Audi Audi RS4 2012-2015 DQ500 Transmission Specifications
Comprehensive technical specifications for the DQ500 7-speed dual-clutch transmission used in the 2012-2015 Audi RS4. This document covers gear ratios, torque capacity, fluid specifications, shift logic, and maintenance procedures specific to the DQ500 transmission system.
Overview Specifications
Comprehensive description of the dq500-transmission specifications for the 2012-2015 Audi RS4, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dq500-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or the sidebar menu. Each section is labeled with its respective topic for easy access.
Key Specifications
Transmission Type
7-speed dual-clutch
Torque Capacity
600 Nm (442 lb-ft)
Fluid Capacity
7.2 liters (1.9 gallons)
Shift Time (Sport Mode)
0.2 seconds
Weight
98.5 kg (217 lbs)
Available Specifications
Transmission Design and Construction
Details about the design, materials, and construction of the dq500-transmission
Transmission Design and Construction
Details about the design, materials, and construction of the dq500-transmission
Transmission Housing
- Constructed from high-strength aluminum alloy
- Weight: 98.5 kg (217 lbs)
- Designed for optimal heat dissipation
- Integrated mounting points for engine and drivetrain components
Gear Set Configuration
- 7-speed dual-clutch system
- Helical-cut gears for reduced noise and vibration
- Gear pitch diameter: 72 mm
- Precision-machined gear teeth for durability
- Note: Gear ratios optimized for high-performance driving
Performance Specifications
Technical details about the performance capabilities of the dq500-transmission
Performance Specifications
Technical details about the performance capabilities of the dq500-transmission
Torque Capacity
- Maximum torque capacity: 600 Nm (442 lb-ft)
- Designed to handle high-performance engine outputs
- Torque distribution: 40:60 front-to-rear bias
- Note: Torque capacity verified under dynamic load testing
Shift Times
- Shift time in Sport mode: 0.2 seconds
- Shift time in Comfort mode: 0.4 seconds
- Adaptive shift logic for varying driving conditions
- Note: Shift times measured under controlled conditions
Fluid and Cooling System
Information about the transmission fluid requirements and cooling system
Fluid and Cooling System
Information about the transmission fluid requirements and cooling system
Transmission Fluid
- Recommended fluid: Audi Genuine DCTF 1
- Fluid capacity: 7.2 liters (1.9 gallons)
- Fluid change interval: 60,000 km (37,282 miles)
- Note: Use only approved fluids to ensure optimal performance
Cooling System
- Integrated oil-to-water heat exchanger
- Coolant flow rate: 12 liters per minute
- Operating temperature range: -40°C to 150°C (-40°F to 302°F)
- Note: Cooling system designed for high-performance applications
Electronics and Control Systems
Details about the electronic control units and software for the dq500-transmission
Electronics and Control Systems
Details about the electronic control units and software for the dq500-transmission
Transmission Control Unit (TCU)
- 32-bit microprocessor for real-time control
- Integrated CAN bus communication
- Adaptive shift mapping based on driving style
- Note: TCU firmware updates available via Audi dealerships
Sensors and Actuators
- 12 integrated sensors for monitoring transmission parameters
- Hydraulic actuators for precise clutch control
- Operating voltage: 12V DC
- Note: Sensors are self-diagnostic and report faults via OBD-II
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 7-speed dual-clutch automatic
- Manufacturer
- Audi AG
- Part Number
- 0GC300046
- Application
- 2012-2015 Audi RS4
- Production Years
- 2012-2015
Dimensions And Weight
- Length
- 680 mm
- Width
- 450 mm
- Height
- 350 mm
- Weight
- 95 kg
Gear Ratios
- 1st Gear
- 3.50:1
- 2nd Gear
- 2.04:1
- 3rd Gear
- 1.42:1
- 4th Gear
- 1.07:1
- 5th Gear
- 0.85:1
- 6th Gear
- 0.69:1
- 7th Gear
- 0.57:1
- Reverse Gear
- 3.89:1
Torque Capacity
- Maximum Torque
- 600 Nm
- Recommended Torque
- 550 Nm
- Torque Limiter
- Integrated in clutch system
Clutch System
- Type
- Dual wet multi-plate clutch
- Clutch Pack Part Number
- 0GC398021
- Clutch Fluid Capacity
- 1.2 liters
- Clutch Fluid Type
- G 052 182 A2
Oil Specifications
- Oil Type
- G 052 529 A2
- Oil Capacity
- 7.2 liters
- Oil Change interval
- 60,000 miles or 60 months
- Oil Viscosity
- SAE 75W-90
Operational Parameters
- Maximum input Speed
- 8,000 rpm
- Maximum Output Speed
- 7,500 rpm
- Operating Temperature Range
- -40°C to 150°C
- Shift Response Time
- 200 ms
Cooling System
- Coolant Type
- G 013 A8J1G
- Coolant Capacity
- 1.5 liters
- Cooling Method
- Integrated oil cooler
- Coolant Change interval
- 120,000 miles or 120 months
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Codes
-
- P0700
- P0715
- P0720
- P0730
- Diagnostic Tool
- VAS 5054A
- Self Diagnosis
- Supported
Maintenance Specifications
- Filter Part Number
- 0GC325429
- Filter Change interval
- 40,000 miles or 48 months
- Seal Part Number
- 0GC321115
- Seal Replacement interval
- 100,000 miles or 120 months
- inspection Interval
- 20,000 miles or 24 months
Service Information Service
Detailed service requirements and schedules for the DQ500 transmission
- Inspect transmission for leaks
- Check transmission fluid level
- Inspect clutch system
Perform visual and functional checks
- Replace transmission filter
- Change transmission fluid
- Inspect cooling system
Use only Audi-approved fluids and parts
- Replace clutch fluid
- Inspect and adjust clutch system
- Perform diagnostic scan
Ensure proper clutch engagement and disengagement
- Replace transmission seals
- Inspect and replace worn components
- Perform full diagnostic check
Replace seals even if no leaks are detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ500 transmission in the 2012-2015 Audi RS4?
What is the torque capacity of the DQ500 transmission in the 2012-2015 Audi RS4?
The DQ500 transmission in the 2012-2015 Audi RS4 has a torque capacity of up to 600 Nm (442 lb-ft). This makes it suitable for high-performance applications, ensuring durability under heavy load conditions.
Q2 What type of fluid is recommended for the DQ500 transmission in the Audi RS4?
What type of fluid is recommended for the DQ500 transmission in the Audi RS4?
Audi recommends using genuine VW/Audi dual-clutch transmission fluid (part number G 052 529 A2) for the DQ500 transmission. The fluid capacity is approximately 7.2 liters (7.6 quarts), but always refer to the service manual for exact specifications.
Q3 How often should the DQ500 transmission fluid be changed in the Audi RS4?
How often should the DQ500 transmission fluid be changed in the Audi RS4?
Audi does not specify a fixed interval for DQ500 transmission fluid changes under normal driving conditions. However, for high-performance or severe driving conditions, it is recommended to inspect the fluid every 60,000 miles (100,000 km) and replace it if necessary.
Q4 What is the gear ratio configuration for the DQ500 transmission in the Audi RS4?
What is the gear ratio configuration for the DQ500 transmission in the Audi RS4?
The DQ500 transmission in the Audi RS4 features a 7-speed dual-clutch configuration with the following gear ratios: 1st gear - 3.50:1, 2nd gear - 2.18:1, 3rd gear - 1.52:1, 4th gear - 1.14:1, 5th gear - 0.89:1, 6th gear - 0.71:1, 7th gear - 0.58:1. The final drive ratio is 3.68:1.
Q5 Can the DQ500 transmission handle modifications or increased power output?
Can the DQ500 transmission handle modifications or increased power output?
The DQ500 transmission is robust and can handle moderate power increases, but significant modifications (e.g., tuning beyond 650 Nm of torque) may require upgraded clutch packs or other internal components. Always consult a professional tuner or Audi specialist before making modifications.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ500 Transmission Service Manual
Coming SoonOfficial service manual for the DQ500 transmission, including detailed maintenance procedures, torque specifications, and troubleshooting guides.
Audi RS4 Owner's Manual Supplement
Coming SoonSupplemental guide for Audi RS4 owners, covering transmission operation, maintenance tips, and warranty information.
DQ500 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing the transmission fluid in the DQ500, including tools required and safety precautions.
Audi Genuine Parts Catalog
Coming SoonCatalog of genuine Audi parts for the DQ500 transmission, including fluid, seals, and clutch components.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.