Audi Audi A6 2011-2018 4.2L Engine Specifications
Detailed technical specifications and documentation for the 4.2L V8 FSI engine in the 2011-2018 Audi A6. Includes performance metrics, system schematics, and maintenance guidelines.
2011-2018 Audi A6 4.2L Engine Specifications Specifications
This document provides a comprehensive overview of the 4.2L-engine specifications for the 2011-2018 Audi A6. It includes detailed technical information, performance metrics, and maintenance guidelines. Use this guide to understand the capabilities and requirements of the engine, or to compare specifications for different model years. You can search for specific terms or navigate through the sections to find the information you need.
How to Use
To search for specific information, use the search bar at the top of the document. Type in keywords related to the specification you are looking for, such as 'horsepower', 'torque', or 'fuel capacity', and press enter to find relevant results.
To navigate through the document, use the table of contents on the left side. Click on the major sections to expand them, and then click on subsections to view detailed information. You can also use the 'Quick Reference' section for key specifications at a glance.
Key Specifications
Horsepower
350 HP @ 6,800 rpm
Torque
325 lb-ft @ 3,500 rpm
Displacement
4.2 liters (4,163 cc)
0-60 mph
5.5 seconds
Top Speed
155 mph (electronically limited)
Available Specifications
Engine Overview
This section provides a general overview of the 4.2L engine used in the 2011-2018 Audi A6. It includes information about the engine design, fuel system, and emissions standards. Use this section to understand the basic architecture and features of the engine.
Engine Overview
This section provides a general overview of the 4.2L engine used in the 2011-2018 Audi A6. It includes information about the engine design, fuel system, and emissions standards. Use this section to understand the basic architecture and features of the engine.
Engine Design
- 4.2L V8 engine with 90-degree cylinder banks
- Cast aluminum alloy engine block and cylinder heads
- Double overhead camshafts (DOHC) with variable valve timing
- 32 valves (4 valves per cylinder)
- Dry-sump lubrication system
Fuel System
- Direct fuel injection (FSI) system
- Fuel pressure: 150 bar
- Fuel type: Premium unleaded gasoline (91 octane or higher)
- Fuel tank capacity: 19.3 gallons (73 liters)
- Fuel economy (city/highway/combined): 14/21/17 mpg
Emissions
- Emissions standard: EU5
- Catalytic converter with two primary and two secondary oxygen sensors
- EGR (Exhaust Gas Recirculation) system
- Reduced emissions compared to previous models
- Meets or exceeds all applicable emissions regulations
Performance
This section provides detailed performance specifications for the 4.2L engine in the 2011-2018 Audi A6. It includes information about power output, torque, acceleration, and top speed. Use this section to understand the engine's capabilities and driving dynamics.
Performance
This section provides detailed performance specifications for the 4.2L engine in the 2011-2018 Audi A6. It includes information about power output, torque, acceleration, and top speed. Use this section to understand the engine's capabilities and driving dynamics.
Power Output
- Maximum horsepower: 350 HP @ 6,800 rpm
- Maximum torque: 325 lb-ft @ 3,500 rpm
- Power per liter: 83 HP/liter
- Redline: 6,800 rpm
- Peak power delivery across the rev range
Acceleration
- 0-60 mph: 5.5 seconds
- 0-100 mph: 13.5 seconds
- Quarter mile: 14.1 seconds @ 98 mph
- Standing start acceleration
- Smooth power delivery for responsive driving
Top Speed
- Electronic top speed limiter: 155 mph
- Unlimited top speed: 173 mph
- Speed governor in place for safety
- Aerodynamic limitations at high speeds
- Performance-oriented gearing
Technical Specifications
This section provides key technical specifications for the 4.2L engine in the 2011-2018 Audi A6. It includes information about displacement, cylinders, valves, and other critical engine components. Use this section to understand the engine's architecture and design.
Technical Specifications
This section provides key technical specifications for the 4.2L engine in the 2011-2018 Audi A6. It includes information about displacement, cylinders, valves, and other critical engine components. Use this section to understand the engine's architecture and design.
Displacement
- Total displacement: 4,163 cc (4.2 liters)
- Bore: 84.5 mm
- Stroke: 92.8 mm
- Bore/stroke ratio: 0.91
- Cylinder spacing: 90 mm
Cylinders
- 8 cylinders in V configuration
- Cylinder block material: High-strength aluminum
- Cylinder head material: Aluminum alloy
- Cylinder liners: Wet-type, cast iron
- Piston material: Forged aluminum
Valves and Timing
- 32 valves (4 per cylinder)
- Variable intake and exhaust camshaft timing
- Hydraulic valve lifters
- Valve diameter: Intake 33.8 mm, Exhaust 28.8 mm
- Valve spring design: Dual springs per valve
Compression and Drivetrain
- Compression ratio: 12.5:1
- Drivetrain: Quattro all-wheel drive
- Transmission: 6-speed Tiptronic automatic
- Axle ratio: 3.19:1
- Limited-slip differential: Optional
Maintenance and Service
This section provides maintenance and service information for the 4.2L engine in the 2011-2018 Audi A6. It includes recommended service intervals, oil requirements, and other maintenance guidelines. Use this section to keep your engine in optimal condition.
Maintenance and Service
This section provides maintenance and service information for the 4.2L engine in the 2011-2018 Audi A6. It includes recommended service intervals, oil requirements, and other maintenance guidelines. Use this section to keep your engine in optimal condition.
Service Intervals
- Oil change interval: Every 5,000 to 7,500 miles
- Spark plug replacement: Every 30,000 miles
- Belt replacement: Every 60,000 miles
- Fluid flush intervals: Every 30,000 miles
- Inspection intervals: Every 15,000 miles
Oil Requirements
- Recommended oil: 5W-30 synthetic
- Oil capacity: 6.5 quarts (6.1 liters)
- Oil filter: Audi-specific or equivalent
- Oil change cost: Approximately $100-$150
- Oil quality: Meets or exceeds API SN standards
Cooling System
- Coolant type: Audi-approved 50/50 mix
- Coolant capacity: 4.5 gallons (17 liters)
- Radiator material: Aluminum
- Water pump: Belt-driven, replace every 60,000 miles
- Thermostat: Opens at 180°F (82°C)
Common Issues
- Oil leaks from valve cover gaskets
- Carbon buildup on intake valves
- PCV system clogging
- Spark plug wear
- Catalytic converter failure
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
Overview
- Type
- V8
- Configuration
- 90-degree V8
- Platform
- Audi MLB (Modular Longitudinal Matrix)
- Material
- Aluminum alloy
- Location
- Front longitudinal
Dimensions
- Displacement
- 4.2 liters (4229 cc)
- Power
- 310 horsepower (228 kW) at 6800 rpm
- Torque
- 325 lb-ft (440 Nm) at 3000-5000 rpm
- Length
- 20.47 inches (520 mm)
- Width
- 18.11 inches (460 mm)
- Height
- 12.80 inches (325 mm)
- Dry Weight
- 404 lbs (183 kg)
Materials
- Engine Block
- Aluminum alloy with cast iron sleeves
- Cylinder Head
- Aluminum alloy
- Crankshaft
- Forged steel
- Connecting Rods
- Forged steel
- Valves
- Stainless steel
Features
- Fuel System
-
- Direct fuel injection
- Dual fuel injectors per cylinder
- Variable fuel pressure control
- Emissions
-
- Catalytic converter with secondary air injection
- Variable valve timing
- EGR (Exhaust Gas Recirculation) system
- Performance
-
- Variable intake manifold
- Dry-sump lubrication system
- Dual-row timing chain
- Cooling
-
- Dual water pumps
- Electric cooling fans
- Coolant temperature-controlled thermostat
Safety Features
- Engine Protection
-
- Engine immobilizer
- Overheat protection system
- Oil level warning system
- Sensors
-
- Knock sensors
- Crankshaft position sensor
- Camshaft position sensor
- Cooling System Protection
-
- Coolant overflow protection
- Radiator fan fail-safe operation
Comfort Features
- Noise Reduction
-
- Acoustic engine cover
- Helical gear teeth
- Balanced crankshaft
- Smooth Operation
-
- Hydraulic engine mounts
- Dual-mass flywheel
- Electronic throttle control
- Convenience
-
- Start/Stop technology
- Automatic oil filler cap
- Service interval indicator
Accessories
- Maintenance Accessories
-
- Oil drain pan
- Socket set for service
- Fuel injection cleaning kit
- Performance Accessories
-
- High-performance air filter
- Engine tuning software
- Lightweight pulley kit
- Protection Accessories
-
- Engine cover protection film
- Rust-proofing coating
- Heat shield wrap
Maintenance
- Service interval
- 5,000 to 7,500 miles (8,000 to 12,000 km)
- Service Items
-
- Oil change with synthetic oil
- Filter replacement (oil, air, fuel)
- Tire pressure check
- Brake fluid level check
- Battery health test
- Maintenance Notes
- Follow Audi-recommended maintenance schedule for optimal performance and longevity.
Warranty
- Basic Warranty
- Miles: 50,000 milesYears: 4 yearsCoverage: Bumper-to-bumper
- Powertrain Warranty
- Miles: 70,000 milesYears: 5 yearsCoverage: Engine, transmission, and drivetrain
- Corrosion Perforation Warranty
- Miles: Unlimited milesYears: 12 yearsCoverage: Body panels and sheet metal
- Roadside Assistance
- Miles: Unlimited milesYears: 4 yearsCoverage: 24/7 emergency services
Production Details
- Manufacturer
- Audi AG
- Manufacturing Process
-
- Cylinder block machining
- Cylinder head casting
- Crankshaft forging
- Engine assembly
- Quality Control
- inspection: End-of-line testingCertification: ISO/TS 16949Warranty Period: 4 years/50,000 miles
- Sustainability Practices
-
- Recyclable materials
- Low-emission production
- Energy-efficient manufacturing
- Production Metrics
- Production Year: 2011-2018Units Produced: Over 100,000 unitsAssembly Time: Approx. 20 hours per engine
Service Information for 4.2l engine Service
Maintenance and service requirements specific to this component
- Oil and filter change
- Tire pressure check and adjustment
- Brake pad inspection
- Fluid level check (coolant, windshield, transmission)
- Battery terminals inspection
Standard maintenance interval. Check for any software updates.
- Air filter replacement
- Spark plug inspection
- Drive belt inspection
- Suspension and steering system check
- Exhaust system inspection
Intermediate service. Inspect belts for cracks or wear.
- Spark plug replacement
- Fuel filter replacement
- Cabin air filter replacement
- Brake fluid replacement
- Coolant system flush and refill
Major service. Ensure all fluids are Audi-approved specifications.
- Drive belt replacement
- Water pump replacement
- PCV valve replacement
- Engine mount inspection
- Suspension component replacement if needed
Critical service interval. Replace timing belt if equipped.
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 4.2L V8 engine in the 2011-2018 Audi A6?
What is the horsepower and torque output of the 4.2L V8 engine in the 2011-2018 Audi A6?
The 4.2L V8 FSI engine in the 2011-2018 Audi A6 produces 350 horsepower at 6,800 rpm and 325 lb-ft of torque at 3,500 rpm. This engine is designed for high performance and smooth power delivery.
Q2 What type of fuel system does the 4.2L engine use?
What type of fuel system does the 4.2L engine use?
The 4.2L engine utilizes a direct fuel injection system, known as FSI (Fuel Stratified Injection). This system optimizes fuel delivery for improved efficiency and performance, with a fuel pressure of up to 1450 psi (100 bar).
Q3 What is the recommended oil type and capacity for the 4.2L engine?
What is the recommended oil type and capacity for the 4.2L engine?
Audi recommends using VW 502 00 or VW 504 00 compliant synthetic oil with a viscosity of 5W-40 or 5W-30. The oil capacity is approximately 9.3 liters (9.8 quarts), including the oil filter.
Q4 What is the service interval for the timing chain on the 4.2L engine?
What is the service interval for the timing chain on the 4.2L engine?
The timing chain on the 4.2L engine is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended every 60,000 miles to ensure proper tension and alignment.
Q5 What is the compression ratio of the 4.2L engine?
What is the compression ratio of the 4.2L engine?
The 4.2L V8 engine has a compression ratio of 12.5:1, which contributes to its high efficiency and power output.
Q6 What type of cooling system does the 4.2L engine use?
What type of cooling system does the 4.2L engine use?
The 4.2L engine features a liquid-cooled system with a dual-circuit cooling design. The coolant capacity is approximately 12 liters (12.7 quarts), and Audi recommends using G12++ or G13 coolant.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 4.2L V8 Engine Technical Specifications
Coming SoonDetailed technical specifications for the 4.2L V8 engine, including performance metrics, dimensions, and system details.
Audi A6 Service and Maintenance Guide
Coming SoonComprehensive guide for servicing and maintaining the 2011-2018 Audi A6, including the 4.2L engine.
FSI Fuel System Overview
Coming SoonAn in-depth explanation of the FSI fuel injection system used in the 4.2L engine, including operation and maintenance tips.
Audi Genuine Parts Catalog
Coming SoonOfficial catalog for Audi genuine parts, including components for the 4.2L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.