG 46

Compressor Oil Capacity: 150 ± 10 ml

Blower Motor

Power Rating: 200 W

Voltage: 12 V

Speed Settings

Low
Medium
High
Auto

Part Number: 8T1820011A

Heating System

Heater Core Material: Aluminum

Heater Core Dimensions: 300 x 150 x 30 mm

Max Heater Output: 7.5 kW

Coolant Flow Rate: 12 L/min

Part Number: 8T1811011B

Cooling System

Evaporator Material: Aluminum

Evaporator Dimensions: 250 x 200 x 50 mm

Max Cooling Output: 5.0 kW

Condenser Material: Aluminum

Condenser Dimensions: 400 x 300 x 20 mm

Part Number: 8T1820101C

Air Distribution

Vent Types

Dashboard Vents
Floor Vents
Defrost Vents

Airflow Capacity: 600 m³/h

Recirculation Mode: Automatic and Manual

Part Number: 8T1820031D

Temperature Control

Temperature Range: 16°C to 30°C

Sensor Accuracy: ±0.5°C

Control Type: Electronic Thermostat

Part Number: 8T1820041E

Filters

Cabin Filter Type: Particle and Activated Carbon

Cabin Filter Dimensions: 200 x 150 x 25 mm

Replacement interval: 15,000 miles or 12 months

Part Number: 8T1820051F

Operational Parameters

Operating Temperature Range: -30°C to 50°C

Max System Pressure: 30 bar

Min System Pressure: 2 bar

Compressor Cutoff Temperature: 120°C

Diagnostics

Diagnostic interface: OBD-II

Fault Codes

B10A1
B10A2
B10A3

Self Diagnosis Mode: Yes

Diagnostic Tool: VAS 5054A

Maintenance

Refrigerant Replacement interval: Every 2 years or 24,000 miles

Compressor Oil Replacement interval: Every 4 years or 48,000 miles

System Leak Check interval: Every 12 months

Part Number: 8T1820061G

Service Information Service

Detailed service requirements and schedules for the HVAC system

15,000

Replace cabin air filter
Check refrigerant level
Inspect compressor belt

Ensure all connections are secure and free of leaks

30,000

Replace refrigerant
Inspect evaporator and condenser
Check blower motor operation

Use only manufacturer-approved refrigerant and oil

60,000

Replace compressor oil
Inspect all hoses and connections
Perform full system diagnostic

Ensure all components are within specified tolerances

Frequently Asked Questions

Find answers to common questions about torque specifications

What is the refrigerant type and capacity for the 2010-2016 Audi RS5 HVAC system?

The 2010-2016 Audi RS5 HVAC system uses R134a refrigerant. The total system capacity is approximately 525 grams (18.5 ounces). Always refer to the vehicle's service manual for precise specifications.

How do I reset the HVAC system after replacing the cabin air filter?

To reset the HVAC system, turn the ignition on but do not start the engine. Set the HVAC controls to the 'Auto' mode, then press and hold the 'Recirculation' and 'Airflow Up' buttons simultaneously for 5 seconds. The system will reset and recalibrate.

What is the recommended interval for servicing the HVAC system?

Audi recommends inspecting the HVAC system every 20,000 miles or 24 months, whichever comes first. This includes checking refrigerant levels, cabin air filter replacement, and inspecting for leaks or blockages in the system.

How do I diagnose a malfunctioning HVAC blower motor?

If the blower motor is malfunctioning, check the fuse (usually located in the fuse box under the dashboard) and the blower motor resistor. Use a multimeter to test for continuity and proper voltage. If the motor does not respond, it may need replacement. Refer to the service manual for detailed diagnostic steps.

What are the common symptoms of a failing HVAC compressor?

Common symptoms include reduced cooling performance, unusual noises (such as grinding or squealing), and visible refrigerant leaks. If the compressor clutch fails to engage, it may indicate an electrical issue or low refrigerant levels. Professional diagnosis is recommended.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi RS5 HVAC System Service Manual

Coming Soon

Official service manual for the 2010-2016 Audi RS5 HVAC system, including detailed repair procedures and specifications.

HVAC Refrigerant Charging Guide

Coming Soon

Step-by-step guide for safely charging the HVAC system with R134a refrigerant, including pressure specifications and safety precautions.

Cabin Air Filter Replacement Tutorial

Coming Soon

Detailed instructions for replacing the cabin air filter in the 2010-2016 Audi RS5, including tools required and reset procedures.

HVAC Diagnostic Trouble Codes (DTCs)

Coming Soon

Comprehensive list of HVAC-related diagnostic trouble codes for the Audi RS5, including explanations and troubleshooting tips.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.