Audi Audi RS4 2000-2001

Audi Audi RS4 2000-2001 Body Specifications

Comprehensive guide to the body specifications of the 2000-2001 Audi RS4, detailing structural components, materials, and assembly procedures

Updated Oct 4, 2023

Overview Specifications

Comprehensive description of the body specifications for the 2000-2001 Audi RS4, including key features, measurements, and technical details

How to Use

Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'weight'.

Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy reference.

Key Specifications

Length

4515 mm

Width

1855 mm

Height

1360 mm

Curb Weight

1595 kg

Drag Coefficient

0.34

Available Specifications

Exterior Dimensions

Detailed measurements and specifications for the exterior dimensions of the 2000-2001 Audi RS4

Overall Dimensions

Length: 4515 mm
Width: 1855 mm
Height: 1360 mm
Wheelbase: 2600 mm
Track width (front/rear): 1565 mm / 1545 mm

Weight Distribution

Curb weight: 1595 kg
Front axle weight: 58%
Rear axle weight: 42%
Gross vehicle weight: 2100 kg
Payload capacity: 505 kg

Note: Weight distribution is optimized for balanced handling and performance.

Body Materials

Information on the materials used in the construction of the Audi RS4 body

Chassis Construction

Material: High-strength steel and aluminum
Body type: 4-door sedan
Roof material: Aluminum
Hood material: Aluminum
Trunk lid material: Aluminum

Corrosion Protection

Galvanized steel panels
Multi-layer paint system
Underbody protection coating
Drainage system to prevent water accumulation
12-year anti-corrosion warranty

Aerodynamics

Details on the aerodynamic design and features of the Audi RS4 body

Drag Coefficient

Drag coefficient (Cd): 0.34
Frontal area: 2.2 m²
Rear spoiler: Integrated into the trunk lid
Air intakes: Optimized for cooling and airflow
Underbody: Flat panel design for reduced drag

Aero Features

Active grille shutters
Rear diffuser for improved downforce
Side skirts for reduced turbulence
Aero-optimized mirrors
Windshield wipers with integrated spoilers

Note: Aerodynamic features are designed to enhance stability at high speeds.

Safety Features

Overview of the safety features integrated into the body of the Audi RS4

Crash Protection

Front and rear crumple zones
Side impact protection beams
Reinforced B-pillars
High-strength roof structure
Dual-stage airbags

Pedestrian Safety

Deformable hood structure
Energy-absorbing bumper
Raised front-end design
Soft-touch materials in critical areas
Compliance with Euro NCAP pedestrian safety standards

Search Specifications

Search by specification name, value, or description

Component Specifications

Dimensions

Overall Length: 4507 mm

Overall Width: 1770 mm

Overall Height: 1395 mm

Wheelbase: 2648 mm

Track Front: 1526 mm

Track Rear: 1514 mm

Ground Clearance: 120 mm

Weight

Curb Weight: 1560 kg

Gross Vehicle Weight: 2020 kg

Front Axle Weight: 880 kg

Rear Axle Weight: 680 kg

Payload Capacity: 460 kg

Body Structure

Material: Galvanized steel with aluminum components

Drag Coefficient: 0.34 Cd

Torsional Rigidity: 22000 Nm/deg

Corrosion Warranty: 12 years

Part Numbers: Front Fender: 8D0821105A
Rear Fender: 8D0821106A
Roof Panel: 8D0821107A

Doors

Number Of Doors: 4

Door Material: Galvanized steel with aluminum reinforcements

Door Weight: Front: 32 kg
Rear: 28 kg

Hinge Type: Heavy-duty ball-bearing hinges

Part Numbers: Front Door: 8D0821001A
Rear Door: 8D0821002A

Windows

Front Windshield Thickness: 5.5 mm

Rear Windshield Thickness: 4.5 mm

Side Window Thickness: 3.5 mm

Window Material: Laminated safety glass

Part Numbers: Front Windshield: 8D0820101A
Rear Windshield: 8D0820102A
Side Window: 8D0820103A

Exterior Lighting

Headlight Type: Xenon HID with dynamic leveling

Headlight Output: 3200 lumens

Taillight Type: LED

Fog Light Output: 1200 lumens

Part Numbers: Headlight Assembly: 8D0941001A
Taillight Assembly: 8D0941002A
Fog Light Assembly: 8D0941003A

Aerodynamics

Front Air Dam: Integrated with bumper

Rear Spoiler: Adjustable

Underbody Panels: Full-length

Drag Reduction: 10% compared to standard A4

Part Numbers: Front Air Dam: 8D0807101A
Rear Spoiler: 8D0807102A
Underbody Panel: 8D0807103A

Paint

Base Coat Thickness: 0.02 mm

Clear Coat Thickness: 0.04 mm

Paint Material: Water-based polyurethane

Color Options

Nogaro Blue
Imola Yellow
Silver
Black

Part Numbers: Touch Up Paint: 8D0800001A

Safety Features

Airbags: Front: Dual-stage
Side: Thorax
Curtain: Full-length

Crumple Zones: Front: Designed for 40 mph impact
Rear: Designed for 30 mph impact

Seatbelt Pretensioners: Front and rear

Part Numbers: Front Airbag: 8D0880201A
Side Airbag: 8D0880202A
Curtain Airbag: 8D0880203A

Maintenance

Body Wash interval: Every 2 weeks

Wax Application interval: Every 3 months

Rust Protection interval: Annually

inspection Points

Door hinges
Window seals
Underbody panels

Part Numbers: Rust Protection Spray: 8D0800002A

Service Information Service

Detailed service requirements and schedules for the body system

10000

Inspect door hinges and lubricate if necessary
Check window seals for wear and tear
Inspect underbody panels for damage

Ensure all body panels are free from corrosion

30000

Apply rust protection spray
Inspect and adjust rear spoiler
Check and clean exterior lighting

Replace any damaged or worn-out components

60000

Inspect and replace door seals if necessary
Check and tighten all body fasteners
Inspect and repair any paint damage

Ensure all safety features are functioning correctly

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the dimensions of the 2000-2001 Audi RS4 body?

The 2000-2001 Audi RS4 has a length of 4515 mm, a width of 1830 mm (excluding mirrors), and a height of 1395 mm. The wheelbase is 2605 mm, and the track width is 1540 mm at the front and 1520 mm at the rear.

What materials are used in the construction of the RS4 body?

The body of the 2000-2001 Audi RS4 is constructed using a combination of high-strength steel and aluminum. The hood and front fenders are made of aluminum to reduce weight, while the rest of the body structure uses galvanized steel for durability and crash protection.

What is the drag coefficient of the RS4 body?

The 2000-2001 Audi RS4 has a drag coefficient (Cd) of 0.34, which is optimized for aerodynamic efficiency. This contributes to improved fuel efficiency and high-speed stability.

How much does the RS4 body weigh?

The curb weight of the 2000-2001 Audi RS4 is approximately 1595 kg (3517 lbs). This includes the weight of the body, chassis, and all standard equipment.

What are the ground clearance and approach/departure angles of the RS4?

The ground clearance of the 2000-2001 Audi RS4 is 120 mm. The approach angle is 15 degrees, and the departure angle is 16 degrees, making it suitable for most road conditions but not designed for off-road use.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi RS4 Body Repair Manual

Coming Soon

Official repair manual for the 2000-2001 Audi RS4 body, covering structural repairs, panel replacement, and corrosion protection.

Audi RS4 Body Specifications Sheet

Coming Soon

Detailed technical specifications for the RS4 body, including dimensions, materials, and weight distribution.

Audi RS4 Aerodynamics Guide

Coming Soon

Guide to the aerodynamic design of the RS4 body, including drag coefficient and airflow optimization.

Audi RS4 Body Maintenance Checklist

Coming Soon

Step-by-step checklist for maintaining the RS4 body, including cleaning, rust prevention, and inspection procedures.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.