Audi Audi A4 2017-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L V6 TFSI engine in the 2017-Present Audi A4. Covers performance, maintenance, and repair guidelines.
2017-Present Audi A4 3.0L Engine Specifications Overview Specifications
This document provides detailed specifications and technical information for the 3.0L engine available in the 2017-Present Audi A4. It is designed to serve as a comprehensive reference guide for engineers, technicians, and enthusiasts. The document is organized into major sections, each focusing on a specific aspect of the engine, with subsections providing detailed technical points. Use the search functionality to quickly locate specific information or navigate through the sections to explore the engine's features and capabilities.
How to Use
To search for specific information, use the search functionality by typing keywords related to the engine specifications (e.g., 'horsepower,' 'torque,' 'fuel efficiency'). Results will highlight relevant sections and subsections.
Navigate through the document by exploring the major sections listed in the table of contents. Each section is divided into subsections that provide detailed technical points. Use the section titles and descriptions to guide your exploration.
Key Specifications
Displacement
3.0 liters
Horsepower
349 HP
Torque
369 lb-ft
0-60 mph
5.6 seconds
Fuel Economy (Combined)
23 mpg
Available Specifications
Engine Overview
This section provides an overview of the 3.0L engine, including its type, displacement, and key features. It serves as an introduction to the engine's design and capabilities.
Engine Overview
This section provides an overview of the 3.0L engine, including its type, displacement, and key features. It serves as an introduction to the engine's design and capabilities.
Engine Displacement and Type
- Displacement: 3.0 liters
- Engine type: V6
- Fuel type: Gasoline
- Cylinder arrangement: V6
- Valve train: DOHC (Dual Overhead Camshaft)
Key Features
- Single turbocharger with intercooler
- Direct fuel injection (up to 250 bar)
- Valve lift system for optimized performance
- Exhaust gas recirculation (EGR) for reduced emissions
- Engine start/stop system for improved fuel efficiency
Performance Specifications
This section details the performance capabilities of the 3.0L engine, including power output, torque, and transmission specifications. It also covers acceleration and top speed.
Performance Specifications
This section details the performance capabilities of the 3.0L engine, including power output, torque, and transmission specifications. It also covers acceleration and top speed.
Power Output
- Maximum horsepower: 349 HP @ 5,000-6,000 rpm
- Maximum torque: 369 lb-ft @ 1,600-4,500 rpm
- Specific output: 116.3 HP per liter
- Redline: 6,500 rpm
Transmission and Drive Type
- Transmission: 8-speed Tiptronic automatic
- Drive type: quattro all-wheel drive
- Front/rear torque distribution: Variable, up to 70% to rear wheels
- Optional sport differential for enhanced cornering
Acceleration and Top Speed
- 0-60 mph acceleration: 5.6 seconds
- Top speed: 155 mph (electronically limited)
- Quarter mile time: 14.1 seconds @ 97 mph
- Standing kilometer time: 25.9 seconds
Fuel Efficiency
This section provides information on the fuel efficiency of the 3.0L engine, including EPA ratings and fuel tank capacity. It also covers fuel-saving technologies.
Fuel Efficiency
This section provides information on the fuel efficiency of the 3.0L engine, including EPA ratings and fuel tank capacity. It also covers fuel-saving technologies.
EPA Ratings
- City: 20 mpg
- Highway: 28 mpg
- Combined: 23 mpg
- Fuel type: Premium unleaded (91 octane or higher)
Fuel Tank and Range
- Fuel tank capacity: 15.3 gallons
- Estimated city range: 306 miles
- Estimated highway range: 428 miles
- Estimated combined range: 351 miles
Fuel-Saving Technologies
- Engine start/stop system
- Coasting function with engine disconnect
- Efficient thermal management system
- Optimized transmission gear ratios
Emissions and Compliance
This section covers the emissions standards and compliance information for the 3.0L engine, including emissions control systems and environmental impact.
Emissions and Compliance
This section covers the emissions standards and compliance information for the 3.0L engine, including emissions control systems and environmental impact.
Emissions Standards
- Emissions standard: EU6
- EPA emissions certification: Tier 3 Bin 70
- Particulate matter (PM) emissions: 0.04 g/mile
- Nitrogen oxides (NOx) emissions: 0.02 g/mile
Emissions Control Systems
- Selective catalytic reduction (SCR) system
- Exhaust gas recirculation (EGR)
- Diesel particulate filter (DPF)
- Fuel injection system optimization
Environmental Impact
- Reduced CO2 emissions: 208 g/mile
- Lower sulfur emissions
- Improved fuel efficiency
- Recyclable materials in engine construction
Maintenance Requirements
This section outlines the recommended maintenance schedule and requirements for the 3.0L engine, including service intervals and fluid specifications.
Maintenance Requirements
This section outlines the recommended maintenance schedule and requirements for the 3.0L engine, including service intervals and fluid specifications.
Service Intervals
- Oil change interval: Every 10,000 miles or 12 months
- Spark plug replacement: Every 60,000 miles
- Belt replacement: Every 90,000 miles
- Brake fluid change: Every 2 years or 20,000 miles
Fluid Specifications
- Engine oil: 5W-30 synthetic oil
- Transmission fluid: Audi-approved ATF
- Coolant: 50/50 mix of Audi-approved antifreeze
- Brake fluid: DOT 4 LV
Recommended Maintenance
- Regular tire pressure checks
- Wheel alignment every 12,000 miles
- Battery maintenance every 6 months
- Air filter replacement every 15,000 miles
Technology and Innovations
This section highlights the advanced technologies and innovations featured in the 3.0L engine, including fuel injection systems, turbocharging, and engine management.
Technology and Innovations
This section highlights the advanced technologies and innovations featured in the 3.0L engine, including fuel injection systems, turbocharging, and engine management.
Fuel Injection System
- High-pressure direct fuel injection (up to 250 bar)
- Multiple injection patterns for optimized combustion
- Fuel injectors with flow-optimized nozzles
- Real-time fuel pressure adjustment
Turbocharging System
- Single turbocharger with variable turbine geometry
- Electrically actuated wastegate
- Intercooler with optimized cooling efficiency
- Turbocharger speed up to 200,000 rpm
Engine Management System
- Advanced engine control unit (ECU)
- Real-time monitoring of engine parameters
- Adaptive knock control for optimized ignition timing
- Integrated exhaust gas recirculation control
Valvetrain and Cylinder Head
- Dual overhead camshafts with variable valve timing
- Hydraulic lash adjusters for reduced maintenance
- Flow-optimized intake and exhaust ports
- Lightweight aluminum alloy construction
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
Overview
- Type
- V6
- Configuration
- 90-degree V6
- Platform
- Audi MLB Evo
- Material
- Aluminum alloy
- Location
- Longitudinal front engine
Dimensions
- Length
- 20.67 in (525 mm)
- Width
- 22.83 in (580 mm)
- Height
- 24.80 in (630 mm)
- Dry Weight
- 420 lbs (190 kg)
- Cylinder Bore
- 3.27 in (83 mm)
- Stroke
- 3.48 in (88.3 mm)
- Displacement
- 3.0 liters (182.9 cubic inches)
Materials
- Engine Block
- Aluminum alloy with cast iron sleeves
- Cylinder Head
- Aluminum alloy
- Valves
- Stainless steel
- Pistons
- Forged aluminum
- Crankshaft
- Forged steel
Features
- Fuel System
-
- Direct fuel injection
- Fuel Stratified Injection (FSI)
- High-pressure fuel pump (up to 200 bar)
- Emission Control
-
- Catalytic converter
- Exhaust gas recirculation (EGR)
- Selectively Catalytic Reduction (SCR) system
- Cooling System
-
- Dual water pumps
- Separate cooling circuits for engine and turbochargers
- Electric cooling fan
- Engine Management
-
- Bosch engine control unit
- Knock sensor system
- Electronic throttle control
- Performance Enhancements
-
- Turbocharging
- Variable Valve Timing (VVT)
- Liftshift system for cylinder deactivation
Safety Features
- Engine Protection
-
- Engine immobilizer
- Fuel cut-off in case of collision
- Crankshaft position sensor monitoring
- Thermal Management
-
- Over-temperature protection
- Coolant level monitoring
- Exhaust system thermal shielding
- Mechanical Safety
-
- Dual-row timing chain
- Reinforced engine mounts
- Fail-safe cooling mode
Comfort Features
- Noise Reduction
-
- Balanced crankshaft
- Dual-mass flywheel
- Acoustic engine cover
- Smooth Operation
-
- Hydraulic engine mounts
- Low-vibration crankshaft
- Electronic damping control
- Efficiency
-
- Start/Stop technology
- Energy recuperation system
- Low-friction engine components
- Temperature Control
-
- Rapid warm-up catalyst
- Adaptive cooling system
- Pre-heating system for cold starts
Accessories
- Engine Accessories
-
- Engine cover
- Timing belt cover
- Oil dipstick
- Coolant reservoir
- Performance Accessories
-
- High-performance air filter
- Engine tuning software
- Sport exhaust system
- Protection Accessories
-
- Engine skid plate
- Heat shield
- Oil pan protection
Maintenance
- Service interval
- 5,000 to 7,500 miles (8,000 to 12,000 km)
- Service Items
-
- Oil and filter change
- Inspect air filter
- Check coolant level
- Inspect belts and hoses
- Check brake fluid level
- Inspect tire pressure
- Maintenance Notes
- Recommended synthetic oil 5W-40. Spark plug replacement every 30,000 miles.
Warranty
- Basic Warranty
- Coverage: 4 years / 50,000 milesDescription: New vehicle limited warranty
- Powertrain Warranty
- Coverage: 4 years / 50,000 milesDescription: Powertrain components coverage
- Corrosion Warranty
- Coverage: 12 years / Unlimited milesDescription: Perforation warranty for body panels
- Emissions Warranty
- Coverage: 4 years / 50,000 milesDescription: Emissions control system warranty
Production Details
- Manufacturer
- Audi AG
- Manufacturing Location
- Hungary (Audi Hungaria Motor Kft)
- Manufacturing Process
-
- CNC machining
- Aluminum casting
- Robotized assembly
- Laser welding
- Quality control testing
- Quality Control
- inspection: End-of-line testingCertifications: ISO 9001, IATF 16949Testing: Performance benchmarks, Emissions testing, Durability testing
- Sustainability Practices
-
- Use of recycled materials
- Energy-efficient manufacturing
- Emission reduction technologies in production
- Production Metrics
- Annual Production: Over 100,000 unitsProduction Since: 2016Engine Variant: Over 10 different applications
Service Information for 3.0l engine Service
Maintenance and service requirements specific to this component
- Oil and filter change
- Inspect air filter
- Check coolant level
- Inspect belts and hoses
- Check brake fluid level
- Inspect tire pressure
Recommended synthetic oil 5W-40. Spark plug replacement every 30,000 miles.
- Replace air filter
- Inspect spark plugs
- Check PCV valve
- Inspect fuel system
- Check transmission fluid level
- Inspect exhaust system
Special tools or conditions for this service interval
- Replace spark plugs
- Inspect and replace timing belt if necessary
- Check engine mounts
- Inspect cooling system hoses
- Replace brake fluid
- Inspect suspension components
Critical warnings or requirements for major service
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L TFSI engine in the 2017-Present Audi A4?
What is the horsepower and torque output of the 3.0L TFSI engine in the 2017-Present Audi A4?
The 3.0L TFSI V6 engine in the Audi A4 produces 354 horsepower at 5,400-6,400 RPM and 369 lb-ft of torque at 1,370-4,500 RPM. This engine features a turbocharged direct injection system for optimal performance and efficiency.
Q2 What type of fuel is recommended for the 3.0L TFSI engine?
What type of fuel is recommended for the 3.0L TFSI engine?
Audi recommends using premium unleaded gasoline with an octane rating of 91 or higher for the 3.0L TFSI engine. Using lower-octane fuel may result in reduced performance and efficiency.
Q3 What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
What is the oil capacity and recommended oil type for the 3.0L TFSI engine?
The 3.0L TFSI engine has an oil capacity of approximately 7.2 liters (7.6 quarts). Audi recommends using synthetic engine oil with a viscosity grade of SAE 5W-40 or 0W-40 that meets the VW 502 00 or VW 504 00 specification.
Q4 What is the service interval for the 3.0L TFSI engine?
What is the service interval for the 3.0L TFSI engine?
Audi recommends servicing the 3.0L TFSI engine every 10,000 miles or 12 months, whichever comes first. This includes oil changes, filter replacements, and inspections of critical components such as the timing belt, spark plugs, and turbocharger system.
Q5 Does the 3.0L TFSI engine require a timing belt or timing chain?
Does the 3.0L TFSI engine require a timing belt or timing chain?
The 3.0L TFSI engine uses a timing chain, which is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended to ensure proper tension and alignment.
Q6 What is the compression ratio of the 3.0L TFSI engine?
What is the compression ratio of the 3.0L TFSI engine?
The 3.0L TFSI engine has a compression ratio of 10.8:1, which is optimized for both performance and fuel efficiency in conjunction with its turbocharging system.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Audi 3.0L TFSI Engine Technical Overview
Coming SoonA detailed technical guide covering the design, specifications, and performance characteristics of the 3.0L TFSI engine.
Audi A4 Maintenance Schedule
Coming SoonThe official maintenance schedule for the 2017-Present Audi A4, including service intervals and recommended procedures for the 3.0L TFSI engine.
Audi Genuine Parts Catalog
Coming SoonAccess the official catalog of genuine Audi parts for the 3.0L TFSI engine, ensuring compatibility and optimal performance.
Audi Warranty and Service Information
Coming SoonLearn about the warranty coverage for the 3.0L TFSI engine and the importance of using authorized Audi service centers.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.