Audi Audi Q5 2017-present DL382 Transmission Specifications
Detailed technical specifications and operational parameters for the DL382 transmission system used in the 2017-Present Audi Q5. This document covers gear ratios, torque capacities, shift patterns, fluid specifications, maintenance intervals, and diagnostic codes specific to this transmission model.
Overview Specifications
Comprehensive description of the dl382-transmission specifications for the 2017-Present Audi Q5, including key features, measurements, and technical details
How to Use
Use the search function to locate specific dl382-transmission specifications by entering keywords such as 'gear ratios', 'torque capacity', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Transmission Type
7-speed dual-clutch automatic
Torque Capacity
500 Nm (369 lb-ft)
Fluid Capacity
7.2 liters (7.6 quarts)
Shift Time
0.2 seconds
Operating Temperature
-40°C to 150°C (-40°F to 302°F)
Available Specifications
Transmission Design and Architecture
Detailed overview of the dl382-transmission's design, architecture, and key components
Transmission Design and Architecture
Detailed overview of the dl382-transmission's design, architecture, and key components
Transmission Type and Configuration
- 7-speed dual-clutch automatic transmission (S tronic)
- Longitudinal mounting for quattro all-wheel-drive systems
- Modular design with integrated control unit
- Compact and lightweight construction for improved efficiency
Key Components
- Dual wet clutches for smooth gear shifts
- Electrohydraulic actuation system for precise control
- Integrated oil pump for efficient lubrication
- Aluminum transmission housing for weight reduction
Note: The dual wet clutches are designed to handle high torque loads while maintaining durability.
Performance Specifications
Technical details and performance metrics of the dl382-transmission
Performance Specifications
Technical details and performance metrics of the dl382-transmission
Torque Capacity and Gear Ratios
- Maximum torque capacity: 500 Nm (369 lb-ft)
- 1st gear ratio: 4.71:1
- 7th gear ratio: 0.80:1
- Overall gear ratio spread: 5.89
Shift Times and Efficiency
- Shift times as low as 0.2 seconds
- Reduced internal friction for improved fuel efficiency
- Optimized gear spacing for smooth acceleration
- Supports start-stop functionality for reduced emissions
Note: The rapid shift times contribute to enhanced driving dynamics and responsiveness.
Maintenance and Fluid Specifications
Guidelines and specifications for maintaining the dl382-transmission
Maintenance and Fluid Specifications
Guidelines and specifications for maintaining the dl382-transmission
Transmission Fluid Requirements
- Recommended fluid: Audi Genuine Dual Clutch Transmission Fluid
- Fluid capacity: 7.2 liters (7.6 quarts)
- Fluid change interval: Every 60,000 miles or 6 years
- Operating temperature range: -40°C to 150°C (-40°F to 302°F)
Maintenance Procedures
- Use diagnostic tools for system checks and error codes
- Inspect clutch wear and replace if necessary
- Check for leaks and ensure proper fluid levels
- Follow Audi's service schedule for optimal performance
Note: Regular maintenance is critical to ensure the longevity and reliability of the transmission.
Integration with Audi Q5 Systems
Details on how the dl382-transmission integrates with the Audi Q5's drivetrain and electronics
Integration with Audi Q5 Systems
Details on how the dl382-transmission integrates with the Audi Q5's drivetrain and electronics
Drivetrain Compatibility
- Designed for quattro all-wheel-drive systems
- Supports multiple driving modes (Comfort, Dynamic, Offroad)
- Integrated with Audi Drive Select system
- Compatible with hybrid and mild-hybrid powertrains
Electronic Control Systems
- Integrated transmission control unit (TCU)
- Supports predictive shift strategies using navigation data
- Adaptive shift logic for varying driving conditions
- Compatible with Audi's MMI infotainment system
Note: The TCU uses real-time data to optimize gear shifts for performance and efficiency.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 7-speed dual-clutch automatic
- Manufacturer
- Audi AG
- Part Number
- 0CK300050
- Model Years
- 2017-Present
- Compatible Models
-
- Audi Q5
Dimensions And Weight
- Length
- 620 mm
- Width
- 380 mm
- Height
- 400 mm
- Weight
- 86 kg
Gear Ratios
- 1st Gear
- 4.71:1
- 2nd Gear
- 3.14:1
- 3rd Gear
- 2.11:1
- 4th Gear
- 1.67:1
- 5th Gear
- 1.29:1
- 6th Gear
- 1.00:1
- 7th Gear
- 0.84:1
- Reverse Gear
- 3.68:1
Torque Capacity
- Maximum Torque
- 500 Nm
- Recommended Torque
- 400 Nm
Fluid Specifications
- Fluid Type
- Audi Genuine Dual Clutch Transmission Fluid
- Part Number
- G052529A2
- Capacity
- 7.2 liters
- Change interval
- 60,000 miles or 60 months
Operational Parameters
- Maximum Rpm
- 7000 rpm
- Operating Temperature Range
- -40°C to 150°C
- Shift Time
- 200 ms
Tolerances
- Gear Mesh Tolerance
- 0.05 mm
- Clutch Plate Clearance
- 0.8 mm to 1.2 mm
- Fluid Pressure Tolerance
- ±5%
Diagnostic Specifications
- Diagnostic Tool
- VAS 6154
- Error Codes
-
- P0700
- P0730
- P1700
- Diagnostic Procedures
-
- Check transmission fluid level
- Scan for fault codes
- Perform adaptation
Maintenance Specifications
- inspection Intervals
-
- Miles: 10,000, Months: 12, Items: Check transmission fluid level,Inspect for leaks,Check for unusual noises
- Miles: 60,000, Months: 60, Items: Replace transmission fluid,Inspect clutch plates,Perform software update
- Torque Specifications
- Pan Bolts: 12 NmFiller Plug: 45 NmDrain Plug: 45 Nm
Safety information
- Warnings
-
- Do not operate the transmission without proper fluid levels
- Ensure the vehicle is on a level surface when checking fluid levels
- Use only Audi Genuine transmission fluid
- Precautions
-
- Allow the transmission to cool before performing maintenance
- Use proper lifting equipment when working under the vehicle
Service Information Service
Detailed service requirements and schedules for the DL382 transmission
- Check transmission fluid level
- Inspect for leaks
- Check for unusual noises
Regular inspection is crucial for maintaining transmission performance
- Replace transmission fluid
- Inspect clutch plates
- Perform software update
Fluid replacement is necessary to ensure optimal transmission function
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DL382 transmission in the 2017-Present Audi Q5?
What is the torque capacity of the DL382 transmission in the 2017-Present Audi Q5?
The DL382 transmission in the 2017-Present Audi Q5 has a torque capacity of up to 400 Nm (295 lb-ft). This allows it to handle the power output of both 2.0L TFSI and 3.0L TFSI engines efficiently.
Q2 What type of transmission fluid is recommended for the DL382 transmission?
What type of transmission fluid is recommended for the DL382 transmission?
Audi recommends using genuine Audi ATF (Automatic Transmission Fluid) part number G 055 529 A2 for the DL382 transmission. The fluid capacity is approximately 7.5 liters, but always refer to the service manual for exact specifications.
Q3 How often should the DL382 transmission fluid be changed?
How often should the DL382 transmission fluid be changed?
Audi does not specify a fixed interval for transmission fluid changes under normal driving conditions. However, for severe driving conditions (e.g., frequent towing, stop-and-go traffic), it is recommended to inspect the fluid every 60,000 miles and replace it if necessary.
Q4 What are the key differences between the DL382 and DL501 transmissions?
What are the key differences between the DL382 and DL501 transmissions?
The DL382 is a lighter and more compact 7-speed dual-clutch transmission designed for transverse engine applications, while the DL501 is a heavier 7-speed dual-clutch transmission for longitudinal engine setups. The DL382 also features improved efficiency and reduced internal friction compared to the DL501.
Q5 Can the DL382 transmission be reprogrammed or tuned?
Can the DL382 transmission be reprogrammed or tuned?
Yes, the DL382 transmission can be reprogrammed using Audi-approved diagnostic tools like VAS 6154 or ODIS. However, any modifications should be performed by certified technicians to avoid voiding the vehicle's warranty or causing damage to the transmission.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DL382 Transmission Service Manual
Coming SoonOfficial service manual for the DL382 transmission, including detailed repair procedures, torque specifications, and diagnostic codes.
Audi ATF Fluid Specifications
Coming SoonTechnical bulletin outlining the approved transmission fluids for the DL382 transmission, including part numbers and compatibility information.
DL382 Transmission Diagnostic Guide
Coming SoonStep-by-step guide for diagnosing common issues with the DL382 transmission, including error codes and troubleshooting tips.
Audi Q5 Owner's Manual
Coming SoonOfficial owner's manual for the 2017-Present Audi Q5, including maintenance schedules and transmission care recommendations.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.