Audi Audi RS4 2012-2015 Brakes Specifications
Explore the detailed technical specifications for the 2012-2015 Audi RS4 braking system, including brake disc dimensions, pad materials, caliper configurations, and hydraulic system details. Ideal for maintenance, repair, and performance upgrades.
Overview Specifications
Comprehensive description of the brakes specifications for the 2012-2015 Audi RS4, including key features, measurements, and technical details
How to Use
Use the search function to locate specific brake specifications by entering keywords such as 'brake disc diameter', 'pad material', or 'caliper type'.
Navigate through the brakes documentation by selecting the relevant section from the table of contents or using the sidebar menu to jump to specific subsections.
Key Specifications
Front Brake Disc Diameter
365 mm
Rear Brake Disc Diameter
324 mm
Brake Fluid Type
DOT 4
100-0 km/h Braking Distance
34 meters
Brake Pad Thickness (Front)
12 mm (new)
Available Specifications
Front Brake System
Detailed information about the front brake system, including disc size, caliper type, and pad specifications
Front Brake System
Detailed information about the front brake system, including disc size, caliper type, and pad specifications
Brake Disc Specifications
- Front brake disc diameter: 365 mm
- Front brake disc thickness: 34 mm
- Ventilated and cross-drilled design for improved cooling
- Material: High-carbon cast iron with anti-corrosion coating
Caliper and Pad Details
- 8-piston fixed calipers for enhanced braking performance
- Caliper material: Aluminum alloy for reduced weight
- Brake pad material: High-performance ceramic composite
- Pad thickness: 12 mm (new), 3 mm (minimum wear limit)
Note: Ensure proper bedding-in procedure for new brake pads to avoid uneven wear.
Rear Brake System
Technical details of the rear brake system, including disc dimensions, caliper configuration, and pad specifications
Rear Brake System
Technical details of the rear brake system, including disc dimensions, caliper configuration, and pad specifications
Brake Disc Specifications
- Rear brake disc diameter: 324 mm
- Rear brake disc thickness: 22 mm
- Ventilated design for efficient heat dissipation
- Material: High-carbon cast iron with anti-corrosion coating
Caliper and Pad Details
- Single-piston floating calipers for rear braking
- Caliper material: Aluminum alloy
- Brake pad material: Low-metallic compound for reduced noise
- Pad thickness: 10 mm (new), 2 mm (minimum wear limit)
Brake Fluid and Hydraulics
Information about the brake fluid type, hydraulic system, and maintenance requirements
Brake Fluid and Hydraulics
Information about the brake fluid type, hydraulic system, and maintenance requirements
Brake Fluid Specifications
- Recommended brake fluid: DOT 4
- Minimum boiling point: 230°C (dry), 155°C (wet)
- Fluid capacity: 1.0 liter (total system)
- Replace fluid every 2 years or 30,000 miles
Hydraulic System Details
- Dual-circuit hydraulic system with diagonal split
- ABS (Anti-lock Braking System) integrated
- Electronic Brakeforce Distribution (EBD) for optimal braking force
- Brake booster type: Vacuum-assisted
Note: Always use manufacturer-recommended brake fluid to maintain system integrity.
Brake Performance and Testing
Performance metrics and testing standards for the Audi RS4 braking system
Brake Performance and Testing
Performance metrics and testing standards for the Audi RS4 braking system
Performance Metrics
- 100-0 km/h braking distance: 34 meters
- Maximum deceleration: 1.2 g
- Brake fade resistance tested at 300°C
- Pedal force required for full braking: 50 N
Testing Standards
- Complies with ECE R90 braking standards
- Tested for high-speed stability up to 250 km/h
- Cold weather performance tested at -30°C
- Wet braking performance tested under simulated rain conditions
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Brakes Specifications
Brake Type
- Front Brakes
- Ventilated disc brakes
- Rear Brakes
- Ventilated disc brakes
- Parking Brake
- Electromechanical parking brake
Brake Discs
- Front Disc Diameter
- 365 mm
- Front Disc Thickness
- 34 mm
- Rear Disc Diameter
- 324 mm
- Rear Disc Thickness
- 22 mm
- Material
- Cast iron with aluminum hat
- Part Number Front
- 8T0615301M
- Part Number Rear
- 8T0615601K
Brake Pads
- Front Pad Thickness New
- 18 mm
- Front Pad Thickness Wear Limit
- 3 mm
- Rear Pad Thickness New
- 14 mm
- Rear Pad Thickness Wear Limit
- 2 mm
- Material
- Ceramic composite
- Part Number Front
- 8K0698151E
- Part Number Rear
- 8K0698451B
Brake Calipers
- Front Caliper Type
- Fixed 6-piston aluminum caliper
- Rear Caliper Type
- Floating single-piston aluminum caliper
- Front Caliper Part Number
- 8T0615123A
- Rear Caliper Part Number
- 8T0615423B
Brake Fluid
- Type
- DOT 4
- Capacity
- 1.0 liter
- Replacement interval
- Every 2 years or 30,000 miles
- Specification
- ISO 4925 Class 6
Brake System Pressure
- Normal Operating Pressure
- 100-120 bar
- Maximum Pressure
- 200 bar
- Pressure Tolerance
- +/- 5 bar
Brake Booster
- Type
- Vacuum-assisted hydraulic booster
- Part Number
- 8K1610105A
- Operating Pressure
- 0.8-1.0 bar
Brake Wear Sensors
- Front Sensor Part Number
- 8K0927461
- Rear Sensor Part Number
- 8K0927462
- Resistance New
- 0.5-1.5 ohms
- Resistance Worn
- > 10 ohms
Brake System Diagnostics
- Fault Codes
-
- C101D - Brake Pressure Sensor Fault
- C101E - Brake Booster Pressure Sensor Fault
- C102A - ABS Pump Motor Fault
- Diagnostic Tool
- VAS 5054A or equivalent
- Test Procedures
-
- Check brake pressure sensor readings
- Inspect ABS pump motor operation
- Verify brake booster vacuum levels
Brake System Limits
- Maximum Operating Temperature
- 600°C
- Minimum Operating Temperature
- -40°C
- Maximum Deceleration
- 1.2 g
- Maximum Pedal Force
- 500 N
Service Information Service
Detailed service requirements and schedules for the brake system
- Inspect brake pad thickness
- Check brake fluid level
- Inspect brake discs for wear and damage
Replace brake fluid every 2 years or 30,000 miles
- Replace brake fluid
- Inspect brake calipers for proper operation
- Check brake wear sensor functionality
Ensure all brake components are free of corrosion
- Replace brake pads if necessary
- Inspect and replace brake discs if below minimum thickness
- Check brake booster vacuum system
Use only Audi-approved brake components
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the brake rotor size for the 2012-2015 Audi RS4?
What is the brake rotor size for the 2012-2015 Audi RS4?
The 2012-2015 Audi RS4 is equipped with ventilated and perforated brake rotors. The front rotors measure 365 mm in diameter and 34 mm in thickness, while the rear rotors measure 324 mm in diameter and 22 mm in thickness. These dimensions are critical for ensuring proper brake performance and compatibility.
Q2 What type of brake pads are recommended for the Audi RS4?
What type of brake pads are recommended for the Audi RS4?
Audi recommends using high-performance ceramic brake pads for the RS4. These pads are designed to handle the vehicle's high-speed capabilities and provide consistent braking performance under extreme conditions. Genuine Audi brake pads (part number 8W0698151M for front and 8W0698451M for rear) are recommended for optimal performance and warranty compliance.
Q3 How often should the brake fluid be replaced on the Audi RS4?
How often should the brake fluid be replaced on the Audi RS4?
Audi recommends replacing the brake fluid every two years or 30,000 miles, whichever comes first. The RS4 uses DOT 4 brake fluid, which must meet Audi specification VW 501.14. Regular replacement ensures proper brake system function and prevents moisture buildup, which can lead to brake failure.
Q4 What is the recommended brake service interval for the Audi RS4?
What is the recommended brake service interval for the Audi RS4?
Audi recommends inspecting the brake system every 10,000 miles or annually. This includes checking brake pad thickness, rotor condition, and fluid levels. Brake pads should be replaced when they reach a minimum thickness of 3 mm, and rotors should be replaced or resurfaced if they fall below the minimum thickness specifications (front: 32 mm, rear: 20 mm).
Q5 Can I upgrade the brakes on my Audi RS4?
Can I upgrade the brakes on my Audi RS4?
Yes, the Audi RS4 can be upgraded with aftermarket or Audi Sport performance brake systems. However, any modifications must comply with Audi's technical specifications to ensure safety and performance. Upgrading to larger rotors or high-performance calipers may require additional modifications, such as wheel spacers or larger wheels, to accommodate the new components.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi RS4 Brake System Technical Manual
Coming SoonOfficial Audi technical documentation detailing the brake system specifications, maintenance procedures, and troubleshooting for the 2012-2015 RS4.
Brake Pad Replacement Guide
Coming SoonStep-by-step guide for replacing brake pads on the Audi RS4, including torque specifications and safety precautions.
Brake Fluid Flush Procedure
Coming SoonDetailed instructions for performing a brake fluid flush on the Audi RS4, including the use of Audi-approved tools and fluids.
Audi Genuine Parts Catalog
Coming SoonAccess the official Audi parts catalog to find genuine brake components for the 2012-2015 RS4, ensuring compatibility and warranty compliance.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.