Audi Audi Q5 2008-2017 Brakes Specifications
Detailed technical specifications and service information for the 2008-2017 Audi Q5 braking system, including rotors, calipers, pads, ABS, and maintenance procedures.
Audi Q5 Brake Specifications Overview Specifications
This document provides detailed specifications and technical information for the brake systems of the 2008-2017 Audi Q5. It is designed to assist technicians, enthusiasts, and owners in understanding the braking components, their maintenance, and performance characteristics. Use the search functionality to quickly locate specific details, and navigate through the sections to explore related information.
How to Use
To search for specific information, use the search bar at the top of the document. Enter keywords such as 'rotor size,' 'pad thickness,' or 'fluid type' to find relevant details quickly.
Navigate through the document by selecting sections from the table of contents. Each section is divided into subsections with detailed technical specifications and maintenance guidelines.
Key Specifications
Front Rotor Diameter
12.8 inches (325 mm)
Rear Rotor Diameter
11.8 inches (300 mm)
60-0 mph Stopping Distance
128 feet
Brake Pad Thickness (Front)
0.47 inches (12 mm)
Recommended Brake Fluid
DOT 4 synthetic
Available Specifications
Brake System Overview
The Audi Q5 features a robust braking system designed for optimal performance and safety. This section provides an overview of the key components and their functionality.
Brake System Overview
The Audi Q5 features a robust braking system designed for optimal performance and safety. This section provides an overview of the key components and their functionality.
Front Brake System
- Ventilated disc brakes with 12.8-inch rotors
- Aluminum calipers with piston design
- Dual-circuit brake system for enhanced safety
- Integrated electronic brakeforce distribution (EBD)
- Standard on all trim levels
Rear Brake System
- Solid disc brakes with 11.8-inch rotors
- Steel calipers with piston design
- Compatibility with front-rear brake balance
- Optional rear brake assist
- Shared components with front system for consistency
Brake Components and Specifications
This section details the technical specifications of individual brake components, including rotors, pads, and fluid requirements.
Brake Components and Specifications
This section details the technical specifications of individual brake components, including rotors, pads, and fluid requirements.
Brake Rotors
- Front rotor diameter: 12.8 inches (325 mm)
- Rear rotor diameter: 11.8 inches (300 mm)
- Rotor thickness: 1.0 inch (25 mm) front, 0.8 inch (20 mm) rear
- Material: Ventilated steel front, solid steel rear
- Minimum allowable rotor thickness: 1.0 mm front, 0.8 mm rear
Brake Pads
- Front pad thickness: 0.47 inches (12 mm)
- Rear pad thickness: 0.43 inches (11 mm)
- Material: Semi-metallic for durability
- Wear limit: 1/16 inch (1.5 mm)
- Recommended replacement interval: every 30,000 miles
Brake Performance and Metrics
This section outlines the performance capabilities and key metrics of the Audi Q5 braking system.
Brake Performance and Metrics
This section outlines the performance capabilities and key metrics of the Audi Q5 braking system.
Braking Distance
- 60-0 mph stopping distance: 128 feet
- 80-0 mph stopping distance: 216 feet
- Consistent performance across trim levels
- Optimized for wet and dry conditions
- Enhanced by electronic stability control
Brake Fade Resistance
- Resistance to fade under repeated use
- Cooling vents in front rotors reduce heat buildup
- Improved heat dissipation through rotor design
- Maintains consistent braking performance
- Suitable for high-performance driving
Maintenance and Service
Regular maintenance is crucial for maintaining optimal brake performance. This section provides guidelines for servicing and inspecting the brake system.
Maintenance and Service
Regular maintenance is crucial for maintaining optimal brake performance. This section provides guidelines for servicing and inspecting the brake system.
Brake Fluid
- Recommended fluid type: DOT 4 synthetic
- Change interval: every 2 years or 30,000 miles
- Fluid capacity: 1.5 liters
- Bleeding procedure required after fluid change
- Use only Audi-approved brake fluid
Brake Inspection
- Inspect rotors for warping or excessive wear
- Check pads for wear and contamination
- Examine brake lines for leaks or damage
- Test brake fluid for moisture content
- Recommended inspection interval: every 12,000 miles
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Brakes Specifications
Overview
- Type
- Dual-circuit braking system with diagonal split
- Configuration
- Front ventilated discs, rear solid discs
- Platform
- MLB (Modular Longitudinal Matrix)
- Material
- Steel
- Location
- Front and rear axles
Dimensions
- Front Rotor Diameter
- 12.8 in (326 mm)
- Rear Rotor Diameter
- 11.8 in (300 mm)
- Front Rotor Thickness
- 1.18 in (30 mm)
- Rear Rotor Thickness
- 0.87 in (22 mm)
- Brake Pad Thickness New
- 0.39 in (10 mm)
- Brake Pad Thickness Minimum
- 0.06 in (1.5 mm)
- Brake Fluid Reservoir Capacity
- 0.5 liters (0.13 gallons)
Materials
- Rotors
- Steel
- Brake Pads
- Semi-metallic
- Calipers
- Aluminum
- Brake Lines
- Stainless steel
- Brake Fluid
- DOT 4 synthetic
Features
- Anti-Lock And Traction
-
- Anti-lock Braking System (ABS)
- Anti-Slip Regulation (ASR)
- Electronic Differential Lock (EDL)
- Emergency Braking
-
- Automatic Brake Assist
- Electronic Brakeforce Distribution (EBD)
- Emergency Brake Warning
- Comfort And Convenience
-
- Auto Hold function
- Electronic Parking Brake
- Hill Descent Assist
- Performance
-
- Ventilated front discs for improved heat dissipation
- Floating calipers for consistent braking performance
- Wear indicator for brake pads
Safety Features
- Stability Control
-
- Electronic Stability Control (ESC)
- Secondary Collision Brake Assist
- Collision Mitigation
-
- Pre-sense Braking
- Multi-collision Brake Assist
- Pedestrian Protection
-
- Pedestrian Detection
- Emergency Steering Assist
Comfort Features
- Driving Assistance
-
- Adaptive Cruise Control with Stop&Go
- Traffic Jam Assist
- Emergency Assist
- Convenience
-
- Auto Hold function
- Electronic Parking Brake
- Brake Assist
- Noise Reduction
-
- Acoustic insulation
- Anti-vibration brake pads
- Ergonomics
-
- Adjustable brake pedal
- Illuminated brake warning light
Accessories
- Brake Pads
-
- Semi-metallic
- Low-metallic
- Ceramic
- Rotor Kits
-
- Standard steel
- Cross-drilled
- Slotted
- Brakefluid
-
- DOT 4
- DOT 5.1
- High-performance synthetic
Maintenance
- Service interval
- Every 12,000 miles (19,312 km) or 12 months
- Service Items
-
- Inspect brake pads
- Measure rotor thickness
- Check brake fluid level
- Inspect brake lines
- Test brake system
- Replace brake pads if worn
- Replace rotors if warped
- Maintenance Notes
-
- Replace brake fluid every 2 years or 24,000 miles
- Clean brake rotors every 30,000 miles
- Inspect brake hardware for wear
- Lubricate caliper slides if necessary
Warranty
- Basic
- Miles: 48,000 milesYears: 4 yearsCoverage: New vehicle limited warranty
- Wear
- Miles: 48,000 milesYears: 4 yearsCoverage: Brake components (pads, rotors)
- Extended
- Miles: 100,000 milesYears: 10 yearsCoverage: Extended service contracts available
- Powertrain
- Miles: 70,000 milesYears: 5 yearsCoverage: Brake system components (excluding wear items)
Production Details
- Manufacturer
- Audi AG
- Manufacturing Process
-
- Casting
- Machining
- Drilling
- Surface coating
- Assembly
- Quality Control
- inspection: Dimensional checksTesting: Performance testingCertification: ISO 9001
- Sustainability
-
- Recyclable materials
- Low-emission manufacturing
- Energy-efficient processes
- Production Metrics
- Annual Production: Over 100,000 unitsAssembly Time: Approximately 8 hours per vehicleQuality Rating: Top-tier automotive standard
Service Information for brakes Service
Maintenance and service requirements specific to this component
- Inspect brake pads
- Measure rotor thickness
- Check brake fluid level
- Inspect brake lines
- Test brake system
Essential for maintaining optimal braking performance
- Replace brake pads if worn below 1.5 mm
- Replace rotors if warped or below minimum thickness
- Bleed brake system
- Inspect caliper slides
- Lubricate brake components
More extensive service to ensure reliability
- Replace brake fluid
- Inspect master cylinder
- Check ABS sensors
- Inspect brake hoses
- Test parking brake
Critical for long-term system health
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the brake pad thickness specification for the 2008-2017 Audi Q5?
What is the brake pad thickness specification for the 2008-2017 Audi Q5?
The minimum brake pad thickness for the Audi Q5 is 3mm. If the pads measure less than this, they must be replaced immediately to ensure safe braking performance. Always measure the thickness of both inner and outer pads, as wear may vary.
Q2 What type of brake fluid is recommended for the Audi Q5?
What type of brake fluid is recommended for the Audi Q5?
Audi recommends using DOT 4 brake fluid for the 2008-2017 Q5. The fluid must meet Audi specification VW 501 14. Brake fluid should be replaced every 2 years or 30,000 miles, whichever comes first, to maintain optimal braking performance.
Q3 How do I check the brake rotor thickness on my Audi Q5?
How do I check the brake rotor thickness on my Audi Q5?
The minimum brake rotor thickness for the front rotors is 28.4mm, and for the rear rotors, it is 18.4mm. If the rotors are worn below these specifications or show signs of cracking, scoring, or warping, they must be replaced. Always measure rotor thickness at multiple points to ensure even wear.
Q4 What is the procedure for bleeding the brake system on a 2008-2017 Audi Q5?
What is the procedure for bleeding the brake system on a 2008-2017 Audi Q5?
Bleeding the brake system requires a pressure bleeder or a second person to assist. Start with the wheel farthest from the master cylinder (rear right), then proceed to the rear left, front right, and front left. Use only DOT 4 brake fluid and ensure no air remains in the system. Always follow the official Audi service manual for detailed steps.
Q5 Can I use aftermarket brake pads on my Audi Q5?
Can I use aftermarket brake pads on my Audi Q5?
While aftermarket brake pads may fit, Audi recommends using genuine OEM brake pads to ensure compatibility, performance, and safety. Non-genuine parts may affect braking performance, noise levels, and could void your warranty if they cause damage to other components.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi Q5 Brake System Service Manual
Coming SoonOfficial Audi service manual detailing brake system maintenance, repair, and troubleshooting procedures for the 2008-2017 Q5.
Brake Pad Replacement Guide
Coming SoonStep-by-step guide for replacing brake pads on the 2008-2017 Audi Q5, including torque specifications and safety precautions.
Brake Fluid Flush Procedure
Coming SoonDetailed instructions for performing a brake fluid flush on the Audi Q5, including fluid specifications and bleeding techniques.
Brake Rotor Inspection and Replacement
Coming SoonGuide to inspecting and replacing brake rotors on the 2008-2017 Audi Q5, including minimum thickness specifications and torque values.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.