Audi Audi Q7 2015-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L V6 TFSI and TDI engines in the 2015-Present Audi Q7. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2015-Present Audi Q7, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
3.0 liters
Horsepower
333 hp @ 5500 rpm
Torque
325 lb-ft @ 2900 rpm
Fuel Economy
21 mpg combined
Compression Ratio
11.2:1
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum horsepower: 333 hp @ 5500 rpm
- Peak torque: 325 lb-ft @ 2900 rpm
- Compression ratio: 11.2:1
- Redline: 6500 rpm
Acceleration
- 0-60 mph: 5.7 seconds
- Top speed: 155 mph (electronically limited)
- Quarter-mile time: 14.2 seconds
- Engine response time: 0.3 seconds
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design
Technical details about the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Design
Technical details about the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Layout
- V6 configuration with 60-degree bank angle
- Aluminum alloy block and cylinder heads
- Dual overhead camshafts (DOHC)
- Direct fuel injection system
Key Components
- Turbocharger: Twin-scroll design
- Intercooler: Air-to-water type
- Valvetrain: 24-valve setup with variable valve timing
- Exhaust system: Dual exhaust with integrated mufflers
Note: The turbocharger is designed to minimize turbo lag and improve throttle response.
Fuel and Emissions
Information on fuel efficiency, emissions standards, and related systems for the 3.0l-engine.
Fuel and Emissions
Information on fuel efficiency, emissions standards, and related systems for the 3.0l-engine.
Fuel Efficiency
- City fuel economy: 19 mpg
- Highway fuel economy: 25 mpg
- Combined fuel economy: 21 mpg
- Fuel tank capacity: 22.5 gallons
Emissions
- Complies with Euro 6 and EPA Tier 3 emissions standards
- CO2 emissions: 213 g/km
- Exhaust gas recirculation (EGR) system
- Catalytic converter: Three-way design with oxygen sensors
Note: The engine is equipped with a start-stop system to reduce emissions during idle.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Service Intervals
- Oil change: Every 10,000 miles or 12 months
- Spark plug replacement: Every 40,000 miles
- Air filter replacement: Every 20,000 miles
- Timing belt inspection: Every 60,000 miles
Key Procedures
- Use only Audi-approved 5W-40 synthetic oil
- Coolant flush recommended every 50,000 miles
- Turbocharger inspection every 30,000 miles
- Diagnostic scan using Audi-specific tools
Note: Always refer to the owner's manual for specific maintenance requirements and procedures.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- EA839
- Engine Type
- V6 TFSI (Turbo Fuel Stratified Injection)
- Displacement
- 2995 cc
- Configuration
- 60-degree V6
- Aspiration
- Turbocharged
- Fuel System
- Direct Injection
- Manufacturer
- Audi AG
- Part Number
- 07P906018
Performance
- Power Output
- 335 hp @ 5500 rpm
- Torque
- 369 lb-ft @ 1370 rpm
- Compression Ratio
- 11.2:1
- Redline
- 6800 rpm
- Fuel Type
- Premium Unleaded (91+ octane)
Dimensions And Weight
- Engine Length
- 520 mm
- Engine Width
- 720 mm
- Engine Height
- 630 mm
- Dry Weight
- 172 kg
- Oil Capacity
- 7.0 liters
Cooling System
- Coolant Capacity
- 12.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Core Dimensions
- 600 mm x 400 mm x 30 mm
- Coolant Type
- G13 (VW/Audi specification)
- Part Number Thermostat
- 06L121111H
Lubrication System
- Oil Type
- VW 508 00 / 509 00 (0W-20)
- Oil Pressure
- 2.5 - 4.5 bar @ 2000 rpm
- Oil Filter Part Number
- 06L115562B
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK PLFER7A8EG
- Spark Plug Gap
- 0.7 - 0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
Fuel System Specs
- Fuel Pump Pressure
- 5.0 bar
- injector Flow Rate
- 200 cc/min @ 3.0 bar
- Fuel Rail Pressure
- 200 bar
- Part Number Fuel Pump
- 4M0919091B
Emissions
- Emission Standard
- Euro 6d-TEMP
- Catalytic Converter Type
- Three-way catalytic converter
- Part Number Catalytic Converter
- 4M0254105A
- EGR System
- Integrated with turbocharger
Maintenance
- Timing Chain Interval
- Lifetime (inspection every 60000 miles)
- Valve Clearance
- Hydraulic lifters (no adjustment required)
- Belt Drive interval
- 150000 miles or 10 years
- Air Filter Replacement interval
- 30000 miles or 24 months
- Part Number Air Filter
- 4M0129620
Diagnostics
- OBD2 Compliance
- Yes
- Fault Code Readout
- Via VCDS or OBD2 scanner
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Connector Location
- Under dashboard, driver's side
Service Information Service
Detailed service requirements and schedules for the 3.0L TFSI engine
- Oil and oil filter change
- Inspect air filter
- Check coolant level and condition
- Inspect spark plugs
Use only Audi-approved fluids and parts
- Replace air filter
- Inspect timing chain tension
- Check fuel system for leaks
- Inspect exhaust system
Timing chain inspection is critical for long-term reliability
- Replace spark plugs
- Inspect and replace drive belts if necessary
- Check and replace coolant if required
- Inspect turbocharger system
Follow Audi's recommended service procedures for turbocharged engines
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L TFSI engine in the Audi Q7?
What is the horsepower and torque output of the 3.0L TFSI engine in the Audi Q7?
The 3.0L TFSI engine in the 2015-Present Audi Q7 produces 333 horsepower at 5,500-6,500 rpm and 325 lb-ft of torque at 2,900-5,300 rpm. This engine features a supercharger for improved performance and efficiency.
Q2 What type of fuel system does the 3.0L TFSI engine use?
What type of fuel system does the 3.0L TFSI engine use?
The 3.0L TFSI engine utilizes a direct fuel injection system, which precisely delivers fuel into the combustion chamber for optimal performance, fuel efficiency, and reduced emissions.
Q3 What is the recommended oil type and capacity for the 3.0L TFSI engine?
What is the recommended oil type and capacity for the 3.0L TFSI engine?
The 3.0L TFSI engine requires synthetic oil meeting Audi specification VW 502 00 or higher. The oil capacity is approximately 7.5 liters (7.9 quarts), including the oil filter. Always refer to the owner's manual for the exact specification.
Q4 What is the service interval for the 3.0L TFSI engine?
What is the service interval for the 3.0L TFSI engine?
Audi recommends a flexible service interval of up to 15,000 miles or 12 months, whichever comes first, for the 3.0L TFSI engine. However, driving conditions and usage may require more frequent servicing.
Q5 Does the 3.0L TFSI engine require premium fuel?
Does the 3.0L TFSI engine require premium fuel?
Yes, the 3.0L TFSI engine is designed to run on premium unleaded gasoline with an octane rating of 91 or higher. Using lower-octane fuel may result in reduced performance and efficiency.
Q6 What is the engine displacement of the 3.0L TFSI engine?
What is the engine displacement of the 3.0L TFSI engine?
The 3.0L TFSI engine has a displacement of 2,995 cc (3.0 liters), with a bore of 84.5 mm and a stroke of 89.0 mm. It features a V6 configuration with a 90-degree bank angle.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi Q7 3.0L TFSI Engine Maintenance Guide
Coming SoonA detailed guide covering routine maintenance procedures, including oil changes, filter replacements, and inspection schedules for the 3.0L TFSI engine.
Audi Genuine Parts Catalog for 3.0L TFSI Engine
Coming SoonAccess the official Audi parts catalog to find genuine components and accessories for the 3.0L TFSI engine, ensuring optimal performance and reliability.
Audi Q7 3.0L TFSI Technical Specifications
Coming SoonComprehensive technical specifications for the 3.0L TFSI engine, including performance metrics, dimensions, and system details.
Audi Service and Repair Manual for 3.0L TFSI Engine
Coming SoonOfficial service and repair manual for the 3.0L TFSI engine, providing step-by-step instructions for diagnostics, repairs, and component replacements.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.