Audi Audi RS3 2017-present Body Specifications
Detailed technical specifications and documentation for the body system of the 2017-Present Audi RS3, including structural components, exterior dimensions, materials, and aerodynamics.
Overview Specifications
Comprehensive description of the body specifications for the 2017-Present Audi RS3, including key features, measurements, and technical details
How to Use
Use the search bar to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4479 mm
Width
1802 mm
Height
1399 mm
Curb Weight
1520 kg
Drag Coefficient
0.30
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the Audi RS3's exterior dimensions, including length, width, height, and wheelbase.
Exterior Dimensions
Detailed measurements and specifications of the Audi RS3's exterior dimensions, including length, width, height, and wheelbase.
Overall Dimensions
- Length: 4479 mm
- Width: 1802 mm (excluding mirrors)
- Height: 1399 mm
- Wheelbase: 2628 mm
- Track width (front/rear): 1555 mm / 1524 mm
Ground Clearance and Weight
- Ground clearance: 120 mm
- Curb weight: 1520 kg
- Gross vehicle weight: 1990 kg
- Payload capacity: 470 kg
Note: Ground clearance may vary slightly depending on suspension settings.
Body Materials and Construction
Information on the materials used in the construction of the Audi RS3's body, including lightweight components and structural integrity.
Body Materials and Construction
Information on the materials used in the construction of the Audi RS3's body, including lightweight components and structural integrity.
Material Composition
- High-strength steel used in the chassis
- Aluminum components in the hood and doors
- Carbon fiber reinforced polymer (CFRP) in select areas
- Multi-material construction for optimal weight distribution
Structural Features
- Quattro all-wheel drive system integration
- Reinforced crash structures for safety
- Aerodynamic underbody panels
- Lightweight roof design
Note: The use of lightweight materials contributes to improved performance and fuel efficiency.
Aerodynamics
Details on the aerodynamic design of the Audi RS3, including drag coefficient and airflow management.
Aerodynamics
Details on the aerodynamic design of the Audi RS3, including drag coefficient and airflow management.
Drag Coefficient
- Drag coefficient (Cd): 0.30
- Front spoiler with integrated air intakes
- Rear diffuser for improved airflow
- Aerodynamically optimized side mirrors
Airflow Management
- Active grille shutters for reduced drag
- Air curtains integrated into the front bumper
- Rear spoiler for increased downforce
- Ventilated wheel arches for cooling
Note: Aerodynamic features are designed to enhance stability at high speeds.
Exterior Features
Overview of the exterior features and design elements of the Audi RS3, including lighting and styling.
Exterior Features
Overview of the exterior features and design elements of the Audi RS3, including lighting and styling.
Lighting
- Full LED headlights with dynamic turn signals
- LED daytime running lights
- LED rear lights with dynamic indicators
- Optional Matrix LED headlights
Styling Elements
- RS-specific honeycomb grille
- Dual oval exhaust tips
- Flared wheel arches
- Optional carbon fiber exterior package
Note: Styling elements are designed to emphasize the sporty character of the RS3.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4310 mm
- Overall Width
- 1800 mm
- Overall Height
- 1410 mm
- Wheelbase
- 2630 mm
- Track Width Front
- 1554 mm
- Track Width Rear
- 1521 mm
- Ground Clearance
- 120 mm
Weight
- Curb Weight
- 1525 kg
- Gross Vehicle Weight
- 2020 kg
- Payload Capacity
- 495 kg
- Front Axle Load
- 860 kg
- Rear Axle Load
- 665 kg
Body Materials
- Material Type
- Aluminum and high-strength steel
- Front Fenders
- Aluminum
- Hood
- Aluminum
- Doors
- High-strength steel
- Roof
- High-strength steel
- Trunk Lid
- Aluminum
Aerodynamics
- Drag Coefficient
- 0.32 Cd
- Frontal Area
- 2.2 m²
- Downforce Front
- 45 kg at 200 km/h
- Downforce Rear
- 55 kg at 200 km/h
Exterior Lighting
- Headlights
- Type: LED MatrixPart Number: 8V0941005ALuminous Flux: 1200 lumensBeam Range: 300 meters
- Taillights
- Type: LEDPart Number: 8V0945095BLuminous Flux: 600 lumens
- Fog Lights
- Type: LEDPart Number: 8V0941699ALuminous Flux: 400 lumens
Windows And Mirrors
- Windshield
- Thickness: 5.5 mmMaterial: Laminated glassPart Number: 8V1845101A
- Side Windows
- Thickness: 4.0 mmMaterial: Tempered glassPart Number: 8V1845102B
- Rear Window
- Thickness: 5.0 mmMaterial: Tempered glassPart Number: 8V1845103C
- Side Mirrors
- Type: Electrically adjustable and heatedPart Number: 8V1857525DDimensions: 150 x 80 mm
Doors
- Front Doors
- Material: High-strength steelHinge Type: Integrated hingePart Number: 8V1837011E
- Rear Doors
- Material: High-strength steelHinge Type: Integrated hingePart Number: 8V1837012F
- Door Seals
- Material: EPDM rubberPart Number: 8V1837399G
Roof
- Material
- High-strength steel
- Thickness
- 1.2 mm
- Part Number
- 8V1871001H
- Sunroof
- Type: PanoramicPart Number: 8V1871002JDimensions: 800 x 500 mm
Trunk
- Capacity
- 340 liters
- Opening Width
- 1000 mm
- Opening Height
- 500 mm
- Trunk Lid Material
- Aluminum
- Part Number
- 8V1827101K
Safety Features
- Airbags
- Front Airbags: Dual-stageSide Airbags: Thorax and headCurtain Airbags: Full-lengthPart Numbers: Front Airbag: 8V0880201L, Side Airbag: 8V0880202M, Curtain Airbag: 8V0880203N
- Crumple Zones
- Front: High-strength steelRear: High-strength steelSide: Reinforced steel
- Seatbelt Pretensioners
- Front: PyrotechnicRear: MechanicalPart Numbers: Front Pretensioner: 8V0857757P, Rear Pretensioner: 8V0857758Q
Service Information Service
Detailed service requirements and schedules for the Audi RS3 body components
- Inspect body panels for damage
- Check door seals and hinges
- Lubricate door hinges and locks
- Inspect windshield and windows for cracks
Ensure all body components are free from corrosion and damage
- Check and adjust headlight alignment
- Inspect and clean exterior lighting
- Check and replace worn door seals
- Inspect and lubricate sunroof mechanism
Replace any damaged or worn components to maintain optimal performance
- Inspect and replace windshield wipers
- Check and replace side mirror components if necessary
- Inspect and replace trunk lid struts
- Check and replace any damaged body panels
Perform a thorough inspection of all body components and replace as needed
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2017-Present Audi RS3?
What are the exterior dimensions of the 2017-Present Audi RS3?
The 2017-Present Audi RS3 has an overall length of 4469 mm, a width of 1877 mm (excluding mirrors), and a height of 1415 mm. The wheelbase measures 2628 mm, and the track width is 1555 mm at the front and 1523 mm at the rear.
Q2 What materials are used in the construction of the Audi RS3 body?
What materials are used in the construction of the Audi RS3 body?
The Audi RS3 body utilizes a combination of high-strength steel, aluminum, and composite materials. The hood and front fenders are made of aluminum to reduce weight, while the roof is available in aluminum or optional carbon fiber for enhanced performance and rigidity.
Q3 What is the drag coefficient of the Audi RS3?
What is the drag coefficient of the Audi RS3?
The Audi RS3 has a drag coefficient (Cd) of 0.30, which is optimized for aerodynamic efficiency. This is achieved through features such as a flat underbody, rear diffuser, and carefully designed air intakes.
Q4 What is the weight distribution of the Audi RS3?
What is the weight distribution of the Audi RS3?
The Audi RS3 has a near-perfect weight distribution of 58:42 (front:rear), which enhances handling and stability. This is achieved through the placement of the engine and drivetrain components.
Q5 What is the ground clearance of the Audi RS3?
What is the ground clearance of the Audi RS3?
The Audi RS3 has a ground clearance of approximately 120 mm, which is designed to balance performance and everyday usability. This can vary slightly depending on the suspension setup and optional configurations.
Q6 Are there any specific maintenance requirements for the Audi RS3 body?
Are there any specific maintenance requirements for the Audi RS3 body?
Regular maintenance includes inspecting and cleaning the body seams, checking for corrosion, and ensuring proper alignment of panels. Audi recommends using only genuine parts and following the service intervals outlined in the owner's manual to maintain structural integrity and warranty coverage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi RS3 Body Repair Manual
Coming SoonOfficial repair manual for the Audi RS3 body, covering panel alignment, corrosion prevention, and structural repairs.
Audi RS3 Aerodynamics Guide
Coming SoonDetailed guide on the aerodynamic features of the Audi RS3, including airflow management and performance optimization.
Audi RS3 Body Material Specifications
Coming SoonTechnical document outlining the materials used in the construction of the Audi RS3 body and their properties.
Audi RS3 Paint and Finish Care Guide
Coming SoonComprehensive guide on maintaining the paint and finish of the Audi RS3, including cleaning techniques and protective measures.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.