Audi Audi RS3 2011-2016

Audi Audi RS3 2011-2016 Drivetrain Specifications

Detailed technical specifications and documentation for the drivetrain system of the 2011-2016 Audi RS3. Learn about the engine, transmission, quattro all-wheel drive, differentials, and more.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the drivetrain specifications for the 2011-2016 Audi RS3, including key features, measurements, and technical details. This section covers the engine, transmission, all-wheel-drive system, and differentials, providing in-depth technical insights for service and maintenance.

How to Use

Use the search function to locate specific drivetrain components or specifications by entering keywords such as 'transmission', 'engine torque', or 'differential ratio'.

Navigate through the drivetrain documentation by selecting the relevant section from the table of contents or using the sidebar menu for quick access to specific components.

Key Specifications

Engine Power

340 hp (250 kW)

Torque

450 Nm (332 lb-ft)

0-100 km/h

4.6 seconds

Transmission

7-speed S tronic

Fuel Efficiency

8.5 L/100 km (27.7 mpg)

Available Specifications

Engine and Transmission

This section details the engine and transmission specifications, including power output, torque, and gear ratios.

Engine Specifications

2.5L TFSI inline-5 cylinder engine
Power output: 340 hp (250 kW) at 5400-6500 rpm
Torque: 450 Nm (332 lb-ft) at 1600-5300 rpm
Compression ratio: 10.0:1
Bore x Stroke: 82.5 mm x 92.8 mm

Transmission Specifications

7-speed S tronic dual-clutch transmission
Gear ratios: 1st - 3.73:1, 2nd - 2.05:1, 3rd - 1.41:1, 4th - 1.07:1, 5th - 0.85:1, 6th - 0.69:1, 7th - 0.56:1
Final drive ratio: 4.25:1
Maximum engine speed: 6800 rpm
Shift times: < 0.2 seconds in dynamic mode

Note: The S tronic transmission features launch control for optimal acceleration.

All-Wheel-Drive System

This section covers the quattro all-wheel-drive system, including its components and performance characteristics.

quattro System Overview

Haldex fifth-generation all-wheel-drive system
Torque distribution: Up to 50% to the rear axle
Electronically controlled multi-plate clutch
Preemptive torque distribution based on driving conditions
Weight: 78 kg (172 lbs)

Performance Characteristics

0-100 km/h (0-62 mph) acceleration: 4.6 seconds
Top speed: 250 km/h (155 mph) (electronically limited)
Lateral acceleration: 1.1 g
Braking distance (100-0 km/h): 34.5 meters
Fuel efficiency: 8.5 L/100 km (27.7 mpg) combined

Note: The quattro system enhances traction and stability in all driving conditions.

Differentials

This section provides details on the front and rear differentials, including their design and functionality.

Front Differential

Open differential with electronic differential lock (EDL)
EDL activates during wheel slip to redistribute torque
Maximum torque transfer: 2500 Nm
Weight: 22 kg (48.5 lbs)
Lubrication: Synthetic gear oil (75W-90)

Rear Differential

Electronically controlled multi-plate clutch
Torque vectoring for improved cornering
Maximum torque transfer: 1800 Nm
Weight: 18 kg (39.7 lbs)
Lubrication: Synthetic gear oil (75W-90)

Note: The rear differential works in conjunction with the quattro system for optimal handling.

Driveshafts and Axles

This section covers the driveshafts and axles, including their dimensions and materials.

Driveshaft Specifications

Material: High-strength steel
Diameter: 80 mm
Length: 1200 mm (front), 950 mm (rear)
Weight: 12 kg (26.5 lbs) per shaft
Maximum torque capacity: 3000 Nm

Axle Specifications

Material: Forged aluminum
Spline count: 32 (front), 28 (rear)
Length: 650 mm (front), 700 mm (rear)
Weight: 8 kg (17.6 lbs) per axle
Maximum angle: 45 degrees

Note: The axles are designed to handle high torque loads while minimizing weight.

Search Specifications

Search by specification name, value, or description

Component Specifications

Engine

Type: 2.5L TFSI inline-5 turbocharged

Displacement: 2480 cc

Compression Ratio: 10.0:1

Max Power: 340 hp @ 5400-6500 rpm

Max Torque: 450 Nm @ 1600-5300 rpm

Fuel System: Direct injection

Part Number: 07K907404

Transmission

Type: 7-speed S tronic dual-clutch automatic

Gear Ratios: 1st: 3.46:1
2nd: 2.15:1
3rd: 1.46:1
4th: 1.07:1
5th: 0.84:1
6th: 0.67:1
7th: 0.56:1
Reverse: 3.40:1

Final Drive Ratio: 4.25:1

Part Number: 0BH300051

All Wheel Drive System

Type: quattro with Haldex clutch

Torque Distribution: Front: 50%
Rear: 50%

Part Number: 0AY907554

Operational Limits: Max Torque Transfer: 450 Nm
Temperature Limit: 120°C

Differential

Front: Type: Open differential
Part Number: 0AW409151

Rear: Type: Electronic differential lock (EDL)
Part Number: 0AW409152

Driveshafts

Front: Material: Forged steel
Length: 720 mm
Part Number: 8K0407271

Rear: Material: Forged steel
Length: 680 mm
Part Number: 8K0407272

Clutch

Type: Dual wet clutch

Friction Material: Sintered metal

Operational Limits: Max Torque: 450 Nm
Temperature Limit: 250°C

Part Number: 0BH198141

Propeller Shaft

Material: Aluminum

Length: 1200 mm

Diameter: 80 mm

Part Number: 8K0407273

Transfer Case

Type: Haldex multi-plate clutch

Lubrication: Synthetic oil

Oil Capacity: 0.9 liters

Part Number: 0AY907554

Axles

Front: Type: Independent, MacPherson strut
Part Number: 8K0407151

Rear: Type: Independent, multi-link
Part Number: 8K0407152

Maintenance

Transmission Fluid: Type: G 052 529 A2
Capacity: 7.2 liters
Change interval: 60,000 miles

Transfer Case Fluid: Type: G 055 175 A2
Capacity: 0.9 liters
Change interval: 40,000 miles

Differential Fluid: Type: G 052 145 S2
Capacity: 1.2 liters
Change interval: 60,000 miles

Service Information Service

Detailed service requirements and schedules for the 2011-2016 Audi RS3 drivetrain

10,000

Inspect drivetrain components for wear and damage
Check transmission fluid level
Inspect driveshafts and CV joints

Regular inspection is crucial for maintaining drivetrain performance

40,000

Replace transfer case fluid
Inspect and lubricate propeller shaft
Check differential fluid level

Fluid changes are essential for long-term reliability

60,000

Replace transmission fluid
Replace differential fluid
Inspect clutch system

Major service interval for drivetrain components

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of drivetrain does the 2011-2016 Audi RS3 use?

The 2011-2016 Audi RS3 features a quattro all-wheel-drive (AWD) system with a Haldex multi-plate clutch. This system provides dynamic torque distribution between the front and rear axles, enhancing traction and stability.

What is the torque split in the Audi RS3's quattro system?

The quattro system in the Audi RS3 typically operates with a default torque split of 100% to the front wheels under normal conditions. However, it can distribute up to 50% of the torque to the rear wheels when additional traction is required, such as during hard acceleration or low-grip scenarios.

What type of transmission is used in the Audi RS3?

The 2011-2016 Audi RS3 is equipped with a 7-speed S tronic dual-clutch automatic transmission. This transmission provides rapid gear changes and is optimized for performance, with a focus on both efficiency and driving dynamics.

What is the maximum torque capacity of the Audi RS3's drivetrain?

The drivetrain of the Audi RS3 is designed to handle a maximum torque output of 450 Nm (332 lb-ft), which is the peak torque produced by the 2.5-liter TFSI inline-5 engine.

How often should the Haldex clutch fluid be replaced?

Audi recommends replacing the Haldex clutch fluid every 30,000 miles (48,000 km) or every 3 years, whichever comes first. This ensures optimal performance and longevity of the all-wheel-drive system.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

Audi RS3 Drivetrain Maintenance Guide

Coming Soon

A detailed guide on maintaining the quattro all-wheel-drive system, including fluid changes, inspections, and common troubleshooting tips.

Haldex Clutch System Overview

Coming Soon

An in-depth explanation of the Haldex multi-plate clutch system used in the Audi RS3, including its operation and maintenance requirements.

S tronic Transmission Service Manual

Coming Soon

Official service procedures for the 7-speed S tronic dual-clutch transmission, including fluid replacement and diagnostic steps.

Audi RS3 Drivetrain Specifications

Coming Soon

Comprehensive technical specifications for the Audi RS3's drivetrain, including torque capacity, gear ratios, and system components.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.