Audi Audi RS3 2011-2016 2.5L Engine Specifications
Detailed technical specifications and documentation for the 2.5L TFSI inline-5 turbocharged engine in the 2011-2016 Audi RS3. Includes performance data, system overviews, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 2.5l-engine specifications for the 2011-2016 Audi RS3, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 2.5l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
2480 cc (2.5 liters)
Power Output
367 hp (270 kW)
Torque
465 Nm (343 lb-ft)
Compression Ratio
10.0:1
Fuel System
Direct Injection
Available Specifications
Engine Design and Architecture
Details about the design, layout, and architecture of the 2.5l-engine
Engine Design and Architecture
Details about the design, layout, and architecture of the 2.5l-engine
Inline-5 Cylinder Configuration
- Inline-5 cylinder layout with turbocharging
- Aluminum alloy engine block and cylinder head
- DOHC (Dual Overhead Camshaft) design
- 20-valve configuration with variable valve timing
Turbocharging System
- Single turbocharger with intercooler
- Maximum boost pressure of 1.2 bar (17.4 psi)
- Direct fuel injection system
- Turbocharger integrated into the exhaust manifold
Note: The turbocharger is designed for quick spool-up and minimal lag.
Performance Specifications
Technical details about the engine's performance metrics
Performance Specifications
Technical details about the engine's performance metrics
Power and Torque Output
- Maximum power output of 367 hp (270 kW) at 5500-6800 rpm
- Peak torque of 465 Nm (343 lb-ft) at 1625-5500 rpm
- Redline at 6800 rpm
- 0-100 km/h (0-62 mph) acceleration in 4.3 seconds
Fuel Efficiency and Emissions
- Combined fuel consumption of 8.1 L/100 km (29 mpg)
- CO2 emissions of 189 g/km
- Euro 5 emissions standard compliance
- Start-stop system for improved fuel efficiency
Dimensions and Weight
Physical measurements and weight specifications of the 2.5l-engine
Dimensions and Weight
Physical measurements and weight specifications of the 2.5l-engine
Engine Dimensions
- Length: 570 mm (22.4 in)
- Width: 680 mm (26.8 in)
- Height: 640 mm (25.2 in)
- Displacement: 2480 cc (2.5 liters)
Weight Distribution
- Dry weight of 183 kg (403 lbs)
- Weight distribution optimized for front-wheel-drive bias
- Aluminum components reduce overall weight
- Compact design for improved packaging
Note: The lightweight design contributes to the vehicle's agile handling.
Cooling and Lubrication
Details about the engine's cooling and lubrication systems
Cooling and Lubrication
Details about the engine's cooling and lubrication systems
Cooling System
- Liquid-cooled system with electric water pump
- Dual-circuit cooling for engine and turbocharger
- Radiator size: 600 mm x 400 mm (23.6 in x 15.7 in)
- Coolant capacity: 8.5 liters (2.25 gallons)
Lubrication System
- Wet sump lubrication system
- Oil capacity: 6.3 liters (6.7 quarts)
- Oil pump with variable displacement
- Recommended oil grade: 5W-40 synthetic
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- DAZA
- Displacement
- 2.5 liters
- Configuration
- Inline 5-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline (95 RON minimum)
- Manufacturer
- Audi AG
- Production Years
- 2011-2016
Performance
- Power Output
- 367 hp @ 5500-6800 rpm
- Torque
- 465 Nm @ 1625-5550 rpm
- Compression Ratio
- 10.0:1
- Redline
- 7000 rpm
- Top Speed
- 250 km/h (electronically limited)
- Acceleration 0-100 Kmh
- 4.3 seconds
Dimensions
- Bore
- 82.5 mm
- Stroke
- 92.8 mm
- Cylinder Spacing
- 88 mm
- Engine Length
- 520 mm
- Engine Width
- 680 mm
- Engine Height
- 640 mm
- Weight
- 183 kg
Fuel System
- injection Type
- Direct fuel injection (FSI)
- Fuel Pressure
- 150 bar
- injector Part Number
- 06H906036F
- Fuel Pump Part Number
- 8K0919051H
- Fuel Filter Part Number
- 8K0201511M
Turbocharger
- Type
- Single turbocharger with intercooler
- Turbo Model
- KKK K04
- Boost Pressure
- 1.2 bar
- Wastegate Actuator Part Number
- 06H145710A
- intercooler Part Number
- 8P0145803B
Cooling System
- Coolant Capacity
- 8.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Part Number
- 8P0121251H
- Water Pump Part Number
- 06H121011H
- Coolant Type
- G12++ or G13
Lubrication System
- Oil Capacity
- 6.3 liters (with filter)
- Oil Type
- VW 502 00 / 504 00
- Oil Filter Part Number
- 06E115562B
- Oil Pump Part Number
- 06F115105A
- Oil Pressure
- 3.0-4.5 bar at 2000 rpm
Ignition System
- Spark Plug Part Number
- 06H905601B
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
- Recommended Spark Plug Change interval
- 60,000 km
Emissions
- Emission Standard
- EURO 5
- Catalytic Converter Part Number
- 8P0254105A
- Oxygen Sensor Part Number
- 06A906262B
- EGR System
- Not applicable (turbocharged engine)
- Particulate Filter
- Not equipped
Maintenance
- Service intervals
- Oil Change: 15,000 km or 12 monthsAir Filter Change: 30,000 km or 24 monthsSpark Plug Change: 60,000 kmTiming Belt Change: Not applicable (timing chain)Coolant Change: Every 5 years
- Tolerances
- Cylinder Compression: 12-14 bar (max difference 1 bar between cylinders)Valve Clearance: Hydraulic lifters (self-adjusting)Timing Chain Stretch Limit: Max 5% elongation
Diagnostics
- OBD interface
- ISO 15765-4 CAN
- Fault Code Readout
- Via VCDS or compatible OBD-II scanner
- Common Fault Codes
-
- P0300 - Random/Multiple Cylinder Misfire Detected
- P0299 - Turbocharger Underboost
- P0171 - System Too Lean (Bank 1)
- Diagnostic Notes
- Requires Audi-specific diagnostic tools for advanced troubleshooting
Service Information Service
Detailed service requirements and schedules for the 2.5L TFSI engine
- Engine oil and filter change
- Inspect brake system
- Check tire pressure and condition
Use only VW 502 00 / 504 00 compliant oil
- Replace air filter
- Inspect spark plugs
- Check timing chain tension
Replace air filter earlier if driving in dusty conditions
- Replace spark plugs
- Inspect turbocharger system
- Check coolant concentration
Use only OEM spark plugs for optimal performance
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.5l TFSI engine in the 2011-2016 Audi RS3?
What is the horsepower and torque output of the 2.5l TFSI engine in the 2011-2016 Audi RS3?
The 2.5l TFSI engine in the 2011-2016 Audi RS3 produces 340 horsepower (250 kW) at 5,400-6,500 rpm and 450 Nm (332 lb-ft) of torque at 1,600-5,300 rpm. This inline-5 cylinder engine features turbocharging and direct fuel injection for optimal performance.
Q2 What is the recommended oil type and capacity for the 2.5l TFSI engine?
What is the recommended oil type and capacity for the 2.5l TFSI engine?
Audi recommends using fully synthetic engine oil meeting VW 502 00 or VW 504 00 specifications. The oil capacity is approximately 6.3 liters (6.7 quarts) with a filter change. Always refer to the owner's manual or service documentation for exact specifications.
Q3 What is the service interval for the 2.5l TFSI engine?
What is the service interval for the 2.5l TFSI engine?
The service interval for the 2.5l TFSI engine is typically every 15,000 km (9,300 miles) or 12 months, whichever comes first. This includes oil and filter changes, as well as inspections of critical components such as spark plugs, air filters, and timing belts.
Q4 What type of fuel should be used in the 2.5l TFSI engine?
What type of fuel should be used in the 2.5l TFSI engine?
Audi recommends using premium unleaded gasoline with an octane rating of 98 RON (93 AKI) for optimal performance. Using lower-octane fuel may result in reduced power output and efficiency.
Q5 What is the compression ratio of the 2.5l TFSI engine?
What is the compression ratio of the 2.5l TFSI engine?
The 2.5l TFSI engine has a compression ratio of 10.0:1, which is optimized for turbocharged performance and efficiency.
Q6 What is the redline for the 2.5l TFSI engine?
What is the redline for the 2.5l TFSI engine?
The redline for the 2.5l TFSI engine is 7,000 rpm. Exceeding this limit may cause engine damage and void the warranty.
Q7 What is the recommended coolant type for the 2.5l TFSI engine?
What is the recommended coolant type for the 2.5l TFSI engine?
Audi recommends using G12++ or G13 coolant mixed with distilled water in a 50:50 ratio. This ensures proper cooling and prevents corrosion within the engine's cooling system.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi RS3 2.5l TFSI Engine Technical Specifications
Coming SoonDetailed technical specifications for the 2.5l TFSI engine, including performance metrics, dimensions, and maintenance requirements.
Audi RS3 2.5l TFSI Service Manual
Coming SoonComprehensive service manual covering maintenance procedures, troubleshooting, and repair instructions for the 2.5l TFSI engine.
Audi Genuine Parts Catalog
Coming SoonOfficial catalog of genuine Audi parts for the 2.5l TFSI engine, ensuring compatibility and optimal performance.
Audi RS3 2.5l TFSI Performance Tuning Guide
Coming SoonGuide to safely tuning the 2.5l TFSI engine for increased performance, including ECU remapping and aftermarket upgrades.
Audi RS3 2.5l TFSI Warranty Information
Coming SoonDetailed information on warranty coverage for the 2.5l TFSI engine, including terms, conditions, and exclusions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.