Audi Audi Q3 2011-2018 DQ250 Transmission Specifications
Comprehensive technical specifications and service documentation for the DQ250 6-speed dual-clutch transmission (DSG) used in the 2011-2018 Audi Q3. This document covers detailed operational parameters, torque ratings, fluid specifications, maintenance procedures, and diagnostic codes specific to the DQ250 transmission system.
Audi Q3 (2011-2018) DQ250 Transmission Specifications Specifications
This document provides detailed specifications and technical information for the DQ250 dual-clutch transmission used in the 2011-2018 Audi Q3. It covers key features, technical details, performance metrics, maintenance requirements, and troubleshooting tips. Use this guide to understand the capabilities and servicing needs of the DQ250 transmission.
How to Use
To find specific information, use the search function by typing keywords related to the transmission, such as 'gear ratios' or 'fluid capacity'.
Navigate through the document by selecting sections from the table of contents or scrolling through the detailed subsections. Each section is organized to provide a logical flow of information.
Key Specifications
Transmission Type
Dual-clutch automatic (DCT)
Number of Gears
6
Drive Type
FWD / AWD (quattro)
Torque Capacity
Up to 250 Nm
Fuel Efficiency
6.2-7.5 L/100 km (petrol)
Available Specifications
Overview
Introduction to the DQ250 transmission, including its design, functionality, and integration with the Audi Q3 drivetrain.
Overview
Introduction to the DQ250 transmission, including its design, functionality, and integration with the Audi Q3 drivetrain.
Transmission Introduction
- Dual-clutch automatic transmission with 6 forward gears
- Designed for front-wheel drive (FWD) and quattro all-wheel drive (AWD) configurations
- Compact design for improved fuel efficiency and performance
- Compatible with a range of engine options, including petrol and diesel
- Features manual shift mode via paddle shifters or gear lever
Key Features
- Quick gear shifts for sporty driving experience
- Adaptive shifting based on driving conditions
- Low weight and high strength for improved efficiency
- Integrated mechatronic control unit for seamless operation
- Compatible with start/stop technology
Technical Specifications
Detailed technical specifications of the DQ250 transmission, including gear ratios, torque capacity, and other mechanical details.
Technical Specifications
Detailed technical specifications of the DQ250 transmission, including gear ratios, torque capacity, and other mechanical details.
Gearbox Specifications
- Type: Dual-clutch automatic (DCT)
- Number of gears: 6
- Drive type: FWD or AWD (quattro)
- Torque capacity: Up to 250 Nm
- Weight: Approximately 70 kg (dry weight)
Transmission Ratios
- 1st gear: 3.778
- 2nd gear: 2.432
- 3rd gear: 1.578
- 4th gear: 1.190
- 5th gear: 0.927
- 6th gear: 0.778
- Reverse: 3.778
Performance
Performance characteristics of the DQ250 transmission, including acceleration, fuel efficiency, and driving modes.
Performance
Performance characteristics of the DQ250 transmission, including acceleration, fuel efficiency, and driving modes.
Acceleration and Fuel Efficiency
- 0-100 km/h acceleration: 6.9-8.2 seconds (depending on engine)
- Combined fuel economy: 6.2-7.5 L/100 km (petrol models)
- Combined fuel economy: 4.4-5.1 L/100 km (diesel models)
- CO2 emissions: 144-174 g/km (petrol models)
- CO2 emissions: 114-132 g/km (diesel models)
Driving Modes
- Automatic mode for everyday driving
- Manual mode for driver-controlled shifting
- Sport mode for enhanced acceleration and responsiveness
- Efficiency mode for optimized fuel consumption
- Customizable shifting via Audi Drive Select
Maintenance
Maintenance requirements and service intervals for the DQ250 transmission to ensure optimal performance and longevity.
Maintenance
Maintenance requirements and service intervals for the DQ250 transmission to ensure optimal performance and longevity.
Service Intervals
- Transmission oil change: Every 60,000 km or 5 years
- Filter replacement: Every 30,000 km or 3 years
- Mechatronic unit software updates: As recommended by Audi
- Clutch replacement: As needed, typically every 100,000 km
- Gearbox inspection: Every 90,000 km or 7 years
Fluid Requirements
- Transmission fluid: Synthetic ATF (Audi-approved)
- Capacity: Approximately 2.5 liters
- Fluid level check: Every 15,000 km or 1 year
- Recommended viscosity: 0W-30 or 5W-30
- Avoid using non-approved fluids to prevent damage
Troubleshooting
Common issues and diagnostic tips for the DQ250 transmission, including error codes and repair procedures.
Troubleshooting
Common issues and diagnostic tips for the DQ250 transmission, including error codes and repair procedures.
Common Issues
- Mechatronic unit failure: Symptoms include erratic shifting or error codes
- Clutch wear: Symptoms include slipping or hesitation
- Software glitches: Symptoms include intermittent issues or error messages
- Low transmission fluid level: Symptoms include poor shifting or lack of engagement
- Sensor faults: Symptoms include incorrect gear selection or warning lights
Diagnostic Tips
- Check transmission error codes using an OBD-II scanner
- Inspect transmission fluid level and condition
- Test clutch engagement and disengagement
- Verify proper operation of shift paddles or gear lever
- Check for software updates or recalibrations
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
Overview
- Type
- Dual Clutch Transmission (DCT)
- Configuration
- 6-Speed Automatic
- Platform
- MLB (Modular Longitudinal Matrix)
- Material
- Aluminum Housing
- Location
- Front-Wheel Drive (FWD)
Dimensions
- Length
- 650 mm (25.59 in)
- Width
- 400 mm (15.75 in)
- Height
- 350 mm (13.78 in)
- Weight
- 120 kg (264.55 lbs)
- Fluid Capacity
- 3.5 liters (3.7 quarts)
- Torque Capacity
- 250 Nm (184 lb-ft)
- Max Speed
- Governor Limited to 210 km/h (130 mph)
Materials
- Transmission Case
- High-Strength Aluminum Alloy
- Gears
- High-Strength Steel with Shot Peening
- Clutch Pack
- Ceramic Friction Plates
- Bearings
- High-Performance Steel with Polymetric Coating
- Bellhousing
- Cast Aluminum
Features
- Performance Features
-
- Dual Clutch Design for Quick Shifting
- Manual and Automatic Modes
- Paddle Shifters Compatibility
- Adaptive Shift Strategy
- Efficiency Features
-
- Low Friction Coatings on Gears
- Efficient Lubrication System
- Optimized Gear Ratios for Fuel Efficiency
- Reliability Features
-
- Robust Construction for High Torque
- Temperature Resistant Seals
- Corrosion-Resistant Coatings
- Advanced Technology
-
- Integrated Control Module
- CAN Bus Communication
- Adaptive Learning Algorithm
- Compatible with Start/Stop Technology
- Compatibility
-
- Compatible with 2.0L TFSI Engine
- Works with Quattro All-Wheel Drive
- Supports Manual and Automatic Modes
- Integrated with Audi Drive Select
Safety Features
- Protective Features
-
- Over-Torque Protection
- Thermal Overload Protection
- Clutch Overheat Protection
- Monitoring Systems
-
- Transmission Temperature Monitoring
- Clutch Wear Monitoring
- Pressure Monitoring System
- Failsafe Mode
-
- Limp Home Mode in Case of Failure
- Emergency Shifting Protocol
- Fail-Safe Gear Engagement
Comfort Features
- Smooth Operation
-
- Smooth Shift Patterns
- Low NVH (Noise, Vibration, Harshness)
- Adaptive Shift Quality
- Noise Reduction
-
- Sound Insulation
- Dampened Gear Engagement
- Helical Gear Design
- Convenience Features
-
- Creep Function in Automatic Mode
- Hill Start Assist Integration
- Compatibility with Adaptive Cruise Control
Accessories
- Transmission Fluid
-
- Synthetic ATF (Automatic Transmission Fluid)
- Capacities: 3.5 liters (3.7 quarts)
- Change Interval: Every 60,000 miles
- Filters
-
- Transmission Pan Gasket
- Filter Replacement Interval: Every 30,000 miles
- Other Accessories
-
- Drain Plug Kit
- Transmission Pan with Drain Plug
- Fluid Level Dipstick
Maintenance
- Service interval
- Every 30,000 miles or 2 years
- Service Items
-
- Transmission Fluid Change
- Filter Replacement
- Clutch Pack Inspection
- Gear Lubrication Check
- Software Update if Available
- Notes
- Check for any software updates during service. Use only Audi-approved transmission fluid.
Warranty
- Basic Warranty
- Miles: 50,000 milesYears: 4 yearsCoverage: Full coverage for parts and labor
- Powertrain Warranty
- Miles: 70,000 milesYears: 5 yearsCoverage: Covers transmission and internal components
- Emissions Warranty
- Miles: 80,000 milesYears: 7 yearsCoverage: Emissions-related components only
- Adjustment Warranty
- Miles: 12,000 milesYears: 1 yearCoverage: Adjustments and minor repairs
Production Details
- Manufacturer
- Volkswagen Group
- Manufacturing Process
-
- Robotic Welding
- CNC Machining
- Heat Treatment
- Surface Coating
- Quality Control
- inspection: 100% End-of-Line TestingCertifications: ISO 9001, IATF 16949
- Sustainability Practices
-
- Recyclable Materials
- Energy-Efficient Production
- Waste Reduction Programs
- Production Metrics
- Units Per Year: 200,000+ units annuallyPlants: Kassel, Germany, Barcelona, Spain
Service Information for DQ250 Transmission Service
Recommended maintenance schedule for optimal performance and longevity.
- Transmission Fluid Change
- Filter Replacement
- Clutch Pack Inspection
- Gear Lubrication Check
- Software Update if Available
Check for any software updates. Use only Audi-approved transmission fluid.
- Transmission Pan Gasket Replacement
- Drain Plug Replacement
- Transmission Mount Inspection
- Shift Cable Adjustment
- Battery Disconnect Procedure
Inspect transmission mounts for wear. Perform shift cable calibration after adjustment.
- Clutch Pack Replacement
- Gear Lubrication Renewal
- Solenoid Pack Check
- Pressure Sensor Calibration
- Transmission Control Module Update
Major service recommended. Ensure proper alignment after clutch replacement.
Common Questions
Find answers to common questions about torque specifications
Q1 What is the torque capacity of the DQ250 transmission in the 2011-2018 Audi Q3?
What is the torque capacity of the DQ250 transmission in the 2011-2018 Audi Q3?
The DQ250 transmission in the 2011-2018 Audi Q3 has a torque capacity of up to 350 Nm (258 lb-ft). This makes it suitable for the 2.0 TFSI and 2.0 TDI engines commonly found in this model range.
Q2 What type of fluid is recommended for the DQ250 transmission?
What type of fluid is recommended for the DQ250 transmission?
The DQ250 transmission requires VW/Audi-approved dual-clutch transmission fluid (DCTF), specifically part number G 052 182 A2. The fluid capacity is approximately 7.2 liters, but always refer to the service manual for precise refill quantities after draining.
Q3 How often should the DQ250 transmission fluid be changed?
How often should the DQ250 transmission fluid be changed?
Audi recommends changing the DQ250 transmission fluid every 60,000 miles (96,000 km) or 6 years, whichever comes first. However, severe driving conditions may necessitate more frequent service intervals.
Q4 What are the common symptoms of a failing DQ250 mechatronic unit?
What are the common symptoms of a failing DQ250 mechatronic unit?
Common symptoms include erratic shifting, delayed engagement, transmission slipping, and fault codes such as P17BF or P189C. If these issues arise, the mechatronic unit may require diagnostics, repair, or replacement.
Q5 Can the DQ250 transmission be repaired, or does it require replacement?
Can the DQ250 transmission be repaired, or does it require replacement?
The DQ250 transmission is repairable, with common serviceable components including the clutch packs, mechatronic unit, and seals. However, severe internal damage may necessitate a complete transmission replacement.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi DQ250 Transmission Service Manual
Coming SoonOfficial service manual for the DQ250 transmission, including detailed repair procedures, torque specifications, and diagnostic codes.
DQ250 Mechatronic Unit Repair Guide
Coming SoonStep-by-step guide for diagnosing and repairing the DQ250 mechatronic unit, including common fault codes and troubleshooting tips.
Audi Q3 Transmission Fluid Replacement Procedure
Coming SoonDetailed instructions for replacing the transmission fluid in the DQ250 transmission, including fluid type, capacity, and safety precautions.
DQ250 Transmission Technical Specifications
Coming SoonComprehensive technical specifications for the DQ250 transmission, including torque ratings, gear ratios, and compatibility with Audi Q3 models.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.