Audi Audi A7 2018-present 3.0L Engine Specifications
Detailed technical specifications for the 3.0L TFSI V6 engine in the 2018-Present Audi A7. Includes performance metrics, fuel system details, turbocharging, and emissions compliance. Essential for technicians and enthusiasts.
2018-Present Audi A7 3.0L Engine Specifications Specifications
This document provides a comprehensive overview of the 3.0L engine specifications for the 2018-Present Audi A7. It includes detailed technical information, performance metrics, and operational guidelines. Use this guide to understand the engine's capabilities, maintenance requirements, and key features. Navigate through the sections to find specific details or use the search functionality to quickly locate information.
How to Use
To search for specific information, use the search bar at the top of the document. Enter keywords such as 'horsepower,' 'torque,' or 'fuel efficiency' to find relevant details. You can also search for specific subsections or technical terms.
To navigate this document, use the table of contents on the left sidebar. Click on major sections to expand them and view subsections. Each section provides detailed technical points and specifications. Use the 'Quick Reference' section for key metrics at a glance.
Key Specifications
Horsepower
335 HP
Torque
369 lb-ft
0-60 mph
5.2 seconds
Fuel Economy (combined)
24 mpg
Emissions Standard
Euro 6
Available Specifications
Engine Overview
This section provides an overview of the 3.0L engine, including its design, configuration, and key technologies. It outlines the engine's construction, fueling system, and performance capabilities.
Engine Overview
This section provides an overview of the 3.0L engine, including its design, configuration, and key technologies. It outlines the engine's construction, fueling system, and performance capabilities.
Engine Displacement and Configuration
- Displacement: 3.0 liters
- Configuration: V6
- Cylinder block material: Aluminum
- Cylinder head material: Aluminum
- Valvetrain: Dual overhead camshafts with 24 valves
Fuel System and Technology
- Fuel type: Premium unleaded gasoline
- Fuel injection system: Direct fuel injection
- Boosting system: Twin-scroll turbocharger
- Engine management system: Bosch ME 17.1.1
- Emissions control: Euro 6 compliant
Performance Specifications
This section details the performance metrics of the 3.0L engine, including power output, torque, and acceleration capabilities. It also covers transmission and drivetrain specifications.
Performance Specifications
This section details the performance metrics of the 3.0L engine, including power output, torque, and acceleration capabilities. It also covers transmission and drivetrain specifications.
Power and Torque
- Maximum horsepower: 335 HP @ 5,000-6,400 rpm
- Maximum torque: 369 lb-ft @ 1,600-4,500 rpm
- Power-to-weight ratio: Approximately 10.3 lbs/HP
- Torque-to-weight ratio: Approximately 13.1 lbs/torque
Transmission and Drivetrain
- Transmission type: 7-speed S tronic dual-clutch automatic
- Drive type: Quattro all-wheel drive
- Axle ratio: 5.61:1
- Top speed: Electronically limited to 155 mph
Acceleration
- 0-60 mph: 5.2 seconds
- Quarter-mile: 13.7 seconds @ 102 mph
- Rolling acceleration (50-70 mph): 3.4 seconds
Mechanical Features
This section covers the mechanical components and features of the 3.0L engine, including cooling systems, lubrication, and engine mounts. It provides details on the engine's structural integrity and operational efficiency.
Mechanical Features
This section covers the mechanical components and features of the 3.0L engine, including cooling systems, lubrication, and engine mounts. It provides details on the engine's structural integrity and operational efficiency.
Engine Construction
- Cylinder block: High-strength aluminum alloy
- Cylinder liners: Low-friction, plasma-coated
- Pistons: Forged aluminum with steel ring inserts
- Connecting rods: Forged steel with cracked bearings
- Crankshaft: Forged steel with counterweights
Cooling and Lubrication
- Cooling system: Dual-circuit crossflow radiator
- Coolant type: OAT (Organic Acid Technology)
- Lubrication system: Pressure-feed system with oil cooler
- Oil capacity: Approximately 6.5 quarts
- Recommended oil viscosity: 5W-30 synthetic
Engine Management and Ancillaries
- Water pump: Electrically driven with variable speed
- Alternator: High-efficiency 150A
- Starter motor: High-torque 1.4kW
- Engine mounts: Hydraulic active mounts
- Belts: Serpentine belt with automatic tensioner
Fuel Efficiency and Emissions
This section provides information on the fuel efficiency and emissions performance of the 3.0L engine. It includes EPA ratings, fuel tank capacity, and emissions control technologies.
Fuel Efficiency and Emissions
This section provides information on the fuel efficiency and emissions performance of the 3.0L engine. It includes EPA ratings, fuel tank capacity, and emissions control technologies.
Fuel Economy
- EPA estimated mpg (city): 22 mpg
- EPA estimated mpg (highway): 29 mpg
- EPA estimated mpg (combined): 24 mpg
- Fuel tank capacity: 19.3 gallons
- Range (combined): Approximately 463 miles
Emissions and Environment
- Emissions standard: Euro 6 compliant
- CO2 emissions (combined): 216 g/mile
- NOx emissions: Reduced through SCR (Selective Catalytic Reduction)
- Particulate matter (PM) emissions: Controlled by DPF (Diesel Particulate Filter)
- Fuel sulfur tolerance: Up to 50 ppm
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- EA839
- Engine Type
- V6 TFSI
- Displacement
- 2995 cc
- Configuration
- 60-degree V6
- Aspiration
- Turbocharged
- Fuel System
- Direct Injection
- Manufacturer
- Audi AG
- Part Number
- 06L100033
Performance Specifications
- Horsepower
- 335 hp @ 5000-6400 rpm
- Torque
- 369 lb-ft @ 1370-4500 rpm
- Compression Ratio
- 11.2:1
- Redline
- 6800 rpm
- Fuel Type
- Premium Unleaded (91+ octane)
Dimensions And Weight
- Length
- 470 mm
- Width
- 680 mm
- Height
- 640 mm
- Dry Weight
- 172 kg
- Oil Capacity
- 7.0 liters
Cylinder Block
- Material
- Aluminum-Silicon Alloy
- Bore
- 84.5 mm
- Stroke
- 89.0 mm
- Cylinder Spacing
- 90 mm
- Main Bearing Diameter
- 60 mm
Cylinder Head
- Material
- Aluminum
- Valvetrain
- DOHC, 4 valves per cylinder
- Valve Diameter intake
- 34.0 mm
- Valve Diameter Exhaust
- 28.5 mm
- Camshaft Drive
- Chain-driven
- Part Number
- 06L103351
Turbocharger
- Type
- Twin-scroll Turbocharger
- Boost Pressure
- 1.2 bar
- Compressor Wheel Diameter
- 46 mm
- Turbine Wheel Diameter
- 50 mm
- Part Number
- 06L145702
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 87°C
- Radiator Type
- Aluminum Crossflow
- Water Pump Type
- Electric
- Part Number
- 06L121011
Lubrication System
- Oil Pump Type
- Variable Displacement
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Filter Type
- Cartridge
- Oil Filter Part Number
- 06L115562
- Oil Viscosity Recommendation
- 5W-40 or 0W-30 (VW 502 00/505 00)
Ignition System
- Spark Plug Type
- Iridium
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Type
- Pencil Coil
- Ignition Coil Part Number
- 06L905115
- Ignition Timing
- Adjustable via ECU
Fuel System Specifications
- Fuel Pump Type
- High-pressure Electric
- Fuel Pressure
- 200 bar
- injector Type
- Direct Injection
- injector Part Number
- 06L906036
- Fuel Filter Type
- In-line
- Fuel Filter Part Number
- 06L127434
Emissions System
- Catalytic Converter Type
- Three-way Catalyst
- Oxygen Sensor Type
- Wideband
- Egr System
- Integrated into Turbocharger
- Particulate Filter
- Yes (GPF)
- Emissions Standard
- Euro 6d-TEMP
Operational Limits
- Maximum Engine Speed
- 7000 rpm
- Maximum Turbocharger Speed
- 220000 rpm
- Maximum Coolant Temperature
- 120°C
- Maximum Oil Temperature
- 150°C
- Maximum intake Air Temperature
- 75°C
Maintenance Specifications
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Inspection Interval
- 120000 miles
- Coolant Replacement interval
- 5 years or 50000 miles
- Air Filter Replacement interval
- 30000 miles
Diagnostic Specifications
- Obd Ii Compliance
- Yes
- Diagnostic interface
- CAN-BUS
- Fault Code Reading
- Via VCDS or OBD-II Scanner
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tool Recommendation
- VCDS (VAG-COM)
Service Information Service
Detailed service requirements and schedules for the 3.0L TFSI engine
- Engine oil and filter change
- Inspect timing chain tensioner
- Check coolant level and condition
- Inspect turbocharger system for leaks
Use only Audi-approved oil and filters
- Replace air filter
- Inspect spark plugs
- Check fuel system for leaks
- Inspect PCV system
Replace spark plugs if necessary
- Replace spark plugs
- Replace coolant
- Inspect timing chain and guides
- Check turbocharger actuator function
Timing chain replacement may be required if excessive wear is detected
- Replace timing chain and tensioner
- Replace water pump
- Inspect and clean intake valves
- Replace fuel filter
Perform carbon cleaning on intake valves if necessary
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L TFSI engine in the 2018-Present Audi A7?
What is the horsepower and torque output of the 3.0L TFSI engine in the 2018-Present Audi A7?
The 3.0L TFSI V6 engine in the 2018-Present Audi A7 produces 335 horsepower at 5,000-6,400 rpm and 369 lb-ft of torque at 1,370-4,500 rpm. This engine features a turbocharger and direct fuel injection for optimal performance and efficiency.
Q2 What type of fuel does the 3.0L TFSI engine require?
What type of fuel does the 3.0L TFSI engine require?
The 3.0L TFSI engine requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower-octane fuel may result in reduced performance and potential engine knocking.
Q3 What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
The 3.0L TFSI engine has an oil capacity of approximately 7.2 liters (7.6 quarts). Audi recommends using synthetic engine oil with a viscosity grade of 5W-40 or 0W-30 that meets the VW 502 00 or VW 504 00 specification.
Q4 What is the service interval for the 3.0L TFSI engine?
What is the service interval for the 3.0L TFSI engine?
Audi recommends an oil change and inspection service every 10,000 miles or 12 months, whichever comes first. Additional maintenance tasks, such as spark plug replacement, are required every 35,000 miles.
Q5 Does the 3.0L TFSI engine feature cylinder deactivation?
Does the 3.0L TFSI engine feature cylinder deactivation?
Yes, the 3.0L TFSI engine includes Audi's Cylinder on Demand (COD) technology, which deactivates three cylinders under light load conditions to improve fuel efficiency.
Q6 What is the compression ratio of the 3.0L TFSI engine?
What is the compression ratio of the 3.0L TFSI engine?
The 3.0L TFSI engine has a compression ratio of 11.2:1, which is optimized for performance and efficiency in conjunction with the turbocharging system.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 3.0L TFSI Engine Technical Overview
Coming SoonA detailed technical overview of the 3.0L TFSI engine, including specifications, features, and performance data.
Audi A7 Maintenance Schedule
Coming SoonThe official maintenance schedule for the 2018-Present Audi A7, including service intervals and recommended procedures.
Audi Genuine Parts Catalog
Coming SoonAccess the official catalog of Audi genuine parts for the 3.0L TFSI engine and other components.
Audi Warranty Information
Coming SoonComprehensive details about Audi's warranty coverage, including terms, conditions, and implications for aftermarket modifications.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.