Audi Audi Q3 2018-present 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L TFSI engine in the 2018-Present Audi Q3. Includes performance data, system overviews, and maintenance guidelines.
2018-Present Audi Q3 2.0L Engine Specifications Specifications
This document provides a comprehensive overview of the 2.0L engine specifications for the 2018-Present Audi Q3. It includes detailed technical information, performance metrics, and key features. Use this guide to understand the capabilities and requirements of the engine, as well as to navigate through the specifications effectively.
How to Use
To find specific information, use the search functionality by typing keywords related to the section or specification you are looking for. The search bar is located at the top of the document.
Navigate through the document by using the sections listed in the table of contents. Each section contains detailed subsections that provide in-depth information about the 2.0L engine.
Key Specifications
Engine Displacement
2.0L
Horsepower
228 HP
Torque
258 lb-ft
0-60 mph
7.0 seconds
Fuel Economy (Combined)
24 mpg
Available Specifications
Engine Overview
This section provides general information about the 2.0L engine, including its type, displacement, and key features. It serves as an introduction to the engine's design and capabilities.
Engine Overview
This section provides general information about the 2.0L engine, including its type, displacement, and key features. It serves as an introduction to the engine's design and capabilities.
Engine Type and Displacement
- 2.0L inline-4 cylinder engine
- Displacement: 1984 cc
- Fuel type: Gasoline
- Engine code: EA888
- Aluminum alloy engine block and cylinder head
Engine Management
- Direct fuel injection
- Turbocharged with intercooler
- Valvetrain: DOHC with variable valve timing
- Cylinder deactivation for improved fuel efficiency
- Start/Stop technology
Performance
This section details the performance specifications of the 2.0L engine, including power output, torque, and transmission options. It also covers drivetrain and acceleration capabilities.
Performance
This section details the performance specifications of the 2.0L engine, including power output, torque, and transmission options. It also covers drivetrain and acceleration capabilities.
Power and Torque
- Horsepower: 228 HP @ 5,000 - 6,200 rpm
- Torque: 258 lb-ft @ 1,600 - 4,400 rpm
- Redline: 6,500 rpm
- Maximum engine speed: 6,500 rpm
Transmission and Drivetrain
- Transmission: 8-speed automatic with Tiptronic
- Drivetrain: Quattro all-wheel drive
- Front/rear torque distribution: Variable, up to 50:50
- Clutch type: Wet clutch for all-wheel drive
Acceleration
- 0-60 mph: 7.0 seconds
- Top speed: Electronically limited to 130 mph
- Quarter mile: 15.1 seconds @ 94 mph
Technical Features
This section highlights the advanced technical features of the 2.0L engine, including fuel injection, turbocharging, and cooling systems. It also covers emissions and fuel efficiency technologies.
Technical Features
This section highlights the advanced technical features of the 2.0L engine, including fuel injection, turbocharging, and cooling systems. It also covers emissions and fuel efficiency technologies.
Fuel Injection and Turbocharging
- Direct fuel injection with piezo injectors
- Single turbocharger with intercooler
- Turbocharger boost pressure: Up to 20.3 psi
- Exhaust manifold integrated into the cylinder head
Cooling and Engine Management
- Dual-circuit cooling system
- Separate coolant circuits for engine block and cylinder head
- Thermostat-controlled coolant flow
- Exhaust gas recirculation (EGR) system
Emissions and Fuel Efficiency
- Emissions standard: Euro 6
- Catalytic converter: Close-coupled with diesel particulate filter
- Fuel efficiency: Up to 28 mpg combined (city/highway)
- CO2 emissions: 188 g/km
Fuel Efficiency
This section provides detailed information about the fuel efficiency of the 2.0L engine, including EPA ratings and fuel tank capacity. It also covers driving range and fuel consumption in different conditions.
Fuel Efficiency
This section provides detailed information about the fuel efficiency of the 2.0L engine, including EPA ratings and fuel tank capacity. It also covers driving range and fuel consumption in different conditions.
Fuel Economy Ratings
- EPA city: 22 mpg
- EPA highway: 29 mpg
- EPA combined: 24 mpg
- Fuel tank capacity: 15.9 gallons
- Driving range: Up to 382 miles on a full tank
Emissions
This section covers the emissions specifications and technologies used in the 2.0L engine to reduce environmental impact. It includes information about emissions standards and reduction technologies.
Emissions
This section covers the emissions specifications and technologies used in the 2.0L engine to reduce environmental impact. It includes information about emissions standards and reduction technologies.
Emissions Technology
- Euro 6 emissions standard
- Selective catalytic reduction (SCR) system
- Diesel particulate filter (DPF)
- Exhaust gas recirculation (EGR)
- Catalytic converter
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- EA888 Gen 3B
- Displacement
- 2.0 liters
- Configuration
- Inline 4-cylinder
- Fuel Type
- Petrol
- Aspiration
- Turbocharged
- Manufacturer
- Audi AG
- Part Number
- 06K-100-000-XX
Performance
- Power Output
- 190 hp @ 4200-6000 rpm
- Torque
- 236 lb-ft @ 1500-4100 rpm
- Compression Ratio
- 11.7:1
- Redline
- 6500 rpm
- Top Speed
- 130 mph (electronically limited)
Dimensions And Weight
- Engine Length
- 18.5 inches
- Engine Width
- 25.6 inches
- Engine Height
- 22.8 inches
- Dry Weight
- 297 lbs
- Oil Capacity
- 5.7 quarts
Fuel System
- injection Type
- Direct Injection
- Fuel Pressure
- 2900 psi
- Fuel Filter Part Number
- 8W0-201-511
- Fuel Pump Part Number
- 8K0-919-051
Cooling System
- Coolant Capacity
- 7.4 quarts
- Thermostat Opening Temperature
- 194°F
- Radiator Part Number
- 8V0-121-253
- Water Pump Part Number
- 06K-121-011
Lubrication System
- Oil Type
- VW 502 00 / 504 00
- Oil Viscosity
- 5W-40
- Oil Filter Part Number
- 06E-115-562
- Oil Pressure
- 43.5-58 psi @ 2000 rpm
Ignition System
- Spark Plug Type
- NGK SILZKFR8E7G
- Spark Plug Gap
- 0.028 inches
- Ignition Coil Part Number
- 06E-905-115
- Ignition Timing
- 10° BTDC @ idle
Emissions
- Emission Standard
- Euro 6d-TEMP
- Catalytic Converter Part Number
- 8V0-254-001
- Oxygen Sensor Part Number
- 06A-906-262
- EGR System
- Integrated into turbocharger
Maintenance
- Spark Plug Replacement interval
- 60,000 miles
- Timing Belt Replacement Interval
- Not applicable (timing chain)
- Air Filter Replacement interval
- 40,000 miles
- Fuel Filter Replacement interval
- 60,000 miles
Diagnostics
- OBD-II Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tool
- VAS 6154 or equivalent
- Diagnostic Protocol
- ISO 15765-4 CAN
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Oil and oil filter change
- Inspect brake system
- Check tire pressure and condition
Use only VW 502 00 / 504 00 compliant oil
- Replace air filter
- Inspect spark plugs
- Check timing chain tension
Replace spark plugs if necessary
- Replace fuel filter
- Inspect coolant system
- Check turbocharger condition
Coolant flush recommended
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L TFSI engine in the 2018-Present Audi Q3?
What is the horsepower and torque output of the 2.0L TFSI engine in the 2018-Present Audi Q3?
The 2.0L TFSI engine in the 2018-Present Audi Q3 produces 184 horsepower (137 kW) at 5,000 rpm and 221 lb-ft (300 Nm) of torque at 1,600-4,000 rpm. This engine is turbocharged and features direct fuel injection for optimal performance and efficiency.
Q2 What type of fuel is recommended for the 2.0L TFSI engine?
What type of fuel is recommended for the 2.0L TFSI engine?
Audi recommends using premium unleaded gasoline with an octane rating of 91 or higher for the 2.0L TFSI engine. Using lower-octane fuel may result in reduced performance and efficiency.
Q3 What is the oil capacity and recommended oil type for the 2.0L TFSI engine?
What is the oil capacity and recommended oil type for the 2.0L TFSI engine?
The 2.0L TFSI engine has an oil capacity of approximately 5.7 liters (6 quarts). Audi recommends using synthetic engine oil that meets the VW 502 00 specification, such as SAE 5W-40 or 0W-30, for optimal performance and longevity.
Q4 What is the service interval for the 2.0L TFSI engine?
What is the service interval for the 2.0L TFSI engine?
Audi recommends servicing the 2.0L TFSI engine every 10,000 miles (16,000 km) or 12 months, whichever comes first. This includes oil and filter changes, as well as inspections of critical components such as the timing belt, spark plugs, and air filter.
Q5 Does the 2.0L TFSI engine require a timing belt or timing chain?
Does the 2.0L TFSI engine require a timing belt or timing chain?
The 2.0L TFSI engine uses a timing chain, which is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended to ensure proper tension and alignment.
Q6 What is the compression ratio of the 2.0L TFSI engine?
What is the compression ratio of the 2.0L TFSI engine?
The 2.0L TFSI engine has a compression ratio of 9.6:1, which is optimized for turbocharged performance and fuel efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 2.0L TFSI Engine Technical Specifications
Coming SoonDetailed technical specifications for the 2.0L TFSI engine, including performance metrics, dimensions, and maintenance requirements.
Audi Q3 Owner's Manual
Coming SoonThe official owner's manual for the 2018-Present Audi Q3, containing detailed information on vehicle operation, maintenance schedules, and troubleshooting.
Audi Genuine Parts Catalog
Coming SoonAccess the official Audi parts catalog to find genuine replacement parts for the 2.0L TFSI engine and other components.
Audi Service and Maintenance Guide
Coming SoonComprehensive guide to servicing and maintaining the 2018-Present Audi Q3, including recommended procedures and intervals for the 2.0L TFSI engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.