Audi Audi RS3 2011-2016 DQ500 Transmission Specifications
Comprehensive technical specifications for the DQ500 7-speed dual-clutch transmission used in the 2011-2016 Audi RS3. This document covers gear ratios, torque capacity, fluid specifications, shift logic, and maintenance procedures specific to the DQ500 transmission system.
Overview Specifications
Comprehensive description of the dq500-transmission specifications for the 2011-2016 Audi RS3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dq500-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or the sidebar menu. Each section is organized by major topics such as 'Transmission Design', 'Performance Specifications', and 'Maintenance Requirements'.
Key Specifications
Maximum Torque Capacity
600 Nm (442 lb-ft)
Transmission Fluid Capacity
7.2 liters (7.6 quarts)
Gear Ratios
7-speed, 3.50:1 to 0.60:1
Fluid Change Interval
60,000 miles or 5 years
Operating Temperature Range
-40°C to 150°C (-40°F to 302°F)
Available Specifications
Transmission Design
Detailed overview of the dq500-transmission's design, including its architecture, components, and construction
Transmission Design
Detailed overview of the dq500-transmission's design, including its architecture, components, and construction
Architecture and Layout
- 7-speed dual-clutch automatic transmission
- Longitudinal mounting for quattro all-wheel-drive systems
- Modular design with integrated mechatronics unit
- Compact construction for improved weight distribution
Key Components
- Dual wet clutches for enhanced durability and heat dissipation
- Hydraulic actuation system for precise gear shifts
- Integrated oil pump for efficient lubrication and cooling
- High-strength alloy casing for reduced weight and increased rigidity
Note: The dual wet clutches are designed to handle high torque loads, making them ideal for high-performance applications.
Performance Specifications
Technical details about the dq500-transmission's performance capabilities, including torque handling, gear ratios, and shift times
Performance Specifications
Technical details about the dq500-transmission's performance capabilities, including torque handling, gear ratios, and shift times
Torque and Power Handling
- Maximum torque capacity: 600 Nm (442 lb-ft)
- Designed for engines producing up to 400 hp
- Optimized for high-performance driving conditions
- Enhanced cooling system for sustained high loads
Gear Ratios
- 1st gear: 3.50:1
- 2nd gear: 2.18:1
- 3rd gear: 1.52:1
- 4th gear: 1.14:1
- 5th gear: 0.89:1
- 6th gear: 0.72:1
- 7th gear: 0.60:1
- Reverse gear: 3.89:1
Note: The gear ratios are optimized for both performance and fuel efficiency.
Maintenance Requirements
Guidelines and specifications for maintaining the dq500-transmission, including fluid capacity, service intervals, and inspection points
Maintenance Requirements
Guidelines and specifications for maintaining the dq500-transmission, including fluid capacity, service intervals, and inspection points
Fluid Specifications
- Transmission fluid capacity: 7.2 liters (7.6 quarts)
- Recommended fluid: Audi Genuine Dual Clutch Transmission Fluid
- Fluid change interval: Every 60,000 miles or 5 years
- Fluid operating temperature range: -40°C to 150°C (-40°F to 302°F)
Service and Inspection
- Regular inspection of clutch wear and hydraulic system pressure
- Diagnostic scan for fault codes using Audi-specific tools
- Check for leaks and fluid contamination during service intervals
- Replace mechatronics unit seals every 100,000 miles
Note: Proper maintenance is critical to ensure the longevity and performance of the transmission.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 7-speed dual-clutch automatic
- Manufacturer
- Audi AG
- Model Year Range
- 2011-2016
- Vehicle Model
- Audi RS3
- Part Number
- 0BH300050Q
- Weight
- 94 kg (207.2 lbs)
- Fluid Type
- Audi Genuine Dual Clutch Transmission Fluid (G 052 529 A2)
Gear Ratios
- 1st Gear
- 3.50:1
- 2nd Gear
- 2.18:1
- 3rd Gear
- 1.52:1
- 4th Gear
- 1.14:1
- 5th Gear
- 0.89:1
- 6th Gear
- 0.72:1
- 7th Gear
- 0.60:1
- Reverse Gear
- 3.89:1
Torque Capacity
- Maximum Torque
- 600 Nm (442.5 lb-ft)
- Operational Torque Range
- 200-600 Nm (147.5-442.5 lb-ft)
- Torque Converter Lockup
- Yes, with dynamic lockup control
Clutch System
- Clutch Type
- Dual wet multi-plate clutch
- Clutch Pack Material
- Sintered bronze
- Clutch Fluid Volume
- 1.2 liters (1.27 quarts)
- Clutch Actuation
- Electro-hydraulic
- Clutch Wear Limit
- 0.5 mm (0.02 in)
Hydraulic System
- Pump Type
- Electrically driven vane pump
- Operating Pressure
- 20-25 bar (290-362 psi)
- Fluid Capacity
- 7.2 liters (7.6 quarts)
- Filter Type
- Replaceable paper filter
- Filter Part Number
- 0BH325429
Electronic Control
- Control Module
- Mechatronic unit integrated into transmission
- Control Module Part Number
- 0BH927770D
- Sensors
-
- Input speed sensor
- Output speed sensor
- Temperature sensor
- Pressure sensor
- Communication Protocol
- CAN bus
Operational Parameters
- Maximum input Speed
- 8000 rpm
- Maximum Output Speed
- 7000 rpm
- Operating Temperature Range
- -40°C to 150°C (-40°F to 302°F)
- Shift Time
- 200-300 milliseconds
Maintenance Specifications
- Fluid Change interval
- 60,000 miles or 60 months
- Filter Change interval
- 60,000 miles or 60 months
- Clutch inspection Interval
- 30,000 miles or 30 months
- Seal inspection Interval
- 60,000 miles or 60 months
- Fluid Specification
- Audi G 052 529 A2
Diagnostic Specifications
- Diagnostic Tool
- VAS 5054A or equivalent
- Fault Codes
-
- P0700 - Transmission Control System Malfunction
- P0715 - Input/Turbine Speed Sensor Circuit Malfunction
- P0720 - Output Speed Sensor Circuit Malfunction
- P0730 - Incorrect Gear Ratio
- Diagnostic Procedures
-
- Check for stored fault codes
- Inspect wiring and connectors
- Perform adaptation of clutch and gear engagement
Safety information
- Warning
- Always disconnect the battery before servicing the transmission
- Fluid Handling
- Use only Audi-approved transmission fluid
- Temperature Caution
- Avoid operating the transmission at temperatures above 150°C (302°F)
- Pressure Caution
- Do not exceed 25 bar (362 psi) during pressure testing
Service Information Service
Detailed service requirements and schedules for the DQ500 transmission
- Inspect clutch system for wear
- Check transmission fluid level
- Inspect seals for leaks
Perform clutch adaptation if necessary
- Replace transmission fluid
- Replace transmission filter
- Inspect hydraulic system for leaks
Use only Audi-approved transmission fluid
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ500 transmission in the 2011-2016 Audi RS3?
What is the torque capacity of the DQ500 transmission in the 2011-2016 Audi RS3?
The DQ500 transmission in the 2011-2016 Audi RS3 has a torque capacity of up to 600 Nm (442 lb-ft). This makes it suitable for high-performance applications, including the 2.5-liter TFSI engine in the RS3.
Q2 What type of gear oil is recommended for the DQ500 transmission?
What type of gear oil is recommended for the DQ500 transmission?
Audi recommends using genuine VW/Audi G 052 182 A2 gear oil for the DQ500 transmission. The transmission requires approximately 7.2 liters of oil for a complete fill. Always refer to the official service manual for precise specifications.
Q3 How often should the DQ500 transmission fluid be changed?
How often should the DQ500 transmission fluid be changed?
Audi recommends changing the transmission fluid every 60,000 miles (96,000 km) or every 6 years, whichever comes first. However, for high-performance or heavy-duty use, more frequent intervals may be necessary.
Q4 What is the shift pattern of the DQ500 transmission?
What is the shift pattern of the DQ500 transmission?
The DQ500 transmission is a 7-speed dual-clutch transmission (DSG) with a sequential shift pattern. It features both automatic and manual modes, with paddle shifters available for manual control.
Q5 Can the DQ500 transmission handle tuning or increased power outputs?
Can the DQ500 transmission handle tuning or increased power outputs?
Yes, the DQ500 transmission is robust and can handle moderate tuning. However, for significant power increases beyond 600 Nm, upgrading the clutch packs and other internal components may be necessary to ensure reliability.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ500 Transmission Service Manual
Coming SoonOfficial service manual for the DQ500 transmission, including detailed maintenance procedures, torque specifications, and troubleshooting guides.
DQ500 Transmission Fluid Replacement Guide
Coming SoonStep-by-step guide for replacing the transmission fluid in the DQ500, including tools required and safety precautions.
Audi RS3 Performance Tuning and Transmission Upgrades
Coming SoonTechnical resource on tuning the Audi RS3 and upgrading the DQ500 transmission for increased performance.
DQ500 Transmission Diagnostic Codes
Coming SoonComprehensive list of diagnostic trouble codes (DTCs) specific to the DQ500 transmission and their meanings.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.