Audi Audi RS5 2010-2016

Audi Audi RS5 2010-2016 Fuel System Specifications

Comprehensive technical guide for the 2010-2016 Audi RS5 fuel system, including fuel type requirements, pressure specifications, injector flow rates, and maintenance tips.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the fuel specifications for the 2010-2016 Audi RS5, including key features, measurements, and technical details

How to Use

Use the search function to locate specific fuel specifications by entering keywords such as 'octane rating', 'fuel capacity', or 'emission standards'.

Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each section is labeled with a clear title for easy reference.

Key Specifications

Octane Rating

91 (RON 95) minimum

Fuel Tank Capacity

64 liters (16.9 gallons)

Fuel Pump Pressure

5.8 bar (84 psi)

CO2 Emissions

229 g/km

Combined Fuel Consumption

10.5 L/100 km (22.4 mpg)

Available Specifications

Fuel Requirements

Details on the type of fuel required for optimal performance and compliance with emission standards

Recommended Fuel Type

Premium unleaded gasoline with a minimum octane rating of 91 (RON 95)
Do not use gasoline with a methanol content exceeding 10%
Ethanol blends up to E10 (10% ethanol) are acceptable
Avoid using diesel or kerosene as they can cause severe engine damage

Fuel Additives

Use only Audi-approved fuel additives
Avoid additives containing metal compounds (e.g., lead, manganese)
Additives should not exceed 0.15% by volume
Consult the owner's manual for a list of approved additives

Note: Using unapproved additives may void the vehicle's warranty.

Fuel System Specifications

Technical details about the fuel system, including capacity, pressure, and components

Fuel Tank Capacity

Total fuel tank capacity: 64 liters (16.9 gallons)
Reserve fuel capacity: 8 liters (2.1 gallons)
Fuel tank material: High-density polyethylene (HDPE)
Fuel tank design: Dual-chamber for improved safety and efficiency

Fuel Delivery System

Direct fuel injection system with multi-hole injectors
Fuel pump pressure: 5.8 bar (84 psi)
Fuel filter replacement interval: Every 60,000 km (37,282 miles)
Fuel lines made of reinforced nylon for durability

Emission Standards and Efficiency

Information on the vehicle's compliance with emission regulations and fuel efficiency metrics

Emission Compliance

Complies with Euro 5 emission standards
Equipped with a catalytic converter and oxygen sensors
CO2 emissions: 229 g/km
NOx emissions: 0.03 g/km

Fuel Efficiency

Combined fuel consumption: 10.5 L/100 km (22.4 mpg)
Urban fuel consumption: 14.2 L/100 km (16.6 mpg)
Highway fuel consumption: 8.1 L/100 km (29.0 mpg)
Idle fuel consumption: 0.8 L/hour

Note: Fuel efficiency may vary based on driving conditions and maintenance.

Search Specifications

Search by specification name, value, or description

Component Specifications

Fuel Type

Recommended Fuel: Premium unleaded gasoline (95 RON or higher)

Minimum Octane Rating: 91 RON

Ethanol Content: Maximum 10% (E10)

Alternative Fuels: Not compatible with diesel, LPG, or CNG

Fuel Tank

Capacity: 64 liters

Material: High-density polyethylene (HDPE)

Part Number: 8T0201101A

Pressure Relief Valve: Integrated, 0.3 bar opening pressure

Fuel Pump

Type: Electric in-tank fuel pump

Flow Rate: 120 liters/hour at 5 bar

Operating Pressure: 5 bar

Part Number: 8K0919051B

Voltage: 12V DC

Current Draw: 6.5A max

Fuel injectors

Type: Direct injection (FSI)

Flow Rate: 200 cc/min at 3 bar

Operating Pressure: 40-120 bar

Part Number: 06E906036C

Spray Pattern: Multi-hole, cone-shaped

Fuel Filter

Type: In-line fuel filter

Part Number: 8K0201051C

Replacement interval: Every 60,000 miles or 60 months

Filter Material: Synthetic fiber with water separator

Fuel Pressure Regulator

Type: Mechanical diaphragm

Operating Pressure: 5 bar

Part Number: 06E127025A

Location: Integrated into fuel rail

Fuel Rail

Material: Aluminum alloy

Part Number: 06E133201B

Pressure Sensor: Integrated, 0-150 bar range

Mounting Torque: 10 Nm

Fuel System Cleaning

Recommended interval: Every 30,000 miles

Cleaning Agent: Audi-approved fuel system cleaner

Part Number: G001780A2

Procedure: Add to fuel tank before refueling

Fuel System Diagnostics

Diagnostic Tool: VAS 5054A or equivalent

Error Codes

P0171
P0172
P0087
P0088

Pressure Test: 40-120 bar at idle, 150 bar max under load

Leak Test: Maximum 0.5 bar pressure drop in 10 minutes

Fuel System Safety

Fire Protection: Fuel cut-off inertia switch

Location: Behind rear seat, driver's side

Reset Procedure: Press reset button after impact

Warning Labels: Flammable liquid, no smoking

Service Information Service

Detailed service requirements and schedules for the fuel system

30,000 miles

30 months

Inspect fuel lines for leaks
Check fuel filter condition
Add fuel system cleaner

Use only Audi-approved cleaning agents

60,000 miles

60 months

Replace fuel filter
Inspect fuel pump operation
Check fuel injector spray pattern

Perform fuel pressure test if issues are suspected

120,000 miles

120 months

Replace fuel pump
Inspect fuel tank for damage
Clean fuel injectors

Use specialized equipment for injector cleaning

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of fuel is recommended for the 2010-2016 Audi RS5?

The 2010-2016 Audi RS5 requires premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher. Using lower octane fuel may result in reduced performance and potential engine knocking.

Can I use ethanol-blended fuel in the Audi RS5?

The Audi RS5 is compatible with ethanol-blended fuels containing up to 10% ethanol (E10). Using fuels with higher ethanol content (e.g., E15 or E85) is not recommended as it may cause damage to the fuel system and void the warranty.

What is the fuel tank capacity of the Audi RS5?

The fuel tank capacity of the 2010-2016 Audi RS5 is 64 liters (16.9 gallons). This provides a balance between range and performance for the vehicle.

What is the fuel consumption of the Audi RS5?

The Audi RS5 has an average fuel consumption of approximately 10.5 liters per 100 kilometers (22.4 mpg) in combined driving conditions. Actual consumption may vary based on driving style, road conditions, and other factors.

Does the Audi RS5 require any fuel additives?

No, the Audi RS5 does not require any fuel additives under normal operating conditions. The engine is designed to operate efficiently with premium unleaded gasoline. Using unauthorized additives may harm the fuel system and void the warranty.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi RS5 Owner's Manual

Coming Soon

The official owner's manual provides detailed information on fuel requirements, maintenance schedules, and safety precautions specific to the Audi RS5.

Audi Fuel System Maintenance Guide

Coming Soon

A comprehensive guide on maintaining the fuel system, including tips for optimal performance and longevity.

Audi Warranty and Service Information

Coming Soon

Detailed information on warranty coverage, service requirements, and the importance of using genuine Audi parts.

Audi Technical Service Bulletins

Coming Soon

Access to technical service bulletins related to the fuel system and other components of the Audi RS5.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.