Audi Audi Q7 2015-present 2.0L Engine Specifications
Detailed technical specifications for the 2.0L TFSI engine in the 2015-Present Audi Q7. Includes performance data, fuel system details, turbocharging specs, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2015-Present Audi Q7, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'fuel system'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Horsepower
252 hp @ 5000-6000 rpm
Torque
273 lb-ft @ 1600-4500 rpm
Fuel Economy
21 mpg (combined)
Oil Capacity
5.7 quarts
Coolant Capacity
10.6 quarts
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency.
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency.
Power Output
- Maximum horsepower: 252 hp @ 5000-6000 rpm
- Peak torque: 273 lb-ft @ 1600-4500 rpm
- Turbocharged inline-4 configuration
- Direct fuel injection system
- Compression ratio: 9.6:1
Fuel Efficiency
- City fuel economy: 19 mpg
- Highway fuel economy: 25 mpg
- Combined fuel economy: 21 mpg
- Fuel tank capacity: 22.5 gallons
- Emissions: Euro 6 compliant
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Dimensions and Weight
Technical details on the physical dimensions and weight of the 2.0l-engine.
Engine Dimensions and Weight
Technical details on the physical dimensions and weight of the 2.0l-engine.
Dimensions
- Engine length: 20.5 inches
- Engine width: 24.8 inches
- Engine height: 22.1 inches
- Bore: 82.5 mm
- Stroke: 92.8 mm
Weight
- Dry weight: 330 lbs
- Wet weight (with fluids): 355 lbs
- Oil capacity: 5.7 quarts
- Coolant capacity: 10.6 quarts
Engine Components
Detailed breakdown of the key components of the 2.0l-engine, including the turbocharger, fuel system, and cooling system.
Engine Components
Detailed breakdown of the key components of the 2.0l-engine, including the turbocharger, fuel system, and cooling system.
Turbocharger
- Single turbocharger with intercooler
- Maximum boost pressure: 18 psi
- Turbo response time: 1.2 seconds
- Turbocharger material: High-grade aluminum alloy
Fuel System
- Direct fuel injection with multi-hole injectors
- Fuel pressure: 2900 psi
- Fuel pump type: High-pressure electric pump
- Fuel filter: Integrated with fuel pump module
Note: Regular maintenance of the fuel system is recommended to ensure optimal performance.
Cooling System
- Liquid-cooled with dual thermostats
- Radiator capacity: 1.5 gallons
- Coolant type: G13 (purple)
- Coolant operating temperature: 90-105°C
Maintenance and Service
Guidelines and specifications for maintaining and servicing the 2.0l-engine.
Maintenance and Service
Guidelines and specifications for maintaining and servicing the 2.0l-engine.
Oil Change
- Recommended oil type: VW 502 00 / 504 00
- Oil change interval: 10,000 miles or 12 months
- Oil filter part number: 06E 115 562
- Oil drain plug torque: 22 lb-ft
Spark Plugs
- Spark plug type: Iridium-tipped
- Gap: 0.028 inches
- Replacement interval: 60,000 miles
- Torque specification: 18 lb-ft
Note: Use only OEM-recommended spark plugs for optimal performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- EA888 Gen 3
- Displacement
- 2.0 liters
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Gasoline
- Manufacturer
- Audi AG
- Production Years
- 2015-Present
Performance
- Max Power
- 252 hp @ 5000-6000 rpm
- Max Torque
- 273 lb-ft @ 1600-4500 rpm
- Compression Ratio
- 9.6:1
- Redline
- 6500 rpm
- Fuel System
- Direct injection
Dimensions
- Bore
- 82.5 mm
- Stroke
- 92.8 mm
- Cylinder Spacing
- 88 mm
- Engine Weight
- 152 kg
- Oil Capacity
- 5.7 liters
Cooling System
- Coolant Capacity
- 7.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Type
- Aluminum cross-flow
- Coolant Type
- G12++ or G13
- Cooling Fan Type
- Electric
Lubrication System
- Oil Type
- VW 502 00 / 504 00
- Oil Pressure
- 2.0-4.5 bar at 2000 rpm
- Oil Filter Part Number
- 06L115562
- Oil Change interval
- 10000 miles or 12 months
- Oil Pump Type
- Internal gear pump
Ignition System
- Spark Plug Type
- NGK PLFER7A8EG
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 06E905115E
- Ignition Timing
- Adjustable via ECU
- Firing Order
- 1-3-4-2
Fuel System
- Fuel Pump Pressure
- 4.0-6.0 bar
- injector Part Number
- 06E906036E
- Fuel Rail Pressure
- 150-200 bar
- Fuel Filter Part Number
- 4M0201511
- Fuel Tank Capacity
- 85 liters
Emissions
- Emission Standard
- Euro 6
- Catalytic Converter Part Number
- 4M0254100
- Oxygen Sensor Part Number
- 06E906262L
- EGR System
- Integrated with turbocharger
- Particulate Filter
- Optional
Maintenance
- Timing Belt Interval
- Not applicable (timing chain)
- Timing Chain Interval
- Lifetime (inspection recommended at 100000 miles)
- Valve Clearance
- Hydraulic lifters (no adjustment needed)
- Air Filter Part Number
- 4M0129620
- Cabin Filter Part Number
- 4M0819439
Diagnostics
- OBD2 Port Location
- Driver's side dashboard
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tool
- VCDS or ODIS
- Sensor References
- Crankshaft Position Sensor: 06E906433CCamshaft Position Sensor: 06E907404A
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Oil and filter change
- Inspect timing chain
- Check coolant level and condition
- Inspect spark plugs
Use only Audi-approved fluids and parts
- Replace air filter
- Replace cabin filter
- Inspect fuel system
- Check ignition system
Perform additional checks if driving in severe conditions
- Replace spark plugs
- Inspect turbocharger system
- Check exhaust system
- Replace coolant
Follow Audi's extended maintenance guidelines
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2015-Present Audi Q7?
What is the horsepower and torque output of the 2.0L engine in the 2015-Present Audi Q7?
The 2.0L TFSI engine in the 2015-Present Audi Q7 produces 248 horsepower at 5,000-6,000 RPM and 273 lb-ft of torque at 1,600-4,500 RPM. This turbocharged inline-4 engine is designed for a balance of performance and efficiency.
Q2 What type of fuel is recommended for the 2.0L engine in the Audi Q7?
What type of fuel is recommended for the 2.0L engine in the Audi Q7?
Audi recommends using premium unleaded gasoline with an octane rating of 91 or higher for optimal performance and fuel efficiency. Using lower-octane fuel may result in reduced power output and increased engine knocking.
Q3 What is the oil capacity and recommended oil type for the 2.0L engine?
What is the oil capacity and recommended oil type for the 2.0L engine?
The 2.0L engine requires approximately 5.7 quarts (5.4 liters) of oil. Audi recommends using VW 502 00 or VW 504 00 certified synthetic oil with a viscosity of 5W-40 or 5W-30, depending on operating conditions.
Q4 What is the service interval for the 2.0L engine in the Audi Q7?
What is the service interval for the 2.0L engine in the Audi Q7?
Audi recommends an oil change and inspection every 10,000 miles or 12 months, whichever comes first. However, service intervals may vary based on driving conditions and should be verified using the vehicle's onboard service reminder system.
Q5 Does the 2.0L engine in the Audi Q7 require a timing belt or chain?
Does the 2.0L engine in the Audi Q7 require a timing belt or chain?
The 2.0L engine uses a timing chain, which is designed to last the lifetime of the engine under normal operating conditions. Regular inspection during service intervals is recommended to ensure proper tension and alignment.
Q6 What is the compression ratio of the 2.0L engine?
What is the compression ratio of the 2.0L engine?
The 2.0L TFSI engine has a compression ratio of 9.6:1, which is optimized for turbocharged performance and fuel efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 2.0L TFSI Engine Technical Overview
Coming SoonDetailed technical specifications and operational guidelines for the 2.0L TFSI engine used in the Audi Q7.
Audi Q7 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2015-Present Audi Q7, including service intervals and recommended procedures.
Audi Genuine Parts Catalog
Coming SoonAccess the official catalog for genuine Audi parts, including engine components for the 2.0L TFSI engine.
Audi Warranty and Service Information
Coming SoonComprehensive guide to Audi's warranty coverage and service requirements for the 2.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.