Audi Audi Q5 2008-2017 Drivetrain Specifications
Detailed technical specifications and documentation for the drivetrain system of the 2008-2017 Audi Q5. Learn about the quattro all-wheel drive system, transmission types, differentials, and more.
Audi Q5 Drivetrain Specifications Overview Specifications
This document provides detailed drivetrain specifications for the 2008-2017 Audi Q5. It includes information on engine options, transmission types, drivetrain systems, suspension, and performance metrics. Use the search functionality to quickly find specific details or navigate through the sections to explore the information systematically.
How to Use
To search for specific drivetrain details, use the search bar at the top of the document. Enter keywords such as engine type, transmission, or drivetrain components to find relevant information quickly.
Navigate through the document by clicking on the section titles. Each section contains subsections with detailed specifications. Use the table of contents or scroll through the sections to find the information you need.
Key Specifications
Engine Options
2.0L I4, 3.0L V6, 3.0L V6 TDI
Transmission Types
6-Speed Manual, 8-Speed Automatic, 7-Speed Dual-Clutch
Drive Systems
Quattro AWD, Ultra Technology
Suspension
MacPherson strut front, Multilink rear
Performance
0-60 mph: 5.8-7.1 seconds, Top Speed: 130-140 mph
Available Specifications
Engine Options
The Audi Q5 offers a range of engine options, including gasoline and diesel variants, designed to deliver optimal performance and efficiency. Below are the key specifications for each engine.
Engine Options
The Audi Q5 offers a range of engine options, including gasoline and diesel variants, designed to deliver optimal performance and efficiency. Below are the key specifications for each engine.
2.0L Turbocharged I4
- Displacement: 2.0 liters
- Cylinders: 4
- Horsepower: 211 HP
- Torque: 258 lb-ft
- Fuel Type: Gasoline
- Years Available: 2009-2016
3.0L Supercharged V6
- Displacement: 3.0 liters
- Cylinders: 6
- Horsepower: 272 HP
- Torque: 295 lb-ft
- Fuel Type: Gasoline
- Years Available: 2011-2017
3.0L V6 TDI
- Displacement: 3.0 liters
- Cylinders: 6
- Horsepower: 240 HP
- Torque: 428 lb-ft
- Fuel Type: Diesel
- Years Available: 2009-2016
Transmission Types
The Audi Q5 features various transmission options, each designed to optimize performance and fuel efficiency. Below are the specifications for each transmission type.
Transmission Types
The Audi Q5 features various transmission options, each designed to optimize performance and fuel efficiency. Below are the specifications for each transmission type.
6-Speed Manual
- Type: Manual
- Gears: 6
- Drivetrain: Quattro AWD
- Availability: Base models 2009-2015
- Features: Manual shift mode
8-Speed Automatic
- Type: Automatic
- Gears: 8
- Drivetrain: Quattro AWD
- Availability: Mid to high trim levels 2012-2017
- Features: Tiptronic manual shift mode
7-Speed Dual-Clutch
- Type: Dual-clutch automatic
- Gears: 7
- Drivetrain: Quattro AWD
- Availability: Performance models 2014-2017
- Features: Paddle shifters
Drive Systems
The Audi Q5 utilizes advanced drivetrain systems to deliver superior traction and control. Below are the key specifications for each drivetrain system.
Drive Systems
The Audi Q5 utilizes advanced drivetrain systems to deliver superior traction and control. Below are the key specifications for each drivetrain system.
Quattro All-Wheel Drive
- Type: Permanent all-wheel drive
- Torque Distribution: Variable
- Features: Self-locking center differential
- Benefits: Enhanced traction and stability
- Availability: All models
Ultra Technology
- Type: Adaptive all-wheel drive
- Features: On-demand torque distribution
- Benefits: Improved fuel efficiency
- Availability: Select models 2016-2017
- Technology: Combines with 7-speed dual-clutch transmission
Suspension and Steering
The Audi Q5 features advanced suspension and steering systems designed for a smooth and responsive driving experience. Below are the specifications for the suspension and steering systems.
Suspension and Steering
The Audi Q5 features advanced suspension and steering systems designed for a smooth and responsive driving experience. Below are the specifications for the suspension and steering systems.
Front Suspension
- Type: MacPherson strut
- Features: Coil springs and stabilizer bars
- Benefits: Optimized ride comfort and handling
- Additional: Adaptive suspension available on select models
Rear Suspension
- Type: Multilink
- Features: Coil springs and stabilizer bars
- Benefits: Enhanced stability and control
- Additional: Adaptive suspension available on select models
Steering
- Type: Rack-and-pinion
- Features: Power-assisted
- Turning Circle: 38.1 feet
- Optional: Dynamic steering with variable assist
Fuel Efficiency
The Audi Q5 offers competitive fuel efficiency across its engine and transmission options. Below are the EPA-estimated fuel economy ratings for each drivetrain configuration.
Fuel Efficiency
The Audi Q5 offers competitive fuel efficiency across its engine and transmission options. Below are the EPA-estimated fuel economy ratings for each drivetrain configuration.
Fuel Economy Ratings
- 2.0L I4 with 8-speed automatic: 20 mpg city, 28 mpg highway
- 3.0L V6 with 8-speed automatic: 19 mpg city, 27 mpg highway
- 3.0L V6 TDI with 8-speed automatic: 24 mpg city, 31 mpg highway
- 2.0L I4 with 6-speed manual: 20 mpg city, 28 mpg highway
- 3.0L V6 with 7-speed dual-clutch: 19 mpg city, 27 mpg highway
Performance Metrics
The Audi Q5 delivers robust performance with its powerful engine options and advanced drivetrain systems. Below are the key performance metrics for each drivetrain configuration.
Performance Metrics
The Audi Q5 delivers robust performance with its powerful engine options and advanced drivetrain systems. Below are the key performance metrics for each drivetrain configuration.
Acceleration
- 2.0L I4: 0-60 mph in 7.0 seconds
- 3.0L V6: 0-60 mph in 6.0 seconds
- 3.0L V6 TDI: 0-60 mph in 6.5 seconds
- 2.0L I4 with manual: 0-60 mph in 7.1 seconds
- 3.0L V6 with dual-clutch: 0-60 mph in 5.8 seconds
Top Speed
- 2.0L I4: 130 mph (electronically limited)
- 3.0L V6: 130 mph (electronically limited)
- 3.0L V6 TDI: 135 mph (electronically limited)
- 2.0L I4 with manual: 130 mph (electronically limited)
- 3.0L V6 with dual-clutch: 140 mph (electronically limited)
Towing Capacity
- Maximum towing capacity: 4,400 lbs
- Requires: Factory-installed towing package
- Recommended: Audi-approved hitch and wiring
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- All-wheel drive (AWD)
- Configuration
- quattro permanent all-wheel drive
- Drivetrain Type
- Transverse mounted engine with torque distribution
- Engine Options
- 2.0L Turbocharged I4, 3.0L Supercharged V6, 3.0L Turbocharged V6
- Transmission
- 6-speed manual, 8-speed automatic tiptronic
Dimensions
- Wheelbase
- 110.5 in (2807 mm)
- Front Track
- 63.7 in (1618 mm)
- Rear Track
- 63.5 in (1613 mm)
- Ground Clearance
- 7.9 in (200 mm)
- Approach Angle
- 22.0 degrees
- Departure Angle
- 23.0 degrees
- Turning Radius
- 39.1 ft (11.9 m)
- Drivetrain Weight
- Approx. 400 lbs (181 kg)
Materials
- Driveshaft
- High-strength steel with CV joints
- Axles
- Forged steel with splined ends
- Differential Housing
- Cast iron with hypoid gears
- Transfer Case
- Aluminum alloy with electronic controls
- Propeller Shaft
- High-strength steel with center bearing
Features
- Drivetrain Features
-
- quattro all-wheel drive with self-locking center differential
- Torque vectoring for improved handling
- Adaptive torque distribution front/rear
- Dynamic ratio rear axle
- Electronically controlled multi-plate clutch
- Transmission Features
-
- 8-speed tiptronic automatic with manual mode
- Dynamic shift program (DSP)
- Coasting function in efficiency mode
- Paddle shifters (optional)
- Manual mode with rev-matched downshifts
- Differential Features
-
- Mechanical rear differential lock
- Electronic differential lock (EDL)
- Torque-sensing front differential
- Wet multi-plate clutch system
- Driveshaft Features
-
- CV joints with internal gear teeth
- Vibrational dampening system
- High-strength, lightweight construction
- Integrated center bearing assembly
- Transfer Case Features
-
- Electronic torque control
- Multi-mode operation (front-wheel drive, all-wheel drive)
- Integrated clutch pack
- Thermal management system
Safety Features
- Electronic Stability Control
-
- Electronic Stability Program (ESP)
- Anti-slip regulation (ASR)
- Electronic differential lock (EDL)
- Brake assist
- Braking Assistance
-
- Anti-lock braking system (ABS)
- Emergency brake assist (EBA)
- Electronic brakeforce distribution (EBD)
- Hill descent assist
- Structural integrity
-
- Reinforced drivetrain components
- Crash-optimized mounting points
- Energy-absorbing drivetrain components
- Strengthened axle shafts
- Protective Features
-
- Drivetrain underbody protection
- Reinforced heat shields
- Integrated skid plates
- Sensors for drivetrain protection
Comfort Features
- Ride Quality
-
- Adaptive suspension (optional)
- Air suspension (optional)
- Dynamic damper control
- Active roll stabilization
- Noise Reduction
-
- Acoustic insulation
- Vibrational damping materials
- Helical gears with noise-reducing coatings
- Sound-absorbing drivetrain components
- Convenience Features
-
- Hill descent control
- Drive select with multiple modes
- Automatic drivetrain calibration
- Paddle shifters for manual control
- Ergonomic Design
-
- Weight distribution optimization
- Low center of gravity
- Effortless drivetrain engagement
- Smooth power delivery
Accessories
- Towing Package
-
- Class II tow hitch
- 7-pin trailer connector
- Trailer stability assist
- Towing wiring harness
- Winter Package
-
- Snow mode for drivetrain
- Winter-specific tire package
- Heated drivetrain components
- Cold-weather drivetrain optimization
- Off-Road Package
-
- Rear differential lock
- All-terrain drivetrain mode
- Skid plates
- Increased ground clearance
Maintenance
- Service interval
-
- Oil change every 5,000 - 7,500 miles
- Brake fluid change every 30,000 miles
- Differential fluid change every 30,000 miles
- Transfer case fluid change every 60,000 miles
- Driveshaft CV joint inspection every 30,000 miles
- Maintenance Notes
-
- Use synthetic oil meeting Audi specifications
- Check drivetrain fluids every 12,000 miles
- Inspect drivetrain components for wear
- Lubricate drivetrain components as needed
Warranty
- Basic Warranty
- Coverage: 4 years / 50,000 milesDetails: Comprehensive coverage for drivetrain components
- Powertrain Warranty
- Coverage: 4 years / 50,000 milesDetails: Extended coverage for engine, transmission, and drivetrain
- Corrosion Perforation Warranty
- Coverage: 12 years / Unlimited milesDetails: Coverage against corrosion perforation
- Emissions Warranty
- Coverage: 2 years / 24,000 milesDetails: Federal emissions standards coverage
Production Details
- Manufacturer
- Name: Audi AGLocation: Ingolstadt, GermanyFacility: Audi Factory, Ingolstadt
- Manufacturing Process
-
- Robotized assembly lines
- Laser welding technology
- Precision machining
- Automated quality control
- Quality Control
- inspection Points: Dimensional accuracy, Material integrity, Functional testing, Durability testingTesting Procedures: Load testing, Torque testing, Endurance testing, Environmental testing
- Sustainability Practices
-
- Recyclable materials
- Energy-efficient manufacturing
- Reduced emissions production
- Waste reduction programs
- Production Metrics
- Annual Production: Approx. 300,000 unitsProduction Cycle: 22 hours per unitQuality Rating: Top tier automotive qualityWarranty Claim Rate: Below industry average
Service Information for Drivetrain Service
Maintenance and service requirements specific to this component
- Oil change with synthetic oil
- Drivetrain fluid level check
- CV joint inspection
- Brake fluid inspection
- Tire rotation
Recommended for normal driving conditions
- Brake fluid change
- Differential fluid change
- Transfer case fluid change
- Driveshaft CV joint lubrication
- Inspect drivetrain mounts
Required for maintaining drivetrain performance
- Major drivetrain inspection
- Replace drivetrain components if worn
- Check and replace drive belts
- Inspect axle shafts
- Perform drivetrain alignment
Critical for long-term drivetrain health
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What type of drivetrain does the 2008-2017 Audi Q5 use?
What type of drivetrain does the 2008-2017 Audi Q5 use?
The 2008-2017 Audi Q5 is equipped with Audi's quattro all-wheel-drive system. This system uses a Torsen (Torque-Sensing) center differential to distribute torque between the front and rear axles, with a default 40:60 front-to-rear torque split. The system can dynamically adjust torque distribution based on driving conditions, up to 70% to the front or 85% to the rear.
Q2 What is the recommended service interval for the drivetrain components?
What is the recommended service interval for the drivetrain components?
Audi recommends inspecting the drivetrain components, including the differential and transfer case, every 40,000 miles or 4 years, whichever comes first. The transmission fluid should be replaced every 60,000 miles or 6 years. Always refer to the owner's manual or consult an Audi-certified technician for specific maintenance schedules.
Q3 Can the quattro system be disabled in the Audi Q5?
Can the quattro system be disabled in the Audi Q5?
No, the quattro all-wheel-drive system in the Audi Q5 cannot be manually disabled. It is a full-time all-wheel-drive system designed to provide optimal traction and stability in all driving conditions. The system operates automatically and continuously adjusts torque distribution based on sensor inputs.
Q4 What is the maximum towing capacity for the Audi Q5 with the standard drivetrain?
What is the maximum towing capacity for the Audi Q5 with the standard drivetrain?
The 2008-2017 Audi Q5 with the standard drivetrain has a maximum towing capacity of 4,400 lbs (2,000 kg) when properly equipped. This includes the use of an Audi-approved tow hitch and adherence to the vehicle's load limits. Always verify the specific towing capacity for your model and trim level.
Q5 What type of differential fluid is recommended for the Audi Q5 drivetrain?
What type of differential fluid is recommended for the Audi Q5 drivetrain?
Audi recommends using synthetic gear oil with a viscosity of SAE 75W-90 for the front and rear differentials. The transfer case requires Audi-specific fluid, part number G 052 145 S2. Always use genuine Audi fluids to ensure compatibility and maintain warranty coverage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi Q5 Drivetrain Maintenance Guide
Coming SoonA comprehensive guide to maintaining the quattro all-wheel-drive system, including fluid specifications, inspection intervals, and troubleshooting tips.
Quattro All-Wheel-Drive System Overview
Coming SoonDetailed technical overview of Audi's quattro system, including its operation, benefits, and key components.
Audi Q5 Towing Capacity and Guidelines
Coming SoonOfficial guidelines for towing with the Audi Q5, including weight limits, hitch requirements, and safety precautions.
Differential and Transfer Case Service Manual
Coming SoonStep-by-step instructions for servicing the differential and transfer case, including fluid replacement and torque specifications.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.